[PATCH v4 1/6] dt-bindings: update the Allwinner GPADC device tree binding for H3

[Maxime Ripard]

On Mon, Sep 18, 2017 at 03:36:43PM +0800, Icenowy Zheng wrote:
> 于 2017年9月18日 GMT+08:00 下午3:33:36, Maxime Ripard <maxime.ripard at free-electrons.com> 写到:
> >On Thu, Sep 14, 2017 at 10:52:46PM +0800, Icenowy Zheng wrote:
> >> Allwinner H3 features a thermal sensor like the one in A33, but has
> >its
> >> register re-arranged, the clock divider moved to CCU (originally the
> >> clock divider is in ADC) and added a pair of bus clock and reset.
> >> 
> >> Update the binding document to cover H3.
> >> 
> >> Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
> >> Reviewed-by: Chen-Yu Tsai <wens at csie.org>
> >> ---
> >> Changes in v4:
> >> - Add nvmem calibration data (not yet used by the driver)
> >> Changes in v3:
> >> - Clock name changes.
> >> - Example node name changes.
> >> - Add interupts (not yet used by the driver).
> >> 
> >>  .../devicetree/bindings/mfd/sun4i-gpadc.txt        | 30
> >++++++++++++++++++++--
> >>  1 file changed, 28 insertions(+), 2 deletions(-)
> >> 
> >> diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> >b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> >> index badff3611a98..6c470d584bf9 100644
> >> --- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> >> +++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> >> @@ -4,12 +4,26 @@ The Allwinner SoCs all have an ADC that can also
> >act as a thermal sensor
> >>  and sometimes as a touchscreen controller.
> >>  
> >>  Required properties:
> >> -  - compatible: "allwinner,sun8i-a33-ths",
> >> +  - compatible: must contain one of the following compatibles:
> >> +		- "allwinner,sun8i-a33-ths"
> >> +		- "allwinner,sun8i-h3-ths"
> >>    - reg: mmio address range of the chip,
> >>    - #thermal-sensor-cells: shall be 0,
> >>    - #io-channel-cells: shall be 0,
> >>  
> >> -Example:
> >> +Optional properties:
> >> +  - nvmem-cells: A phandle to the calibration data provided by a
> >nvmem device.
> >> +                 If unspecified default values shall be used.
> >> +  - nvmem-cell-names: Should be "calibration-data"
> >
> >I'd prefer to have which sensor it applies to here. It wouldn't change
> >anything for the H3, but it definitely does for example for the A83t
> >that has two sensors, one for each cluster, and one for the GPU, each
> >with calibration data.
> >
> >What about cluster0-calibration?
> 
> The calibration data is in fact a 2 word (8 bytes) zone,
> which is reserved for 4 sensors on all SoCs, even on H3.
> It's half word per sensor.
> 
> I prefer to just assume a 2 word cell for every SoC.

You have three different data sources, it should be reprensented as
such.

Otherwise, the client has to get some knowledge of how the data are
stored in the provider, which is an abstraction violation.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170918/f7a804e9/attachment-0001.sig>