[linux-sunxi] [PATCH 13/16] arm: dts: sun8i: h3: add thermal zone to H3

[Samuel Holland]

On 01/26/18 09:19, Philipp Rossak wrote:
> This patch adds the thermal zones to the H3. We have only one sensor and
> that is placed in the cpu.
> 
> Signed-off-by: Philipp Rossak <embed3d at gmail.com>
> ---
>  arch/arm/boot/dts/sun8i-h3.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
> index fbb007e5798e..3f83f6a27c74 100644
> --- a/arch/arm/boot/dts/sun8i-h3.dtsi
> +++ b/arch/arm/boot/dts/sun8i-h3.dtsi
> @@ -72,6 +72,15 @@
>  		};
>  	};
>  
> +	thermal-zones {
> +		cpu-thermal {
> +			/* milliseconds */
> +			polling-delay-passive = <250>;
> +			polling-delay = <1000>;
> +			thermal-sensors = <&ths 0>;

If #thermal-sensor-cells = <0>, shouldn't this just be <&ths> ?

> +		};
> +	};
> +
>  	timer {
>  		compatible = "arm,armv7-timer";
>  		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> 

Thanks,
Samuel