[PATCH] dts: ipq4019: Move xo and timer nodes to SoC dtsi
Stephen Boyd
sboyd at codeaurora.org
Fri Jun 30 10:17:50 PDT 2017
On 06/30, Varadarajan Narayanan wrote:
> diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
> index b9457dd..b74c113 100644
> --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
> @@ -20,26 +20,7 @@
> model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
> compatible = "qcom,ipq4019";
>
> - clocks {
> - xo: xo {
> - compatible = "fixed-clock";
> - clock-frequency = <48000000>;
> - #clock-cells = <0>;
> - };
> - };
> -
> soc {
> -
> -
> - timer {
> - compatible = "arm,armv7-timer";
> - interrupts = <1 2 0xf08>,
> - <1 3 0xf08>,
> - <1 4 0xf08>,
> - <1 1 0xf08>;
> - clock-frequency = <48000000>;
> - };
> -
> pinctrl at 0x01000000 {
This should be pinctrl at 1000000 { and fixed in another patch.
> serial_pins: serial_pinmux {
> mux {
> diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> index b7a24af..e8ab1e1 100644
> --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> @@ -96,6 +96,11 @@
> clock-frequency = <32768>;
> #clock-cells = <0>;
> };
> + xo: xo {
Please add a newline so it isn't right next to the previous node.
> + compatible = "fixed-clock";
> + clock-frequency = <48000000>;
> + #clock-cells = <0>;
> + };
> };
>
> soc {
> @@ -104,6 +109,15 @@
> ranges;
> compatible = "simple-bus";
>
> + timer {
> + compatible = "arm,armv7-timer";
> + interrupts = <1 2 0xf08>,
> + <1 3 0xf08>,
> + <1 4 0xf08>,
> + <1 1 0xf08>;
> + clock-frequency = <48000000>;
> + };
This should be outside of the soc node.
> +
> intc: interrupt-controller at b000000 {
> compatible = "qcom,msm-qgic2";
> interrupt-controller;
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
More information about the linux-arm-kernel
mailing list