[PATCH 3/5] ARM: dts: am4372: Update operating-points-v2 table for cpu

[Dave Gerlach]

The operatings-points-v2 table for am4372 was merged before any user of
it was present in the kernel and before the binding had been finalized.
The new ti-cpufreq driver and binding expects the platform specific
properties to be part of the operating-points-v2 table rather than the
cpu node so let's move them there as the only user is the ti-cpufreq
driver.

Signed-off-by: Dave Gerlach <d-gerlach at ti.com>
---
 arch/arm/boot/dts/am4372.dtsi | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 97fcaf415de1..176e09e9a45e 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -50,15 +50,14 @@
 			clock-names = "cpu";
 
 			operating-points-v2 = <&cpu0_opp_table>;
-			ti,syscon-efuse = <&scm_conf 0x610 0x3f 0>;
-			ti,syscon-rev = <&scm_conf 0x600>;
 
 			clock-latency = <300000>; /* From omap-cpufreq driver */
 		};
 	};
 
-	cpu0_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		syscon = <&scm_conf>;
 
 		opp50 at 300000000 {
 			opp-hz = /bits/ 64 <300000000>;
-- 
2.11.0