[PATCH v6 00/11] Broadcom Stingray SOC Initial Support

[Florian Fainelli]

On 06/05/2017 09:51 AM, Florian Fainelli wrote:
> On 06/01/2017 11:34 PM, Anup Patel wrote:
>> This patchset adds initial support of Broadcom Stingray SOC
>> by reusing existing Broadcom iProc device drivers.
>>
>> Most of the patches in this patchset are DT patches except
>> the Stingray clock tree support which just one patch.
>>
>> This patchset is based on Linux-4.12-rc3 and it is also available
>> at stingray-v6 branch of https://github.com/Broadcom/arm64-linux.git
>>
>> Changes since v5:
>>  - Rebased patches for Linux-4.12-rc3
>>  - Update DT node names to match register offset
>>
>> Changes since v4:
>>  - Reduce number of include headers in Stingray clk driver
>>
>> Changes since v3:
>>  - Rebased patches for Linux-4.12-rc1
>>  - Updated PATCH3 to have all clocks except genpll3 to be
>>    registered via platform driver probe
>>
>> Changes since v2:
>>  - Remove default bootargs from chosen DT node
>>  - Remove "linux" prefix from stdout DT attribute of chosen DT node
>>  - Remove use of GIC_CPU_MASK_xxx() for PPIs
>>
>> Changes since v1:
>>  - Rebased patches for Linux-4.12-rc1
>>  - Removed unwanted /memreserve/ from bcm958742-base.dtsi
>>  - Use ranges DT property to clear view of memory-layout
>>  - Make bcm-sr.h part of clock DT bindings patch
>>
>> Anup Patel (3):
>>   dt-bindings: bcm: Add Broadcom Stingray bindings document
>>   arm64: dts: Initial DTS files for Broadcom Stingray SOC
>>   arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray
>>
>> Oza Pawandeep (1):
>>   arm64: dts: Add I2C DT nodes for Stingray SoC
>>
>> Pramod Kumar (3):
>>   arm64: dts: Add NAND DT nodes for Stingray SOC
>>   arm64: dts: Add pinctrl DT nodes for Stingray SOC
>>   arm64: dts: Add GPIO DT nodes for Stingray SOC
>>
>> Sandeep Tripathy (3):
>>   dt-bindings: clk: Extend binding doc for Stingray SOC
>>   clk: bcm: Add clocks for Stingray SOC
>>   arm64: dts: Add clock DT nodes for Stingray SOC
>>
>> Srinath Mannam (1):
>>   arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC
> 
> Applied patches 1, 4-11 to devicetree-arm64/next, thanks!

Also took patch 2, to make sure everything builds properly, Stephen, let
me know if you want me to take patch #3 as well.

Thanks!
-- 
Florian