[PATCH] dts: ipq4019: Move xo and timer nodes to SoC dtsi
Varadarajan Narayanan
varada at codeaurora.org
Fri Jun 30 03:08:01 PDT 2017
The node for xo and timer belong to the SoC DTS file.
Else, new board DT files may not inherit these nodes.
Signed-off-by: Varadarajan Narayanan <varada at codeaurora.org>
---
arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 19 -------------------
arch/arm/boot/dts/qcom-ipq4019.dtsi | 14 ++++++++++++++
2 files changed, 14 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
index b9457dd..b74c113 100644
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
@@ -20,26 +20,7 @@
model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
compatible = "qcom,ipq4019";
- clocks {
- xo: xo {
- compatible = "fixed-clock";
- clock-frequency = <48000000>;
- #clock-cells = <0>;
- };
- };
-
soc {
-
-
- timer {
- compatible = "arm,armv7-timer";
- interrupts = <1 2 0xf08>,
- <1 3 0xf08>,
- <1 4 0xf08>,
- <1 1 0xf08>;
- clock-frequency = <48000000>;
- };
-
pinctrl at 0x01000000 {
serial_pins: serial_pinmux {
mux {
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index b7a24af..e8ab1e1 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -96,6 +96,11 @@
clock-frequency = <32768>;
#clock-cells = <0>;
};
+ xo: xo {
+ compatible = "fixed-clock";
+ clock-frequency = <48000000>;
+ #clock-cells = <0>;
+ };
};
soc {
@@ -104,6 +109,15 @@
ranges;
compatible = "simple-bus";
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 2 0xf08>,
+ <1 3 0xf08>,
+ <1 4 0xf08>,
+ <1 1 0xf08>;
+ clock-frequency = <48000000>;
+ };
+
intc: interrupt-controller at b000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
More information about the linux-arm-kernel
mailing list