[PATCH v2 1/2] pinctrl/samsung: Correct EINTG banks order

[Tomasz Figa]

2018-04-17 0:52 GMT+09:00 Paweł Chmiel <pawel.mikolaj.chmiel at gmail.com>:
> All banks with GPIO interrupts should be at beginning
> of bank array and without any other types of banks between them.
> This order is expected by exynos_eint_gpio_irq, when doing
> interrupt group to bank translation.
> Otherwise, kernel NULL pointer dereference would happen
> when trying to handle interrupt, due to wrong bank being looked up.
> Observed on s5pv210, when trying to handle gpj0 interrupt,
> where kernel was mapping it to gpi bank.
>
> Cc: stable at vger.kernel.org
> Fixes: 023e06dfa6882f500b9c86fd61f0b1913aa07f36 ("pinctrl: exynos: add exynos5410 SoC specific data")
> Fixes: 608a26a7bc04a39cfd7041f31ca2b2100113d14e ("pinctrl: Add s5pv210 support to pinctrl-exynos)
> Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel at gmail.com>
> ---
>
> Changes from v1:
>   - Limit changes to s5pv210 and Exynos5410. Exynos3250 will be handled later.
>   - Added cc stable
>   - Added fixes tag
> ---
>  drivers/pinctrl/samsung/pinctrl-exynos-arm.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

Reviewed-by: Tomasz Figa <tomasz.figa at gmail.com>

Thanks for the patch!

Best regards,
Tomasz