[linux-sunxi] [PATCH 13/16] arm: dts: sun8i: h3: add thermal zone to H3

[Philipp Rossak]

On 26.01.2018 17:26, Samuel Holland wrote:
> On 01/26/18 09:19, Philipp Rossak wrote:
>> This patch adds the thermal zones to the H3. We have only one sensor and
>> that is placed in the cpu.
>>
>> Signed-off-by: Philipp Rossak <embed3d at gmail.com>
>> ---
>>   arch/arm/boot/dts/sun8i-h3.dtsi | 9 +++++++++
>>   1 file changed, 9 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
>> index fbb007e5798e..3f83f6a27c74 100644
>> --- a/arch/arm/boot/dts/sun8i-h3.dtsi
>> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
>> @@ -72,6 +72,15 @@
>>   		};
>>   	};
>>   
>> +	thermal-zones {
>> +		cpu-thermal {
>> +			/* milliseconds */
>> +			polling-delay-passive = <250>;
>> +			polling-delay = <1000>;
>> +			thermal-sensors = <&ths 0>;
> 
> If #thermal-sensor-cells = <0>, shouldn't this just be <&ths> ?
I think both works, but I my intention was to have an accurate 
description in DT.
I thought that that is important in DT.

>> +		};
>> +	};
>> +
>>   	timer {
>>   		compatible = "arm,armv7-timer";
>>   		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>>
> 
> Thanks,
> Samuel
> 
Regards,
Philipp