[PATCH v1 12/19] arm: dts: mt7623: fix all Warnings (unit_address_vs_reg)
sean.wang at mediatek.com
sean.wang at mediatek.com
Fri Feb 23 02:16:32 PST 2018
From: Sean Wang <sean.wang at mediatek.com>
Fix below a lot of warnings that dtc complains so much
Warning (unit_address_vs_reg): Node /oscillator at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /oscillator at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pinctrl at 10005000/cir at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pinctrl at 10005000/i2c at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pinctrl at 10005000/i2c at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pinctrl at 10005000/i2s at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pinctrl at 10005000/i2s at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pinctrl at 10005000/keys at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pinctrl at 10005000/leds at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pinctrl at 10005000/pwm at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pinctrl at 10005000/spi at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pinctrl at 10005000/uart at 0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pinctrl at 10005000/uart at 1 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /pinctrl at 10005000/uart at 2 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /ethernet at 1b100000/mdio-bus/switch at 0/ports has a reg or ranges property, but no unit name
Signed-off-by: Sean Wang <sean.wang at mediatek.com>
Cc: Rob Herring <robh+dt at kernel.org>
Cc: Mark Rutland <mark.rutland at arm.com>
Cc: devicetree at vger.kernel.org
---
arch/arm/boot/dts/mt7623.dtsi | 4 ++--
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 29 +++++++++++++--------------
arch/arm/boot/dts/mt7623n-rfb.dtsi | 2 +-
3 files changed, 17 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 4b68448..bf9db44 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -130,14 +130,14 @@
#clock-cells = <0>;
};
- rtc32k: oscillator at 1 {
+ rtc32k: oscillator-1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32000>;
clock-output-names = "rtc32k";
};
- clk26m: oscillator at 0 {
+ clk26m: oscillator-0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index a6295ef..75e61c4 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -158,7 +158,6 @@
ports {
#address-cells = <1>;
#size-cells = <0>;
- reg = <0>;
port at 0 {
reg = <0>;
@@ -262,14 +261,14 @@
};
&pio {
- cir_pins_a:cir at 0 {
+ cir_pins_a:cir-default {
pins-cir {
pinmux = <MT7623_PIN_46_IR_FUNC_IR>;
bias-disable;
};
};
- i2c0_pins_a: i2c at 0 {
+ i2c0_pins_a: i2c0-default {
pins-i2c0 {
pinmux = <MT7623_PIN_75_SDA0_FUNC_SDA0>,
<MT7623_PIN_76_SCL0_FUNC_SCL0>;
@@ -277,7 +276,7 @@
};
};
- i2c1_pins_a: i2c at 1 {
+ i2c1_pins_a: i2c1-default {
pin-i2c1 {
pinmux = <MT7623_PIN_57_SDA1_FUNC_SDA1>,
<MT7623_PIN_58_SCL1_FUNC_SCL1>;
@@ -285,7 +284,7 @@
};
};
- i2s0_pins_a: i2s at 0 {
+ i2s0_pins_a: i2s0-default {
pin-i2s0 {
pinmux = <MT7623_PIN_49_I2S0_DATA_FUNC_I2S0_DATA>,
<MT7623_PIN_72_I2S0_DATA_IN_FUNC_I2S0_DATA_IN>,
@@ -297,7 +296,7 @@
};
};
- i2s1_pins_a: i2s at 1 {
+ i2s1_pins_b: i2s1-default {
pin-i2s1 {
pinmux = <MT7623_PIN_33_I2S1_DATA_FUNC_I2S1_DATA>,
<MT7623_PIN_34_I2S1_DATA_IN_FUNC_I2S1_DATA_IN>,
@@ -309,7 +308,7 @@
};
};
- key_pins_a: keys at 0 {
+ key_pins_a: keys-alt {
pins-keys {
pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
<MT7623_PIN_257_GPIO257_FUNC_GPIO257> ;
@@ -317,7 +316,7 @@
};
};
- led_pins_a: leds at 0 {
+ led_pins_a: leds-alt {
pins-leds {
pinmux = <MT7623_PIN_239_EXT_SDIO0_FUNC_GPIO239>,
<MT7623_PIN_240_EXT_XCS_FUNC_GPIO240>,
@@ -428,15 +427,15 @@
};
};
- pcie_default: pcie_pin_default {
- pins_cmd_dat {
+ pcie_default: pcie-pin-default {
+ pins-cmd-dat {
pinmux = <MT7623_PIN_208_AUD_EXT_CK1_FUNC_PCIE0_PERST_N>,
<MT7623_PIN_209_AUD_EXT_CK2_FUNC_PCIE1_PERST_N>;
bias-disable;
};
};
- pwm_pins_a: pwm at 0 {
+ pwm_pins_a: pwm-default {
pins-pwm {
pinmux = <MT7623_PIN_203_PWM0_FUNC_PWM0>,
<MT7623_PIN_204_PWM1_FUNC_PWM1>,
@@ -446,7 +445,7 @@
};
};
- spi0_pins_a: spi at 0 {
+ spi0_pins_a: spi0-default {
pins-spi {
pinmux = <MT7623_PIN_53_SPI0_CSN_FUNC_SPI0_CS>,
<MT7623_PIN_54_SPI0_CK_FUNC_SPI0_CK>,
@@ -456,21 +455,21 @@
};
};
- uart0_pins_a: uart at 0 {
+ uart0_pins_a: uart0-default {
pins-dat {
pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
<MT7623_PIN_80_UTXD0_FUNC_UTXD0>;
};
};
- uart1_pins_a: uart at 1 {
+ uart1_pins_a: uart1-default {
pins-dat {
pinmux = <MT7623_PIN_81_URXD1_FUNC_URXD1>,
<MT7623_PIN_82_UTXD1_FUNC_UTXD1>;
};
};
- uart2_pins_a: uart at 2 {
+ uart2_pins_a: uart2-default {
pins-dat {
pinmux = <MT7623_PIN_14_GPIO14_FUNC_URXD2>,
<MT7623_PIN_15_GPIO15_FUNC_UTXD2>;
diff --git a/arch/arm/boot/dts/mt7623n-rfb.dtsi b/arch/arm/boot/dts/mt7623n-rfb.dtsi
index 256c5fd..128586d 100644
--- a/arch/arm/boot/dts/mt7623n-rfb.dtsi
+++ b/arch/arm/boot/dts/mt7623n-rfb.dtsi
@@ -50,7 +50,7 @@
reg = <0 0x80000000 0 0x40000000>;
};
- usb_p1_vbus: regulator at 0 {
+ usb_p1_vbus: regulator-5v {
compatible = "regulator-fixed";
regulator-name = "usb_vbus";
regulator-min-microvolt = <5000000>;
--
2.7.4
More information about the linux-arm-kernel
mailing list