[PATCH v1 3/3] drm/panel: Add support for otm8009a panel driver
Philippe CORNU
philippe.cornu at st.com
Tue Jul 4 09:30:05 PDT 2017
This patch adds Orise Tech otm8009a 3.97" 480x800 TFT LCD
panel driver (MIPI-DSI video mode). The panel backlight is
managed through the DSI link. This panel driver is used in
several STM32 boards.
Signed-off-by: Philippe CORNU <philippe.cornu at st.com>
---
drivers/gpu/drm/panel/Kconfig | 9 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 517 +++++++++++++++++++++++
3 files changed, 527 insertions(+)
create mode 100755 drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index d84a031..c1c9291 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -117,4 +117,13 @@ config DRM_PANEL_SITRONIX_ST7789V
Say Y here if you want to enable support for the Sitronix
ST7789V controller for 240x320 LCD panels
+config DRM_PANEL_ORISETECH_OTM8009A
+ tristate "Orise Tech otm8009a 480p dsi 2dl video mode panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for Orise Tech OTM8009A
+ 480x800 DSI panel
+
endmenu
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 9f6610d..ac798f3 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -10,3 +10,4 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o
obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
+obj-$(CONFIG_DRM_PANEL_ORISETECH_OTM8009A) += panel-orisetech-otm8009a.o
\ No newline at end of file
diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
new file mode 100755
index 0000000..7aefc09
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
@@ -0,0 +1,517 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2017
+ *
+ * Authors: Philippe Cornu <philippe.cornu at st.com>
+ * Yannick Fertre <yannick.fertre at st.com>
+ *
+ * License terms: GNU General Public License (GPL), version 2
+ */
+#include <drm/drmP.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+#include <linux/backlight.h>
+#include <linux/gpio/consumer.h>
+#include <video/mipi_display.h>
+
+#define DRV_NAME "orisetech_otm8009a"
+
+#define OTM8009A_BACKLIGHT_DEFAULT 240
+#define OTM8009A_BACKLIGHT_MAX 255
+
+struct otm8009a {
+ struct device *dev;
+ struct drm_panel panel;
+ struct backlight_device *bl_dev;
+ struct gpio_desc *reset_gpio;
+ bool prepared;
+ bool enabled;
+};
+
+static const struct drm_display_mode default_mode = {
+ .clock = 32729,
+ .hdisplay = 480,
+ .hsync_start = 480 + 120,
+ .hsync_end = 480 + 120 + 63,
+ .htotal = 480 + 120 + 63 + 120,
+ .vdisplay = 800,
+ .vsync_start = 800 + 12,
+ .vsync_end = 800 + 12 + 12,
+ .vtotal = 800 + 12 + 12 + 12,
+ .vrefresh = 50,
+ .flags = 0,
+ .width_mm = 52,
+ .height_mm = 86,
+};
+
+static inline struct otm8009a *panel_to_otm8009a(struct drm_panel *panel)
+{
+ return container_of(panel, struct otm8009a, panel);
+}
+
+static void otm8009a_dcs_write_buf(struct otm8009a *ctx, const void *data,
+ size_t len)
+{
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+ if (mipi_dsi_dcs_write_buffer(dsi, data, len) < 0)
+ DRM_WARN("mipi dsi dcs write buffer failed");
+}
+
+#define dcs_write_seq(seq...) \
+ do { \
+ static const u8 d[] = { seq }; \
+ otm8009a_dcs_write_buf(ctx, d, ARRAY_SIZE(d)); \
+ } while (0)
+
+static int otm8009a_init_sequence(struct otm8009a *ctx)
+{
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+ int ret;
+
+ /*
+ * CMD2_ENA1: Enter in Command 2 mode, enable write function of
+ * Command 2 & enable parameter shift function.
+ * The 3 following sequences allow to enable ORISE command mode.
+ */
+ dcs_write_seq(0xFF, 0x80, 0x09, 0x01);
+ dcs_write_seq(0x00, 0x80);
+ dcs_write_seq(0xFF, 0x80, 0x09);
+
+ /*
+ * Starting from here, address shift needs to be set before sending
+ * a new command. You can find an example in the next sequence...
+ * SD_PCH_CTRL (0xC480) Source Driver Precharge Control (SD_PT=GND)
+ */
+ dcs_write_seq(0x00, 0x80); /* address shift set to 0x80 */
+ dcs_write_seq(0xC4, 0x30); /* 0xC480 parameter 1 is 0x30 */
+ mdelay(10);
+
+ /* Not documented (0xC48A) */
+ dcs_write_seq(0x00, 0x8A);
+ dcs_write_seq(0xC4, 0x40);
+ mdelay(10);
+
+ /* PWR_CTRL4 (0xC5B0) Power Control Setting 4 for DC Voltage */
+ dcs_write_seq(0x00, 0xB1); /* 178th parameter */
+ dcs_write_seq(0xC5, 0xA9);
+
+ /* PWR_CTRL2 (0xC590) Power Control Setting 2 for Normal Mode */
+ dcs_write_seq(0x00, 0x91); /* 146th parameter */
+ dcs_write_seq(0xC5, 0x34);
+
+ /* P_DRV_M (0xC0B4) Panel Driving Mode */
+ dcs_write_seq(0x00, 0xB4);
+ dcs_write_seq(0xC0, 0x50);
+
+ /* VCOMDC (0xD900) VCOM Voltage Setting */
+ dcs_write_seq(0x00, 0x00);
+ dcs_write_seq(0xD9, 0x4E);
+
+ /* OSC_ADJ (0xC181) Oscillator Adjustment for Idle/Normal mode */
+ dcs_write_seq(0x00, 0x81);
+ dcs_write_seq(0xC1, 0x66); /* 65Hz */
+
+ /* RGB_VIDEO_SET (0xC1A1) RGB Video Mode Setting */
+ dcs_write_seq(0x00, 0xA1);
+ dcs_write_seq(0xC1, 0x08);
+
+ /* PWR_CTRL2 (0xC590) Power Control Setting 2 for Normal Mode */
+ dcs_write_seq(0x00, 0x92); /* 147th parameter */
+ dcs_write_seq(0xC5, 0x01);
+ dcs_write_seq(0x00, 0x95); /* 150th parameter */
+ dcs_write_seq(0xC5, 0x34);
+ dcs_write_seq(0x00, 0x94); /* 149th parameter */
+ dcs_write_seq(0xC5, 0x33);
+
+ /* GVDD/NGVDD (0xD800) */
+ dcs_write_seq(0x00, 0x00);
+ dcs_write_seq(0xD8, 0x79, 0x79);
+
+ /* SD_CTRL (0xC0A2) Source Driver Timing Setting */
+ dcs_write_seq(0x00, 0xA3); /* 164th parameter */
+ dcs_write_seq(0xC0, 0x1B);
+
+ /* PWR_CTRL1 (0xC580) Power Control Setting 1 */
+ dcs_write_seq(0x00, 0x82); /* 131st parameter */
+ dcs_write_seq(0xC5, 0x83);
+
+ /* SD_PCH_CTRL (0xC480) Source Driver Precharge Control */
+ dcs_write_seq(0x00, 0x81); /* 130th parameter */
+ dcs_write_seq(0xC4, 0x83);
+
+ /* RGB_VIDEO_SET (0xC1A1) RGB Video Mode Setting */
+ dcs_write_seq(0x00, 0xA1);
+ dcs_write_seq(0xC1, 0x0E); /* todo previously we wrote 0x08... */
+
+ /* PANSET (0xB3A6) Panel Type Setting */
+ dcs_write_seq(0x00, 0xA6);
+ dcs_write_seq(0xB3, 0x00, 0x01);
+
+ /* GOAVST (0xCE80) GOA VST Setting */
+ dcs_write_seq(0x00, 0x80);
+ dcs_write_seq(0xCE, 0x85, 0x01, 0x00, 0x84, 0x01, 0x00);
+
+ /* GOACLKA1 (0xCEA0) GOA CLKA1 Setting */
+ dcs_write_seq(0x00, 0xA0);
+ dcs_write_seq(0xCE, 0x18, 0x04, 0x03, 0x39, 0x00, 0x00, 0x00, 0x18,
+ 0x03, 0x03, 0x3A, 0x00, 0x00, 0x00);
+
+ /* GOACLKA3 (0xCEB0) GOA CLKA3 Setting */
+ dcs_write_seq(0x00, 0xB0);
+ dcs_write_seq(0xCE, 0x18, 0x02, 0x03, 0x3B, 0x00, 0x00, 0x00, 0x18,
+ 0x01, 0x03, 0x3C, 0x00, 0x00, 0x00);
+
+ /* GOAECLK (0xCFC0) GOA ECLK Setting */
+ dcs_write_seq(0x00, 0xC0);
+ dcs_write_seq(0xCF, 0x01, 0x01, 0x20, 0x20, 0x00, 0x00, 0x01, 0x02,
+ 0x00, 0x00);
+
+ /* Not documented */
+ dcs_write_seq(0x00, 0xD0);
+ dcs_write_seq(0xCF, 0x00);
+
+ /* PANCTRLSET1-8 (0xCB80-0xCBF0) Panel Control Setting 1-8 */
+ dcs_write_seq(0x00, 0x80);
+ dcs_write_seq(0xCB, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00);
+ dcs_write_seq(0x00, 0x90);
+ dcs_write_seq(0xCB, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+ dcs_write_seq(0x00, 0xA0);
+ dcs_write_seq(0xCB, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+ dcs_write_seq(0x00, 0xB0);
+ dcs_write_seq(0xCB, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00);
+ dcs_write_seq(0x00, 0xC0);
+ dcs_write_seq(0xCB, 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+ dcs_write_seq(0x00, 0xD0);
+ dcs_write_seq(0xCB, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x04,
+ 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00);
+ dcs_write_seq(0x00, 0xE0);
+ dcs_write_seq(0xCB, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00);
+ dcs_write_seq(0x00, 0xF0);
+ dcs_write_seq(0xCB, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF);
+
+ /* PANU2D1-3 (0xCC80-0xCCA0) Panel U2D Setting 1-3 */
+ dcs_write_seq(0x00, 0x80);
+ dcs_write_seq(0xCC, 0x00, 0x26, 0x09, 0x0B, 0x01, 0x25, 0x00, 0x00,
+ 0x00, 0x00);
+ dcs_write_seq(0x00, 0x90);
+ dcs_write_seq(0xCC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x26, 0x0A, 0x0C, 0x02);
+ dcs_write_seq(0x00, 0xA0);
+ dcs_write_seq(0xCC, 0x25, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+
+ /* PAND2U1-3 (0xCCB0-0xCCD0) Panel D2U Setting 1-3 */
+ dcs_write_seq(0x00, 0xB0);
+ dcs_write_seq(0xCC, 0x00, 0x25, 0x0C, 0x0A, 0x02, 0x26, 0x00, 0x00,
+ 0x00, 0x00);
+ dcs_write_seq(0x00, 0xC0);
+ dcs_write_seq(0xCC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x25, 0x0B, 0x09, 0x01);
+ dcs_write_seq(0x00, 0xD0);
+ dcs_write_seq(0xCC, 0x26, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+
+ /* PWR_CTRL1 (0xC580) Power Control Setting 1 */
+ dcs_write_seq(0x00, 0x81); /* 130th parameter */
+ dcs_write_seq(0xC5, 0x66);
+
+ /* Not documented */
+ dcs_write_seq(0x00, 0xB6);
+ dcs_write_seq(0xF5, 0x06);
+
+ /* GMCT2.2P (0xE100) Gamma Correction 2.2+ Setting */
+ dcs_write_seq(0x00, 0x00);
+ dcs_write_seq(0xE1, 0x00, 0x09, 0x0F, 0x0E, 0x07, 0x10, 0x0B, 0x0A,
+ 0x04, 0x07, 0x0B, 0x08, 0x0F, 0x10, 0x0A, 0x01);
+
+ /* GMCT2.2N (0xE100) Gamma Correction 2.2- Setting */
+ dcs_write_seq(0x00, 0x00);
+ dcs_write_seq(0xE2, 0x00, 0x09, 0x0F, 0x0E, 0x07, 0x10, 0x0B, 0x0A,
+ 0x04, 0x07, 0x0B, 0x08, 0x0F, 0x10, 0x0A, 0x01);
+
+ /* Exit CMD2 mode */
+ dcs_write_seq(0x00, 0x00);
+ dcs_write_seq(0xFF, 0xFF, 0xFF, 0xFF);
+
+ /* OTM8009a NOP */
+ dcs_write_seq(0x00, 0x00);
+
+ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+ if (ret)
+ return ret;
+
+ /* Wait for sleep out exit */
+ mdelay(120);
+
+ /* Default portrait 480x800 rgb24 */
+ dcs_write_seq(MIPI_DCS_SET_ADDRESS_MODE, 0x00);
+ dcs_write_seq(MIPI_DCS_SET_COLUMN_ADDRESS, 0x00, 0x00, 0x01, 0xDF);
+ dcs_write_seq(MIPI_DCS_SET_PAGE_ADDRESS, 0x00, 0x00, 0x03, 0x1F);
+ dcs_write_seq(MIPI_DCS_SET_PIXEL_FORMAT, 0x77);
+
+ /* Disable CABC feature */
+ dcs_write_seq(0x55, 0x00);
+
+ ret = mipi_dsi_dcs_set_display_on(dsi);
+ if (ret)
+ return ret;
+
+ /* OTM8009a NOP */
+ dcs_write_seq(0x00, 0x00);
+
+ /* Send Command GRAM memory write (no parameters) */
+ dcs_write_seq(MIPI_DCS_WRITE_MEMORY_START);
+
+ return 0;
+}
+
+static int otm8009a_disable(struct drm_panel *panel)
+{
+ struct otm8009a *ctx = panel_to_otm8009a(panel);
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+ int ret;
+
+ if (!ctx->enabled)
+ return 0; /* This is not an issue so we return 0 here */
+
+ /* Power off the backlight. Note: end-user still controls brightness */
+ ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
+ ret = backlight_update_status(ctx->bl_dev);
+ if (ret)
+ return ret;
+
+ ret = mipi_dsi_dcs_set_display_off(dsi);
+ if (ret < 0)
+ return ret;
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+ if (ret < 0)
+ return ret;
+
+ msleep(120);
+
+ ctx->enabled = false;
+
+ return 0;
+}
+
+static int otm8009a_unprepare(struct drm_panel *panel)
+{
+ struct otm8009a *ctx = panel_to_otm8009a(panel);
+
+ if (!ctx->prepared)
+ return 0;
+
+ if (ctx->reset_gpio) {
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ msleep(20);
+ }
+
+ ctx->prepared = false;
+
+ return 0;
+}
+
+static int otm8009a_prepare(struct drm_panel *panel)
+{
+ struct otm8009a *ctx = panel_to_otm8009a(panel);
+ int ret;
+
+ if (ctx->prepared)
+ return 0;
+
+ if (ctx->reset_gpio) {
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ msleep(20);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ msleep(20);
+ }
+
+ ret = otm8009a_init_sequence(ctx);
+ if (ret)
+ return ret;
+
+ ctx->prepared = true;
+
+ /* Power on the backlight. Note: end-user still controls brightness */
+ ctx->bl_dev->props.power = FB_BLANK_UNBLANK;
+ backlight_update_status(ctx->bl_dev);
+
+ return 0;
+}
+
+static int otm8009a_enable(struct drm_panel *panel)
+{
+ struct otm8009a *ctx = panel_to_otm8009a(panel);
+
+ ctx->enabled = true;
+
+ return 0;
+}
+
+static int otm8009a_get_modes(struct drm_panel *panel)
+{
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(panel->drm, &default_mode);
+ if (!mode) {
+ DRM_ERROR("failed to add mode %ux%ux@%u\n",
+ default_mode.hdisplay, default_mode.vdisplay,
+ default_mode.vrefresh);
+ return -ENOMEM;
+ }
+
+ drm_mode_set_name(mode);
+
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+ drm_mode_probed_add(panel->connector, mode);
+
+ panel->connector->display_info.width_mm = mode->width_mm;
+ panel->connector->display_info.height_mm = mode->height_mm;
+
+ return 1;
+}
+
+static const struct drm_panel_funcs otm8009a_drm_funcs = {
+ .disable = otm8009a_disable,
+ .unprepare = otm8009a_unprepare,
+ .prepare = otm8009a_prepare,
+ .enable = otm8009a_enable,
+ .get_modes = otm8009a_get_modes,
+};
+
+/*
+ * DSI-BASED BACKLIGHT
+ */
+
+static int otm8009a_backlight_update_status(struct backlight_device *bd)
+{
+ struct otm8009a *ctx = bl_get_data(bd);
+ u8 data[2];
+
+ if (!ctx->prepared) {
+ DRM_WARN("lcd not ready yet for setting its backlight!\n");
+ return -ENXIO;
+ }
+
+ if (bd->props.power <= FB_BLANK_NORMAL) {
+ /* Power on the backlight with the requested brightness */
+ data[0] = MIPI_DCS_SET_DISPLAY_BRIGHTNESS;
+ data[1] = bd->props.brightness;
+ otm8009a_dcs_write_buf(ctx, data, ARRAY_SIZE(data));
+ /* set Brightness Control & Backlight on */
+ data[1] = 0x24;
+ } else {
+ /* Power off the backlight: set Brightness Control & Bl off */
+ data[1] = 0;
+ }
+
+ /* Update Brightness Control & Backlight */
+ data[0] = MIPI_DCS_WRITE_CONTROL_DISPLAY;
+ otm8009a_dcs_write_buf(ctx, data, ARRAY_SIZE(data));
+
+ return 0;
+}
+
+static const struct backlight_ops otm8009a_backlight_ops = {
+ .update_status = otm8009a_backlight_update_status,
+};
+
+static int otm8009a_probe(struct mipi_dsi_device *dsi)
+{
+ struct device *dev = &dsi->dev;
+ struct otm8009a *ctx;
+ int ret;
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(ctx->reset_gpio)) {
+ dev_err(dev, "cannot get reset-gpio\n");
+ return PTR_ERR(ctx->reset_gpio);
+ }
+
+ mipi_dsi_set_drvdata(dsi, ctx);
+
+ ctx->dev = dev;
+
+ dsi->lanes = 2;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_MODE_LPM;
+
+ drm_panel_init(&ctx->panel);
+ ctx->panel.dev = dev;
+ ctx->panel.funcs = &otm8009a_drm_funcs;
+
+ ctx->bl_dev = backlight_device_register(DRV_NAME "_backlight", dev, ctx,
+ &otm8009a_backlight_ops, NULL);
+ if (IS_ERR(ctx->bl_dev)) {
+ dev_err(dev, "failed to register backlight device\n");
+ return PTR_ERR(ctx->bl_dev);
+ }
+
+ ctx->bl_dev->props.max_brightness = OTM8009A_BACKLIGHT_MAX;
+ ctx->bl_dev->props.brightness = OTM8009A_BACKLIGHT_DEFAULT;
+ ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
+ ctx->bl_dev->props.type = BACKLIGHT_RAW;
+
+ drm_panel_add(&ctx->panel);
+
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0) {
+ dev_err(dev, "mipi_dsi_attach failed. Is host ready?\n");
+ drm_panel_remove(&ctx->panel);
+ backlight_device_unregister(ctx->bl_dev);
+ return ret;
+ }
+
+ DRM_INFO(DRV_NAME "_panel %ux%u@%u %ubpp dsi %udl - ready\n",
+ default_mode.hdisplay, default_mode.vdisplay,
+ default_mode.vrefresh,
+ mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
+
+ return 0;
+}
+
+static int otm8009a_remove(struct mipi_dsi_device *dsi)
+{
+ struct otm8009a *ctx = mipi_dsi_get_drvdata(dsi);
+
+ mipi_dsi_detach(dsi);
+ drm_panel_remove(&ctx->panel);
+
+ backlight_device_unregister(ctx->bl_dev);
+
+ return 0;
+}
+
+static const struct of_device_id orisetech_otm8009a_of_match[] = {
+ { .compatible = "orisetech,otm8009a" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, orisetech_otm8009a_of_match);
+
+static struct mipi_dsi_driver orisetech_otm8009a_driver = {
+ .probe = otm8009a_probe,
+ .remove = otm8009a_remove,
+ .driver = {
+ .name = DRV_NAME "_panel",
+ .of_match_table = orisetech_otm8009a_of_match,
+ },
+};
+module_mipi_dsi_driver(orisetech_otm8009a_driver);
+
+MODULE_AUTHOR("Philippe Cornu <philippe.cornu at st.com>");
+MODULE_AUTHOR("Yannick Fertre <yannick.fertre at st.com>");
+MODULE_DESCRIPTION("DRM driver for Orise Tech OTM8009A MIPI DSI panel");
+MODULE_LICENSE("GPL v2");
--
1.9.1
More information about the linux-arm-kernel
mailing list