[PATCH] ARM: dts: imx6: Remove unneeded address-cells/size-cells
Fabio Estevam
festevam at gmail.com
Fri Nov 10 13:12:58 PST 2017
From: Fabio Estevam <fabio.estevam at nxp.com>
According to Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt:
"- #address-cells, #size-cells : Must be present if the device has
sub-nodes representing partitions."
Remove the occurrences of #address-cells/size-cells where no sub-nodes
representing partitions are present.
Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
---
arch/arm/boot/dts/imx6q-cm-fx6.dts | 2 --
arch/arm/boot/dts/imx6q-mccmon6.dts | 2 --
arch/arm/boot/dts/imx6qdl-aristainetos.dtsi | 2 --
arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi | 2 --
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 2 --
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 2 --
arch/arm/boot/dts/imx6sl-evk.dts | 2 --
arch/arm/boot/dts/imx6sx-sdb-reva.dts | 4 ----
arch/arm/boot/dts/imx6sx-sdb.dts | 4 ----
9 files changed, 22 deletions(-)
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
index bc7587c..5df84e2 100644
--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -194,8 +194,6 @@
status = "okay";
m25p80 at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "st,m25p", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts
index cab36f4..9636e15 100644
--- a/arch/arm/boot/dts/imx6q-mccmon6.dts
+++ b/arch/arm/boot/dts/imx6q-mccmon6.dts
@@ -90,8 +90,6 @@
status = "okay";
s25sl032p: flash at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <40000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
index 7d64075..d8f578c 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
@@ -106,8 +106,6 @@
status = "okay";
flash: m25p80 at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "micron,n25q128a11", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
index 1b18728..5875252 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -136,8 +136,6 @@
status = "okay";
flash: m25p80 at 1 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "micron,n25q128a11", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <1>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 4fa2fac..828a9a5 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -200,8 +200,6 @@
status = "disabled"; /* pin conflict with WEIM NOR */
flash: m25p80 at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "st,m25p32", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 0a50705..acb0292 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -196,8 +196,6 @@
status = "okay";
flash: m25p80 at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "st,m25p32", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 60600b4..03a2240 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -123,8 +123,6 @@
status = "okay";
flash: m25p80 at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "st,m25p32", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index e3533e7..ebbed57 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -127,16 +127,12 @@
flash0: s25fl128s at 0 {
reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "spansion,s25fl128s", "jedec,spi-nor";
spi-max-frequency = <66000000>;
};
flash1: s25fl128s at 1 {
reg = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "spansion,s25fl128s", "jedec,spi-nor";
spi-max-frequency = <66000000>;
};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index 6dd9beb..4b7481a 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -113,16 +113,12 @@
status = "okay";
flash0: n25q256a at 0 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
reg = <0>;
};
flash1: n25q256a at 1 {
- #address-cells = <1>;
- #size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
reg = <1>;
--
2.7.4
More information about the linux-arm-kernel
mailing list