[PATCH v6 00/11] Broadcom Stingray SOC Initial Support

[Anup Patel]

On Tue, Jun 6, 2017 at 7:38 AM, Florian Fainelli <f.fainelli at gmail.com> wrote:
>
>
> On 06/05/2017 09:51 AM, Florian Fainelli wrote:
>> On 06/01/2017 11:34 PM, Anup Patel wrote:
>>> This patchset adds initial support of Broadcom Stingray SOC
>>> by reusing existing Broadcom iProc device drivers.
>>>
>>> Most of the patches in this patchset are DT patches except
>>> the Stingray clock tree support which just one patch.
>>>
>>> This patchset is based on Linux-4.12-rc3 and it is also available
>>> at stingray-v6 branch of https://github.com/Broadcom/arm64-linux.git
>>>
>>> Changes since v5:
>>>  - Rebased patches for Linux-4.12-rc3
>>>  - Update DT node names to match register offset
>>>
>>> Changes since v4:
>>>  - Reduce number of include headers in Stingray clk driver
>>>
>>> Changes since v3:
>>>  - Rebased patches for Linux-4.12-rc1
>>>  - Updated PATCH3 to have all clocks except genpll3 to be
>>>    registered via platform driver probe
>>>
>>> Changes since v2:
>>>  - Remove default bootargs from chosen DT node
>>>  - Remove "linux" prefix from stdout DT attribute of chosen DT node
>>>  - Remove use of GIC_CPU_MASK_xxx() for PPIs
>>>
>>> Changes since v1:
>>>  - Rebased patches for Linux-4.12-rc1
>>>  - Removed unwanted /memreserve/ from bcm958742-base.dtsi
>>>  - Use ranges DT property to clear view of memory-layout
>>>  - Make bcm-sr.h part of clock DT bindings patch
>>>
>>> Anup Patel (3):
>>>   dt-bindings: bcm: Add Broadcom Stingray bindings document
>>>   arm64: dts: Initial DTS files for Broadcom Stingray SOC
>>>   arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray
>>>
>>> Oza Pawandeep (1):
>>>   arm64: dts: Add I2C DT nodes for Stingray SoC
>>>
>>> Pramod Kumar (3):
>>>   arm64: dts: Add NAND DT nodes for Stingray SOC
>>>   arm64: dts: Add pinctrl DT nodes for Stingray SOC
>>>   arm64: dts: Add GPIO DT nodes for Stingray SOC
>>>
>>> Sandeep Tripathy (3):
>>>   dt-bindings: clk: Extend binding doc for Stingray SOC
>>>   clk: bcm: Add clocks for Stingray SOC
>>>   arm64: dts: Add clock DT nodes for Stingray SOC
>>>
>>> Srinath Mannam (1):
>>>   arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC
>>
>> Applied patches 1, 4-11 to devicetree-arm64/next, thanks!
>
> Also took patch 2, to make sure everything builds properly, Stephen, let
> me know if you want me to take patch #3 as well.

Thanks for patches 1-2 and patches 4-11.

Regarding PATCH3, please give us one day. We recently had
minor comments from Stephen which we will address and
send v7 of PATCH3.

Regards,,
Anup