[PATCH 3/4] arm64: dts: marvell: Enable second SDHCI controller in Armada 37xx

[Gregory CLEMENT]

From: Konstantin Porotchkin <kostap at marvell.com>

The Armada 37xx SOCs has 2 SDHCI interfaces. This patch adds the second
one.

Moroever, the Armada 37xx DB v2 board populates the 2 SDHCI interfaces.

The second interface is using plugable module that can either
have an SD connector or eMMC on it.
This patch adds support for SD module in the device DT.

[ gregory.clement at free-electrons.com:
 - Add more detail in commit log
 - Sort the dt node in address order
 - Document the SD slot in the dts ]

Signed-off-by: Konstantin Porotchkin <kostap at marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement at free-electrons.com>
---
 arch/arm64/boot/dts/marvell/armada-3720-db.dts |  9 +++++++++
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi   | 11 +++++++++++
 2 files changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 3ee920ac0015..eab3bc7e6382 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -158,6 +158,15 @@
 	status = "okay";
 };
 
+/* SD slot module on CON14(V2.0)/CON15(V1.4) */
+&sdhci1 {
+	wp-inverted;
+	cd-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	marvell,pad-type = "sd";
+	status = "okay";
+};
+
 &spi0 {
 	status = "okay";
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 4d495ec39202..01a9c30be38d 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -292,6 +292,17 @@
 				};
 			};
 
+			sdhci1: sdhci at d0000 {
+				compatible = "marvell,armada-3700-sdhci",
+				"marvell,sdhci-xenon";
+				reg = <0xd0000 0x300
+				       0x1e808 0x4>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&nb_periph_clk 0>;
+				clock-names = "core";
+				status = "disabled";
+			};
+
 			sdhci0: sdhci at d8000 {
 				compatible = "marvell,armada-3700-sdhci",
 				"marvell,sdhci-xenon";
-- 
2.11.0