[PATCH v1 13/19] arm: dts: mt7623: move node mt6323 leds to mt6323.dtsi

[sean.wang at mediatek.com]

From: Sean Wang <sean.wang at mediatek.com>

Since those LEDs are parts of PMIC MT6323, it is reasonable to merge
those LEDs node definition back into mt6323.dtsi. This way can improve
the reusability of those nodes among different boards with the same PMIC.

Signed-off-by: Sean Wang <sean.wang at mediatek.com>
Cc: Lee Jones <lee.jones at linaro.org>
---
 arch/arm/boot/dts/mt6323.dtsi                 | 26 ++++++++++++++++++++++++-
 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 28 ---------------------------
 2 files changed, 25 insertions(+), 29 deletions(-)

diff --git a/arch/arm/boot/dts/mt6323.dtsi b/arch/arm/boot/dts/mt6323.dtsi
index 7c783d6..44c5642 100644
--- a/arch/arm/boot/dts/mt6323.dtsi
+++ b/arch/arm/boot/dts/mt6323.dtsi
@@ -1,5 +1,5 @@
 /*
- * Copyright (c) 2017 MediaTek Inc.
+ * Copyright (c) 2017-2018 MediaTek Inc.
  * Author: John Crispin <john at phrozen.org>
  *	   Sean Wang <sean.wang at mediatek.com>
  * This program is free software; you can redistribute it and/or modify
@@ -237,5 +237,29 @@
 				regulator-enable-ramp-delay = <216>;
 			};
 		};
+
+		leds {
+			compatible = "mediatek,mt6323-led";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led at 0 {
+				reg = <0>;
+				label = "mt6323:isink:green";
+				default-state = "off";
+			};
+
+			led at 1 {
+				reg = <1>;
+				label = "mt6323:isink:red";
+				default-state = "off";
+			};
+
+			led at 2 {
+				reg = <2>;
+				label = "mt6323:isink:blue";
+				default-state = "off";
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
index 75e61c4..767b225 100644
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -483,34 +483,6 @@
 	status = "okay";
 };
 
-&pwrap {
-	mt6323 {
-		mt6323led: led {
-			compatible = "mediatek,mt6323-led";
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			led at 0 {
-				reg = <0>;
-				label = "bpi-r2:isink:green";
-				default-state = "off";
-			};
-
-			led at 1 {
-				reg = <1>;
-				label = "bpi-r2:isink:red";
-				default-state = "off";
-			};
-
-			led at 2 {
-				reg = <2>;
-				label = "bpi-r2:isink:blue";
-				default-state = "off";
-			};
-		};
-	};
-};
-
 &spi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi0_pins_a>;
-- 
2.7.4