[PATCH v3 0/3] Add support for the S6E3HF2 panel on TM2e board

[Hoegeun Kwon]

Dear Thierry,

Could you check these patches.

Regards,
Hoegeun

On 05/19/2017 03:56 PM, Hoegeun Kwon wrote:
> Dear Thierry,
>
> Could you check these patches?
> I think this patches have accumulated enough dust.
> If you have a another opinion, please tell me.
>
> Best regards,
> Hoegeun
>
> On 04/18/2017 05:40 PM, Hoegeun Kwon wrote:
>> Hi all,
>>
>> The purpose of this patch is add support for s6e3hf2 AMOLED panel on
>> the TM2e board. The panel has 1600x2560 resolution in 5.65" physical
>> panel in the TM2e device.
>>
>> The s6e3hf2 panel(5.65") is simliar to the previous s6e3ha2 panel(5.7"),
>> but resolution and some command message are different. So it can be
>> distinguished as a compatiblitiy string.
>>
>> Best regards,
>> Hoegeun
>>
>> Changes for V3:
>> - Remove te-gpios property in dts.
>> - Added Reviewed-by: Andrzej Hajda <a.hajda at samsung.com> on all patches.
>> - Added Reviewed-by: Inki Dae <inki.dae at samsung.com> on patch (2/3).
>>
>> Changes for V2:
>> - Add new compatible string to "samsung,s6e3ha2.txt binding with 
>> comments.
>> - Fix the panel name from s6e3ha2-e to s6e3hf2
>>
>> Hoegeun Kwon (3):
>>    dt-bindings: Add support for samsung s6e3hf2 panel
>>    drm/panel: s6e3ha2: Add support for s6e3hf2 panel on TM2e board
>>    arm64: dts: exynos: Add support for s6e3hf2 panel device on TM2e 
>> board
>>
>>   .../bindings/display/panel/samsung,s6e3ha2.txt     |  5 +-
>>   arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts     | 11 ++++
>>   drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c      | 64 
>> +++++++++++++++++++---
>>   3 files changed, 72 insertions(+), 8 deletions(-)
>>
>
>
>