[PATCH] pinctrl: use non-devm kmalloc versions for free functions

[Linus Walleij]

On Thu, May 11, 2017 at 4:20 PM, Andre Przywara <andre.przywara at arm.com> wrote:
>> On Thu, May 4, 2017 at 1:57 AM, Andre Przywara <andre.przywara at arm.com> wrote:
>>
>>> When a pinctrl driver gets interrupted during its probe process
>>> (returning -EPROBE_DEFER), the devres system cleans up all allocated
>>> resources. During this process it calls pinmux_generic_free_functions()
>>> and pinctrl_generic_free_groups(), which in turn use managed kmalloc
>>> calls for temporarily allocating some memory. Now those calls seem to
>>> get added to the devres list, but are apparently not covered by the
>>> cleanup process, because this is actually just running and iterating the
>>> existing list. This leads to those mallocs being left with the device,
>>> which the devres manager complains about when the driver eventually gets
>>> probed again:
>>> [    0.825239] ------------[ cut here ]------------
>>> [    0.825256] WARNING: CPU: 1 PID: 89 at drivers/base/dd.c:349 driver_probe_device+0x2ac/0x2e8
>>> [    0.825258] Modules linked in:
>>> [    0.825262]
>>> [    0.825270] CPU: 1 PID: 89 Comm: kworker/1:1 Not tainted 4.11.0 #307
>>> [    0.825272] Hardware name: Pine64+ (DT)
>>> [    0.825283] Workqueue: events deferred_probe_work_func
>>> [    0.825288] task: ffff80007c19c100 task.stack: ffff80007c16c000
>>> [    0.825292] PC is at driver_probe_device+0x2ac/0x2e8
>>> [    0.825296] LR is at driver_probe_device+0x108/0x2e8
>>> [    0.825300] pc : [<ffff000008559234>] lr : [<ffff000008559090>] pstate: 20000045
>>> ....
>>> This warning is triggered because the devres list is not empty. In this
>>> case the allocations were using 0 bytes, so no real leaks, but still this
>>> ugly warning.
>>> Looking more closely at these *cleanup* functions, devm_kzalloc() is actually
>>> not needed, because the memory is just allocated temporarily and can be
>>> freed just before returning from this function.
>>> So fix this issue by using the bog standard kcalloc() call instead of
>>> devm_kzalloc() and kfree()ing the memory at the end.
>>>
>>> This fixes above warnings on boot, which can be observed on *some* builds
>>> for the Pine64, where the pinctrl driver gets loaded early, but it missing
>>> resources, so gets deferred and is loaded again (successfully) later.
>>> kernelci caught this as well [1].
>>>
>>> Signed-off-by: Andre Przywara <andre.przywara at arm.com>
>>>
>>> [1] https://storage.kernelci.org/net-next/master/v4.11-rc8-2122-gc08bac03d289/arm64/defconfig/lab-baylibre-seattle/boot-sun50i-a64-pine64-plus.html
>>> ---
>>> Hi,
>>>
>>> not sure this is the right fix, I am open to suggestions.
>>
>> I have queued this as a tentative v4.12-rc1 fix, but a bit undertain.
>>
>> Tejun, do I read your comments on the patch as an ACK?
>
> Tejun and I were wondering why we need this "create an array with the
> indices" in the first place. If we can just call radix_tree_delete()
> directly from the radix_tree_for_each_slot() loop, we can have a much
> better fix (omitting the memory allocation at all)

OK I pulled the patch out again for now.

> Linus, can you shed some light if this array creation serves some purpose?

Tony [author of this function] can you look at this?

The code in pinctrl_generic_free_groups() does look a bit weird,
allocating these indices just to remove the radix tree.
Do you think we can clean it up?

Yours,
Linus Walleij