[PATCH 3/5] ARM: dts: am4372: Update operating-points-v2 table for cpu
Lukasz Majewski
lukma at denx.de
Mon Mar 6 08:03:58 PST 2017
On Mon, 6 Mar 2017 09:23:40 -0600
Dave Gerlach <d-gerlach at ti.com> wrote:
> The operatings-points-v2 table for am4372 was merged before any user
> of it was present in the kernel and before the binding had been
> finalized. The new ti-cpufreq driver and binding expects the platform
> specific properties to be part of the operating-points-v2 table
> rather than the cpu node so let's move them there as the only user is
> the ti-cpufreq driver.
>
> Signed-off-by: Dave Gerlach <d-gerlach at ti.com>
Reviewed-by: Lukasz Majewski <lukma at denx.de>
> ---
> arch/arm/boot/dts/am4372.dtsi | 7 +++----
> 1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am4372.dtsi
> b/arch/arm/boot/dts/am4372.dtsi index 97fcaf415de1..176e09e9a45e
> 100644 --- a/arch/arm/boot/dts/am4372.dtsi
> +++ b/arch/arm/boot/dts/am4372.dtsi
> @@ -50,15 +50,14 @@
> clock-names = "cpu";
>
> operating-points-v2 = <&cpu0_opp_table>;
> - ti,syscon-efuse = <&scm_conf 0x610 0x3f 0>;
> - ti,syscon-rev = <&scm_conf 0x600>;
>
> clock-latency = <300000>; /* From
> omap-cpufreq driver */ };
> };
>
> - cpu0_opp_table: opp_table0 {
> - compatible = "operating-points-v2";
> + cpu0_opp_table: opp-table {
> + compatible = "operating-points-v2-ti-cpu";
> + syscon = <&scm_conf>;
>
> opp50 at 300000000 {
> opp-hz = /bits/ 64 <300000000>;
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
More information about the linux-arm-kernel
mailing list