[PATCH v4 11/28] ARM: dts: Add Actions Semi S500 and LeMaker Guitar

[Andreas Färber]

Am 06.06.2017 um 02:54 schrieb Andreas Färber:
> Signed-off-by: Andreas Färber <afaerber at suse.de>
> ---
>  v3 -> v4:
>  * Adopted lower-case timer interrupt-names (Mark)
>  
>  v2 -> v3:
>  * Fixed uart2 reg offset
>  * Enlarged timer reg size
>  * Added 2 Hz timer interrupts, interrupt-names
>  * Disabled CPUs 1-3 for now (cf. later patches)
>  * Added Cortex-A9 SCU, global timer, TWD timer/wdt nodes
>  * Added HOSC clock for timer
>  
>  v1 -> v2:
>  * Reworded subject
>  * Updated ARCH_OWL to ARCH_ACTIONS (Arnd)
>  * Adopted "actions" vendor prefix
>  * Dropped irq.h include
>  * Added memory at 0 node for Guitar SoM
>  * Dropped bogus uart3 clock-frequency
>  * Added device_type for CPU nodes
>  * Fixed UART reg size
>  * Adopted SPDX-License-Identifier (Rob)
>  * Added remaining UART nodes
>  * Added timer node
>  
>  arch/arm/boot/dts/Makefile                 |   2 +
>  arch/arm/boot/dts/s500-guitar-bb-rev-b.dts |  26 +++++
>  arch/arm/boot/dts/s500-guitar.dtsi         |  22 ++++
>  arch/arm/boot/dts/s500.dtsi                | 176 +++++++++++++++++++++++++++++
>  4 files changed, 226 insertions(+)
>  create mode 100644 arch/arm/boot/dts/s500-guitar-bb-rev-b.dts
>  create mode 100644 arch/arm/boot/dts/s500-guitar.dtsi
>  create mode 100644 arch/arm/boot/dts/s500.dtsi

Following a previous discussion with Thomas (that Actions unfortunately
didn't follow-up to with replies here...), I am planning to respin with
s500*.dts[i] renamed to owl-s500*. That will avoid name clashes and will
future-proof the file pattern in MAINTAINERS.

For S900 I don't think we need owl-, as we have actions/* there.

Regards,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)