[PATCH 3/3] thermal: armada: add support for CP110
Eduardo Valentin
edubezval at gmail.com
Wed Nov 22 08:23:36 PST 2017
On Wed, Nov 22, 2017 at 04:42:05PM +0200, Baruch Siach wrote:
> The CP110 component is integrated in the Armada 8k and 7k lines of processors.
>
> This patch also adds an option of offset to the MSB of the control
> register. The existing DT binding for Armada 38x refers to a single 32 bit
> control register. It turns out that this is actually only the MSB of the
> control area. Changing the binding to fix that would break existing DT files,
> so the Armada 38x binding is left as is.
>
> The new CP110 binding increases the size of the control area to 64 bits, thus
> moving the MSB to offset 4.
>
> Signed-off-by: Baruch Siach <baruch at tkos.co.il>
> ---
> drivers/thermal/armada_thermal.c | 24 ++++++++++++++++++++++--
> 1 file changed, 22 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
> index 1f7f81628040..542db578ce36 100644
> --- a/drivers/thermal/armada_thermal.c
> +++ b/drivers/thermal/armada_thermal.c
> @@ -72,6 +72,7 @@ struct armada_thermal_data {
> unsigned int temp_shift;
> unsigned int temp_mask;
> unsigned int is_valid_shift;
> + unsigned int control_msb_offset;
> };
>
> static void armadaxp_init_sensor(struct platform_device *pdev,
> @@ -141,12 +142,14 @@ static void armada375_init_sensor(struct platform_device *pdev,
> static void armada380_init_sensor(struct platform_device *pdev,
> struct armada_thermal_priv *priv)
> {
> - unsigned long reg = readl_relaxed(priv->control);
> + void __iomem *control_msb =
> + priv->control + priv->data->control_msb_offset;
> + unsigned long reg = readl_relaxed(control_msb);
Will existing users of this function work with default
control_msb_offset? presumably 0, right?
>
> /* Reset hardware once */
> if (!(reg & A380_HW_RESET)) {
> reg |= A380_HW_RESET;
> - writel(reg, priv->control);
> + writel(reg, control_msb);
> mdelay(10);
> }
> }
> @@ -258,6 +261,19 @@ static const struct armada_thermal_data armada_ap806_data = {
> .inverted = true,
> };
>
> +static const struct armada_thermal_data armada_cp110_data = {
> + .is_valid = armada_is_valid,
> + .init_sensor = armada380_init_sensor,
> + .is_valid_shift = 10,
> + .temp_shift = 0,
> + .temp_mask = 0x3ff,
> + .control_msb_offset = 4,
> + .coef_b = 1172499100UL,
> + .coef_m = 2000096UL,
> + .coef_div = 4201,
> + .inverted = true,
> +};
> +
> static const struct of_device_id armada_thermal_id_table[] = {
> {
> .compatible = "marvell,armadaxp-thermal",
> @@ -279,6 +295,10 @@ static const struct of_device_id armada_thermal_id_table[] = {
> .compatible = "marvell,armada-ap806-thermal",
> .data = &armada_ap806_data,
> },
> + {
> + .compatible = "marvell,armada-cp110-thermal",
> + .data = &armada_cp110_data,
> + },
> {
> /* sentinel */
> },
> --
> 2.15.0
>
More information about the linux-arm-kernel
mailing list