[PATCH v2 1/2] pinctrl/samsung: Correct EINTG banks order

[Paweł Chmiel]

All banks with GPIO interrupts should be at beginning
of bank array and without any other types of banks between them.
This order is expected by exynos_eint_gpio_irq, when doing
interrupt group to bank translation.
Otherwise, kernel NULL pointer dereference would happen
when trying to handle interrupt, due to wrong bank being looked up.
Observed on s5pv210, when trying to handle gpj0 interrupt,
where kernel was mapping it to gpi bank.

Cc: stable at vger.kernel.org
Fixes: 023e06dfa6882f500b9c86fd61f0b1913aa07f36 ("pinctrl: exynos: add exynos5410 SoC specific data")
Fixes: 608a26a7bc04a39cfd7041f31ca2b2100113d14e ("pinctrl: Add s5pv210 support to pinctrl-exynos)
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel at gmail.com>
---

Changes from v1:
  - Limit changes to s5pv210 and Exynos5410. Exynos3250 will be handled later.
  - Added cc stable
  - Added fixes tag
---
 drivers/pinctrl/samsung/pinctrl-exynos-arm.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm.c
index 90c2744..4f4ae66 100644
--- a/drivers/pinctrl/samsung/pinctrl-exynos-arm.c
+++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm.c
@@ -105,12 +105,12 @@ static const struct samsung_pin_bank_data s5pv210_pin_bank[] __initconst = {
 	EXYNOS_PIN_BANK_EINTG(7, 0x1c0, "gpg1", 0x38),
 	EXYNOS_PIN_BANK_EINTG(7, 0x1e0, "gpg2", 0x3c),
 	EXYNOS_PIN_BANK_EINTG(7, 0x200, "gpg3", 0x40),
-	EXYNOS_PIN_BANK_EINTN(7, 0x220, "gpi"),
 	EXYNOS_PIN_BANK_EINTG(8, 0x240, "gpj0", 0x44),
 	EXYNOS_PIN_BANK_EINTG(6, 0x260, "gpj1", 0x48),
 	EXYNOS_PIN_BANK_EINTG(8, 0x280, "gpj2", 0x4c),
 	EXYNOS_PIN_BANK_EINTG(8, 0x2a0, "gpj3", 0x50),
 	EXYNOS_PIN_BANK_EINTG(5, 0x2c0, "gpj4", 0x54),
+	EXYNOS_PIN_BANK_EINTN(7, 0x220, "gpi"),
 	EXYNOS_PIN_BANK_EINTN(8, 0x2e0, "mp01"),
 	EXYNOS_PIN_BANK_EINTN(4, 0x300, "mp02"),
 	EXYNOS_PIN_BANK_EINTN(8, 0x320, "mp03"),
@@ -630,7 +630,6 @@ static const struct samsung_pin_bank_data exynos5410_pin_banks0[] __initconst =
 	EXYNOS_PIN_BANK_EINTG(4, 0x100, "gpc3", 0x20),
 	EXYNOS_PIN_BANK_EINTG(7, 0x120, "gpc1", 0x24),
 	EXYNOS_PIN_BANK_EINTG(7, 0x140, "gpc2", 0x28),
-	EXYNOS_PIN_BANK_EINTN(2, 0x160, "gpm5"),
 	EXYNOS_PIN_BANK_EINTG(8, 0x180, "gpd1", 0x2c),
 	EXYNOS_PIN_BANK_EINTG(8, 0x1A0, "gpe0", 0x30),
 	EXYNOS_PIN_BANK_EINTG(2, 0x1C0, "gpe1", 0x34),
@@ -641,6 +640,7 @@ static const struct samsung_pin_bank_data exynos5410_pin_banks0[] __initconst =
 	EXYNOS_PIN_BANK_EINTG(2, 0x260, "gpg2", 0x48),
 	EXYNOS_PIN_BANK_EINTG(4, 0x280, "gph0", 0x4c),
 	EXYNOS_PIN_BANK_EINTG(8, 0x2A0, "gph1", 0x50),
+	EXYNOS_PIN_BANK_EINTN(2, 0x160, "gpm5"),
 	EXYNOS_PIN_BANK_EINTN(8, 0x2C0, "gpm7"),
 	EXYNOS_PIN_BANK_EINTN(6, 0x2E0, "gpy0"),
 	EXYNOS_PIN_BANK_EINTN(4, 0x300, "gpy1"),
-- 
2.7.4