[PATCH v4 11/28] ARM: dts: Add Actions Semi S500 and LeMaker Guitar
Andreas Färber
afaerber at suse.de
Mon Jun 5 17:54:09 PDT 2017
Signed-off-by: Andreas Färber <afaerber at suse.de>
---
v3 -> v4:
* Adopted lower-case timer interrupt-names (Mark)
v2 -> v3:
* Fixed uart2 reg offset
* Enlarged timer reg size
* Added 2 Hz timer interrupts, interrupt-names
* Disabled CPUs 1-3 for now (cf. later patches)
* Added Cortex-A9 SCU, global timer, TWD timer/wdt nodes
* Added HOSC clock for timer
v1 -> v2:
* Reworded subject
* Updated ARCH_OWL to ARCH_ACTIONS (Arnd)
* Adopted "actions" vendor prefix
* Dropped irq.h include
* Added memory at 0 node for Guitar SoM
* Dropped bogus uart3 clock-frequency
* Added device_type for CPU nodes
* Fixed UART reg size
* Adopted SPDX-License-Identifier (Rob)
* Added remaining UART nodes
* Added timer node
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/s500-guitar-bb-rev-b.dts | 26 +++++
arch/arm/boot/dts/s500-guitar.dtsi | 22 ++++
arch/arm/boot/dts/s500.dtsi | 176 +++++++++++++++++++++++++++++
4 files changed, 226 insertions(+)
create mode 100644 arch/arm/boot/dts/s500-guitar-bb-rev-b.dts
create mode 100644 arch/arm/boot/dts/s500-guitar.dtsi
create mode 100644 arch/arm/boot/dts/s500.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 3d6e288a49f7..e1ce692f9190 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -668,6 +668,8 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
orion5x-maxtor-shared-storage-2.dtb \
orion5x-netgear-wnr854t.dtb \
orion5x-rd88f5182-nas.dtb
+dtb-$(CONFIG_ARCH_ACTIONS) += \
+ s500-guitar-bb-rev-b.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += \
prima2-evb.dtb
dtb-$(CONFIG_ARCH_OXNAS) += \
diff --git a/arch/arm/boot/dts/s500-guitar-bb-rev-b.dts b/arch/arm/boot/dts/s500-guitar-bb-rev-b.dts
new file mode 100644
index 000000000000..834b71df31bd
--- /dev/null
+++ b/arch/arm/boot/dts/s500-guitar-bb-rev-b.dts
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2016-2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "s500-guitar.dtsi"
+
+/ {
+ compatible = "lemaker,guitar-bb-rev-b", "lemaker,guitar", "actions,s500";
+ model = "LeMaker Guitar Base Board rev. B";
+
+ aliases {
+ serial3 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial3:115200n8";
+ };
+};
+
+&uart3 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/s500-guitar.dtsi b/arch/arm/boot/dts/s500-guitar.dtsi
new file mode 100644
index 000000000000..063ada966c94
--- /dev/null
+++ b/arch/arm/boot/dts/s500-guitar.dtsi
@@ -0,0 +1,22 @@
+/*
+ * LeMaker Guitar SoM
+ *
+ * Copyright (c) 2016-2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include "s500.dtsi"
+
+/ {
+ compatible = "lemaker,guitar", "actions,s500";
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x40000000>;
+ };
+};
+
+&timer {
+ clocks = <&hosc>;
+};
diff --git a/arch/arm/boot/dts/s500.dtsi b/arch/arm/boot/dts/s500.dtsi
new file mode 100644
index 000000000000..fc9f71a4106a
--- /dev/null
+++ b/arch/arm/boot/dts/s500.dtsi
@@ -0,0 +1,176 @@
+/*
+ * Actions Semi S500 SoC
+ *
+ * Copyright (c) 2016-2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "actions,s500";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ };
+
+ chosen {
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x0>;
+ };
+
+ cpu1: cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x1>;
+ };
+
+ cpu2: cpu at 2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x2>;
+ };
+
+ cpu3: cpu at 3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x3>;
+ };
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ hosc: hosc {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ scu: scu at b0020000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0xb0020000 0x100>;
+ };
+
+ global_timer: timer at b0020200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0xb0020200 0x100>;
+ interrupts = <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+ status = "disabled";
+ };
+
+ twd_timer: timer at b0020600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xb0020600 0x20>;
+ interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+ status = "disabled";
+ };
+
+ twd_wdt: wdt at b0020620 {
+ compatible = "arm,cortex-a9-twd-wdt";
+ reg = <0xb0020620 0xe0>;
+ interrupts = <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller at b0021000 {
+ compatible = "arm,cortex-a9-gic";
+ reg = <0xb0021000 0x1000>,
+ <0xb0020100 0x0100>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ l2: cache-controller at b0022000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xb0022000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+ arm,tag-latency = <3 3 2>;
+ arm,data-latency = <5 3 3>;
+ };
+
+ uart0: serial at b0120000 {
+ compatible = "actions,s500-uart", "actions,owl-uart";
+ reg = <0xb0120000 0x2000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart1: serial at b0122000 {
+ compatible = "actions,s500-uart", "actions,owl-uart";
+ reg = <0xb0122000 0x2000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart2: serial at b0124000 {
+ compatible = "actions,s500-uart", "actions,owl-uart";
+ reg = <0xb0124000 0x2000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart3: serial at b0126000 {
+ compatible = "actions,s500-uart", "actions,owl-uart";
+ reg = <0xb0126000 0x2000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart4: serial at b0128000 {
+ compatible = "actions,s500-uart", "actions,owl-uart";
+ reg = <0xb0128000 0x2000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart5: serial at b012a000 {
+ compatible = "actions,s500-uart", "actions,owl-uart";
+ reg = <0xb012a000 0x2000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart6: serial at b012c000 {
+ compatible = "actions,s500-uart", "actions,owl-uart";
+ reg = <0xb012c000 0x2000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer: timer at b0168000 {
+ compatible = "actions,s500-timer";
+ reg = <0xb0168000 0x8000>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "2hz0", "2hz1", "timer0", "timer1";
+ };
+ };
+};
--
2.12.3
More information about the linux-arm-kernel
mailing list