[PATCH 07/11] irqchip: stm32: add stm32mp1 support with hierarchy domain

Ludovic BARRE ludovic.barre at st.com
Thu May 3 02:55:00 PDT 2018



On 05/02/2018 07:45 PM, Rob Herring wrote:
> On Wed, May 2, 2018 at 11:03 AM, Ludovic BARRE <ludovic.barre at st.com> wrote:
>> Hi Rob
>>
>>
>>
>> On 05/01/2018 04:56 PM, Rob Herring wrote:
>>>
>>> On Thu, Apr 26, 2018 at 06:18:30PM +0200, Ludovic Barre wrote:
>>>>
>>>> From: Ludovic Barre <ludovic.barre at st.com>
>>>>
>>>> Exti controller has been differently integrated on stm32mp1 SoC.
>>>> A parent irq has only one external interrupt. A hierachy domain could
>>>> be used. Handlers are call by parent, each parent interrupt could be
>>>> masked and unmasked according to the needs.
>>>>
>>>> Signed-off-by: Ludovic Barre <ludovic.barre at st.com>
>>>> ---
>>>>    .../interrupt-controller/st,stm32-exti.txt         |   3 +
>>>>    drivers/irqchip/irq-stm32-exti.c                   | 322
>>>> +++++++++++++++++++++
>>>>    2 files changed, 325 insertions(+)
>>>>
>>>> diff --git
>>>> a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
>>>> b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
>>>> index edf03f0..136bd61 100644
>>>> ---
>>>> a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
>>>> +++
>>>> b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt
>>>> @@ -5,11 +5,14 @@ Required properties:
>>>>    - compatible: Should be:
>>>>        "st,stm32-exti"
>>>>        "st,stm32h7-exti"
>>>> +    "st,stm32mp1-exti"
>>>>    - reg: Specifies base physical address and size of the registers
>>>>    - interrupt-controller: Indentifies the node as an interrupt controller
>>>>    - #interrupt-cells: Specifies the number of cells to encode an
>>>> interrupt
>>>>      specifier, shall be 2
>>>>    - interrupts: interrupts references to primary interrupt controller
>>>> +  (only needed for exti controller with multiple exti under
>>>> +  same parent interrupt: st,stm32-exti and st,stm32h7-exti")
>>>>      Example:
>>>>    diff --git a/drivers/irqchip/irq-stm32-exti.c
>>>> b/drivers/irqchip/irq-stm32-exti.c
>>>> index b38c655..ebf7146 100644
>>>> --- a/drivers/irqchip/irq-stm32-exti.c
>>>> +++ b/drivers/irqchip/irq-stm32-exti.c
>>>
>>>
>>> [...]
>>>
>>>> +static const struct stm32_desc_irq stm32mp1_desc_irq[] = {
>>>> +       { .exti = 1, .irq_parent = 7 },
>>>> +       { .exti = 2, .irq_parent = 8 },
>>>> +       { .exti = 3, .irq_parent = 9 },
>>>> +       { .exti = 4, .irq_parent = 10 },
>>>> +       { .exti = 5, .irq_parent = 23 },
>>>> +       { .exti = 6, .irq_parent = 64 },
>>>> +       { .exti = 7, .irq_parent = 65 },
>>>> +       { .exti = 8, .irq_parent = 66 },
>>>> +       { .exti = 9, .irq_parent = 67 },
>>>> +       { .exti = 10, .irq_parent = 40 },
>>>> +       { .exti = 11, .irq_parent = 42 },
>>>> +       { .exti = 12, .irq_parent = 76 },
>>>> +       { .exti = 13, .irq_parent = 77 },
>>>> +       { .exti = 14, .irq_parent = 121 },
>>>> +       { .exti = 15, .irq_parent = 127 },
>>>> +       { .exti = 16, .irq_parent = 1 },
>>>> +       { .exti = 65, .irq_parent = 144 },
>>>> +       { .exti = 68, .irq_parent = 143 },
>>>> +       { .exti = 73, .irq_parent = 129 },
>>>> +};
>>>
>>>
>>> You can use an interrupt-map property rather than put this into the
>>> driver.
>>
>>
>> interrupt-map seemed interesting and promising like used in pci host.
>> At first sight this property can't be used into node with
>> "interrupt-controller" property (see in drivers/of/irq.c function:
>> of_irq_parse_raw) because "of_irq_parse_raw" checks if node got
>> it first, and after lookup the interrupt-map.
>>
>> Rob, Thomas, Jason, Marc what do you prefers or the right ways...?
> 
> I believe the correct thing to do is simply drop "interrupt-controller".

if I drop "interrupt-controller" of my node, my driver will not be
initialized by "of_irq_init"
(start_kernel->init_IRQ->irqchip_init->of_irq_init).
Probably, we could replace "IRQCHIP_DECLARE" by a
"module_platform_driver" or "postcore_initcall" but I'm not a big fan of
this solution. what do you think ?

> 
> Rob
> 



More information about the linux-arm-kernel mailing list