[PATCH/RFT 0/2] ARM: dts: gose: Enable UHS-I SDR-50 and SDR-104
Simon Horman
horms at verge.net.au
Thu May 11 08:48:31 PDT 2017
On Tue, Apr 18, 2017 at 02:55:37PM +0900, Simon Horman wrote:
> Enable
> - SDR-50 and SDR-104 for SDHI0 and;
> - SDR-50 for SDHI1
>
> Verified:
> - SDR104 for SDHI0
> - SDR50 for SDHI1
> - Results comprable to those listed for other Renesas R-Car Gen2 boards on
> http://elinux.org/Tests:SD-SDHI-SDR104
> Untested:
> SDR50 for SDHI3
> - HS C4 card present in slot on board which I access remotely
The above should read SDHI2 rather than SDHI3.
I have now been able to test SDHI2 and have queued up this series
with Wolfram's Acks.
> Simon Horman (2):
> ARM: dts: r8a7793: set maximum frequency for SDHI clocks
> ARM: dts: gose: Enable UHS-I SDR-50 and SDR-104
>
> arch/arm/boot/dts/r8a7793-gose.dts | 34 +++++++++++++++++++++++++++++++---
> arch/arm/boot/dts/r8a7793.dtsi | 3 +++
> 2 files changed, 34 insertions(+), 3 deletions(-)
>
> --
> 2.7.0.rc3.207.g0ac5344
>
More information about the linux-arm-kernel
mailing list