[RFC] ARM: dts: imx28-tx28: Pass the memory unit name
Lothar Waßmann
LW at KARO-electronics.de
Mon Feb 19 04:06:24 PST 2018
Hi,
On Sat, 17 Feb 2018 13:41:43 -0200 Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at nxp.com>
>
> Pass the memory unit name in order to fix the following
> dtc warning with W=1:
>
> arch/arm/boot/dts/imx28-tx28.dtb: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
>
> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
> ---
> Hi,
>
> Currently the only dtc warnings observed with W=1 are the ones:
> Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name
>
> If this solution can be accepted I can clean all the other i.MX dts files.
>
> Please advise.
>
> arch/arm/boot/dts/imx28-tx28.dts | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
> index 8a4f5bc..bbdf004 100644
> --- a/arch/arm/boot/dts/imx28-tx28.dts
> +++ b/arch/arm/boot/dts/imx28-tx28.dts
> @@ -65,8 +65,8 @@
> usbotg = &usb0;
> };
>
> - memory {
> - reg = <0 0>; /* will be filled in by U-Boot */
> + memory at 40000000 {
> + reg = <0x40000000 0>; /* will be filled in by U-Boot */
> };
>
> onewire {
>
I have no objections to this change. U-Boot still finds the memory node
and puts the correct size into the 'reg' property.
Acked-by: Lothar Waßmann <LW at KARO-electronics.de>
Lothar Waßmann
More information about the linux-arm-kernel
mailing list