[PATCH] ARM: dts: exynos: Add the OF graph between fimd and dsi
Hoegeun Kwon
hoegeun.kwon at samsung.com
Fri Jun 9 01:26:32 PDT 2017
On 06/09/2017 04:27 PM, Krzysztof Kozlowski wrote:
> On Fri, Jun 09, 2017 at 11:59:33AM +0900, Hoegeun Kwon wrote:
>> It should be connected to OF graph between fimd and dsi.
>> Add the OF graph between fimd and dsi.
> I need more explanation why this is needed. What happens without this?
> What issue is fixed here?
>
> What about Exynos5250 and Exynos5420? I think we do not have a board in
> mainline using FIMD but maybe this should be added just for correct
> hardware description?
Thank you for your review.
I'm sorry, this patch is wrong.
Please ignore this patch. :)
Best regards,
Hoegeun
>
>
> Best regards,
> Krzysztof
>
>> Signed-off-by: Hoegeun Kwon <hoegeun.kwon at samsung.com>
>> ---
>> arch/arm/boot/dts/exynos3250.dtsi | 26 ++++++++++++++++++++++++++
>> arch/arm/boot/dts/exynos4.dtsi | 26 ++++++++++++++++++++++++++
>> 2 files changed, 52 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
>> index 590ee44..22d523f 100644
>> --- a/arch/arm/boot/dts/exynos3250.dtsi
>> +++ b/arch/arm/boot/dts/exynos3250.dtsi
>> @@ -311,6 +311,19 @@
>> iommus = <&sysmmu_fimd0>;
>> samsung,sysreg = <&sys_reg>;
>> status = "disabled";
>> +
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port at 0 {
>> + reg = <0>;
>> + fimd_to_dsi: endpoint {
>> + remote-endpoint =
>> + <&dsi_to_fimd>;
>> + };
>> + };
>> + };
>> };
>>
>> dsi_0: dsi at 11C80000 {
>> @@ -326,6 +339,19 @@
>> #address-cells = <1>;
>> #size-cells = <0>;
>> status = "disabled";
>> +
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port at 0 {
>> + reg = <0>;
>> + dsi_to_fimd: endpoint {
>> + remote-endpoint =
>> + <&fimd_to_dsi>;
>> + };
>> + };
>> + };
>> };
>>
>> sysmmu_fimd0: sysmmu at 11E20000 {
>> diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
>> index 497a947..773d392 100644
>> --- a/arch/arm/boot/dts/exynos4.dtsi
>> +++ b/arch/arm/boot/dts/exynos4.dtsi
>> @@ -193,6 +193,19 @@
>> status = "disabled";
>> #address-cells = <1>;
>> #size-cells = <0>;
>> +
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port at 0 {
>> + reg = <0>;
>> + dsi_to_fimd: endpoint {
>> + remote-endpoint =
>> + <&fimd_to_dsi>;
>> + };
>> + };
>> + };
>> };
>>
>> camera {
>> @@ -715,6 +728,19 @@
>> iommus = <&sysmmu_fimd0>;
>> samsung,sysreg = <&sys_reg>;
>> status = "disabled";
>> +
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port at 0 {
>> + reg = <0>;
>> + fimd_to_dsi: endpoint {
>> + remote-endpoint =
>> + <&dsi_to_fimd>;
>> + };
>> + };
>> + };
>> };
>>
>> tmu: tmu at 100C0000 {
>> --
>> 1.9.1
>>
>
>
More information about the linux-arm-kernel
mailing list