[PATCH] ARM: dts: imx6: Remove unneeded address-cells/size-cells
Christopher Spinrath
christopher.spinrath at rwth-aachen.de
Sat Nov 11 06:24:47 PST 2017
Hi Fabio,
(I'm sorry if I've missed some recipients or broke the email thread but
I got Fabio's email from the infradead archive.)
On 11/10/2017 10:12 PM, festevam at gmail.com (Fabio Estevam) wrote:
> From: Fabio Estevam <fabio.estevam at nxp.com>
>
> According to Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt:
>
> "- #address-cells, #size-cells : Must be present if the device has
> sub-nodes representing partitions."
>
> Remove the occurrences of #address-cells/size-cells where no sub-nodes
> representing partitions are present.
This results in a regression for those devices where U-Boot is supposed
to inject the partition sub-nodes. For example, this is the case for
cm-fx6 module based devices like the Utilite Pro.
Linux fails to parse the partitions and reports:
[ 9.330881] spi0.0: error parsing ofpart partition
/soc/aips-bus at 2000000/spba-bus at 2000000/ecspi at 2008000/m25p80 at 0/partition at 0
(/soc/aips-bus at 2000000/spba-bus at 2000000/ecspi at 2008000/m25p80 at 0)
[ 9.330887] mtd: failed to find partitions; one or more parsers
reports errors (-22)
Also, the documentation does not forbid the #address-cells/size-cells if
no partitions are present.
So, please, drop this patch (or exclude at least the cm-fx6 related change).
Thanks!
Christopher
> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
> ---
> arch/arm/boot/dts/imx6q-cm-fx6.dts | 2 --
> arch/arm/boot/dts/imx6q-mccmon6.dts | 2 --
> arch/arm/boot/dts/imx6qdl-aristainetos.dtsi | 2 --
> arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi | 2 --
> arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 2 --
> arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 2 --
> arch/arm/boot/dts/imx6sl-evk.dts | 2 --
> arch/arm/boot/dts/imx6sx-sdb-reva.dts | 4 ----
> arch/arm/boot/dts/imx6sx-sdb.dts | 4 ----
> 9 files changed, 22 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
> index bc7587c..5df84e2 100644
> --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
> +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
> @@ -194,8 +194,6 @@
> status = "okay";
>
> m25p80 at 0 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> compatible = "st,m25p", "jedec,spi-nor";
> spi-max-frequency = <20000000>;
> reg = <0>;
> diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts
> index cab36f4..9636e15 100644
> --- a/arch/arm/boot/dts/imx6q-mccmon6.dts
> +++ b/arch/arm/boot/dts/imx6q-mccmon6.dts
> @@ -90,8 +90,6 @@
> status = "okay";
>
> s25sl032p: flash at 0 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> compatible = "jedec,spi-nor";
> spi-max-frequency = <40000000>;
> reg = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
> index 7d64075..d8f578c 100644
> --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
> @@ -106,8 +106,6 @@
> status = "okay";
>
> flash: m25p80 at 0 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> compatible = "micron,n25q128a11", "jedec,spi-nor";
> spi-max-frequency = <20000000>;
> reg = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
> index 1b18728..5875252 100644
> --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
> @@ -136,8 +136,6 @@
> status = "okay";
>
> flash: m25p80 at 1 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> compatible = "micron,n25q128a11", "jedec,spi-nor";
> spi-max-frequency = <20000000>;
> reg = <1>;
> diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> index 4fa2fac..828a9a5 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
> @@ -200,8 +200,6 @@
> status = "disabled"; /* pin conflict with WEIM NOR */
>
> flash: m25p80 at 0 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> compatible = "st,m25p32", "jedec,spi-nor";
> spi-max-frequency = <20000000>;
> reg = <0>;
> diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> index 0a50705..acb0292 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
> @@ -196,8 +196,6 @@
> status = "okay";
>
> flash: m25p80 at 0 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> compatible = "st,m25p32", "jedec,spi-nor";
> spi-max-frequency = <20000000>;
> reg = <0>;
> diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
> index 60600b4..03a2240 100644
> --- a/arch/arm/boot/dts/imx6sl-evk.dts
> +++ b/arch/arm/boot/dts/imx6sl-evk.dts
> @@ -123,8 +123,6 @@
> status = "okay";
>
> flash: m25p80 at 0 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> compatible = "st,m25p32", "jedec,spi-nor";
> spi-max-frequency = <20000000>;
> reg = <0>;
> diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
> index e3533e7..ebbed57 100644
> --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
> +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
> @@ -127,16 +127,12 @@
>
> flash0: s25fl128s at 0 {
> reg = <0>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> compatible = "spansion,s25fl128s", "jedec,spi-nor";
> spi-max-frequency = <66000000>;
> };
>
> flash1: s25fl128s at 1 {
> reg = <1>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> compatible = "spansion,s25fl128s", "jedec,spi-nor";
> spi-max-frequency = <66000000>;
> };
> diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
> index 6dd9beb..4b7481a 100644
> --- a/arch/arm/boot/dts/imx6sx-sdb.dts
> +++ b/arch/arm/boot/dts/imx6sx-sdb.dts
> @@ -113,16 +113,12 @@
> status = "okay";
>
> flash0: n25q256a at 0 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> compatible = "micron,n25q256a", "jedec,spi-nor";
> spi-max-frequency = <29000000>;
> reg = <0>;
> };
>
> flash1: n25q256a at 1 {
> - #address-cells = <1>;
> - #size-cells = <1>;
> compatible = "micron,n25q256a", "jedec,spi-nor";
> spi-max-frequency = <29000000>;
> reg = <1>;
>
More information about the linux-arm-kernel
mailing list