[RFC] ARM: dts: imx28-tx28: Pass the memory unit name

[Fabio Estevam]

From: Fabio Estevam <fabio.estevam at nxp.com>

Pass the memory unit name in order to fix the following
dtc warning with W=1:

arch/arm/boot/dts/imx28-tx28.dtb: Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name

Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
---
Hi,

Currently the only dtc warnings observed with W=1 are the ones:
Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but no unit name

If this solution can be accepted I can clean all the other i.MX dts files.

Please advise.

 arch/arm/boot/dts/imx28-tx28.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 8a4f5bc..bbdf004 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -65,8 +65,8 @@
 		usbotg = &usb0;
 	};
 
-	memory {
-		reg = <0 0>; /* will be filled in by U-Boot */
+	memory at 40000000 {
+		reg = <0x40000000 0>; /* will be filled in by U-Boot */
 	};
 
 	onewire {
-- 
2.7.4