[PATCH V7 08/11] drivers: acpi: Handle IOMMU lookup failure with deferred probing or error

[Will Deacon]

On Mon, Jan 30, 2017 at 09:33:50AM -0500, Sinan Kaya wrote:
> On 1/30/2017 9:23 AM, Nate Watterson wrote:
> > On 2017-01-30 08:59, Sinan Kaya wrote:
> >> On 1/30/2017 7:22 AM, Robin Murphy wrote:
> >>> On 29/01/17 17:53, Sinan Kaya wrote:
> >>>> On 1/24/2017 7:37 AM, Lorenzo Pieralisi wrote:
> >>>>> [+hanjun, tomasz, sinan]
> >>>>>
> >>>>> It is quite a key patchset, I would be glad if they can test on their
> >>>>> respective platforms with IORT.
> >>>>>
> >>>>
> >>>> Tested on top of 4.10-rc5.
> >>>>
> >>>> 1.    Platform Hidma device passed dmatest
> >>>> 2.    Seeing some USB stalls on a platform USB device.
> >>>> 3.    PCIe NVME drive probed and worked fine with MSI interrupts after boot.
> >>>> 4.     NVMe driver didn't probe following a hotplug insertion and received an
> >>>> SMMU error event during the insertion.
> >>>
> >>> What was the SMMU error - a translation/permission fault (implying the
> >>> wrong DMA ops) or a bad STE fault (implying we totally failed to tell
> >>> the SMMU about the device at all)?
> >>>
> >>
> >> root at ubuntu:/sys/bus/pci/slots/4# echo 0 > power
> >>
> >> [__204.698522]_iommu:_Removing_device_0003:01:00.0_from_group_0
> >> [  204.708704] pciehp 0003:00:00.0:pcie004: Slot(4): Link Down
> >> [  204.708723] pciehp 0003:00:00.0:pcie004: Slot(4): Link Down event
> >> ignored; already powering off
> >>
> >> root at ubuntu:/sys/bus/pci/slots/4#
> >>
> >> [__254.820440]_iommu:_Adding_device_0003:01:00.0_to_group_8
> >> [  254.820599] nvme nvme0: pci function 0003:01:00.0
> >> [  254.820621] nvme 0003:01:00.0: enabling device (0000 -> 0002)
> >> [  261.948558] arm-smmu-v3 arm-smmu-v3.0.auto: event 0x0a received:
> >> [  261.948561] arm-smmu-v3 arm-smmu-v3.0.auto:  0x000001000000000a
> >> [  261.948563] arm-smmu-v3 arm-smmu-v3.0.auto:  0x0000000000000000
> >> [  261.948564] arm-smmu-v3 arm-smmu-v3.0.auto:  0x0000000000000000
> >> [  261.948566] arm-smmu-v3 arm-smmu-v3.0.auto:  0x0000000000000000
> 
> > Looks like C_BAD_CD. Can you please try with:
> > iommu/arm-smmu-v3: Clear prior settings when updating STEs
> 
> This resolved the issue. Can we pull Nate's patch to 4.10 so that I don't see
> this issue again.

I already sent the pull request to Joerg for 4.11. Do you see this problem
without Sricharan's patches (i.e. vanilla mainline)? If so, we'll need to
send the patch to stable after -rc1.

Will