[PATCH V7 08/11] drivers: acpi: Handle IOMMU lookup failure with deferred probing or error

[Sinan Kaya]

On 1/30/2017 9:23 AM, Nate Watterson wrote:
> On 2017-01-30 08:59, Sinan Kaya wrote:
>> On 1/30/2017 7:22 AM, Robin Murphy wrote:
>>> On 29/01/17 17:53, Sinan Kaya wrote:
>>>> On 1/24/2017 7:37 AM, Lorenzo Pieralisi wrote:
>>>>> [+hanjun, tomasz, sinan]
>>>>>
>>>>> It is quite a key patchset, I would be glad if they can test on their
>>>>> respective platforms with IORT.
>>>>>
>>>>
>>>> Tested on top of 4.10-rc5.
>>>>
>>>> 1.    Platform Hidma device passed dmatest
>>>> 2.    Seeing some USB stalls on a platform USB device.
>>>> 3.    PCIe NVME drive probed and worked fine with MSI interrupts after boot.
>>>> 4.     NVMe driver didn't probe following a hotplug insertion and received an
>>>> SMMU error event during the insertion.
>>>
>>> What was the SMMU error - a translation/permission fault (implying the
>>> wrong DMA ops) or a bad STE fault (implying we totally failed to tell
>>> the SMMU about the device at all)?
>>>
>>
>> root at ubuntu:/sys/bus/pci/slots/4# echo 0 > power
>>
>> [__204.698522]_iommu:_Removing_device_0003:01:00.0_from_group_0
>> [  204.708704] pciehp 0003:00:00.0:pcie004: Slot(4): Link Down
>> [  204.708723] pciehp 0003:00:00.0:pcie004: Slot(4): Link Down event
>> ignored; already powering off
>>
>> root at ubuntu:/sys/bus/pci/slots/4#
>>
>> [__254.820440]_iommu:_Adding_device_0003:01:00.0_to_group_8
>> [  254.820599] nvme nvme0: pci function 0003:01:00.0
>> [  254.820621] nvme 0003:01:00.0: enabling device (0000 -> 0002)
>> [  261.948558] arm-smmu-v3 arm-smmu-v3.0.auto: event 0x0a received:
>> [  261.948561] arm-smmu-v3 arm-smmu-v3.0.auto:  0x000001000000000a
>> [  261.948563] arm-smmu-v3 arm-smmu-v3.0.auto:  0x0000000000000000
>> [  261.948564] arm-smmu-v3 arm-smmu-v3.0.auto:  0x0000000000000000
>> [  261.948566] arm-smmu-v3 arm-smmu-v3.0.auto:  0x0000000000000000

> Looks like C_BAD_CD. Can you please try with:
> iommu/arm-smmu-v3: Clear prior settings when updating STEs

This resolved the issue. Can we pull Nate's patch to 4.10 so that I don't see
this issue again.

root at ubuntu:/sys/bus/pci/slots# cd 4
root at ubuntu:/sys/bus/pci/slots/4# ls
adapter  address  attention  cur_bus_speed  latch  max_bus_speed  module  power
root at ubuntu:/sys/bus/pci/slots/4# echo 0 > power
root at ubuntu:/sys/bus/pci/slots/4# echo 1 > power
root at ubuntu:/sys/bus/pci/slots/4# dmesg |tail -n 10
[   44.136028] pci 0003:01:00.0: BAR 0: assigned [mem 0xc0100110000-0xc0100113fff 64bit]
[   44.136044] pcieport 0003:00:00.0: PCI bridge to [bus 01]
[   44.136046] pcieport 0003:00:00.0:   bridge window [io  0x10000-0x10fff]
[   44.136048] pcieport 0003:00:00.0:   bridge window [mem 0xc0100100000-0xc01002fffff]
[   44.136050] pcieport 0003:00:00.0:   bridge window [mem 0xc0400000000-0xc04001fffff 64bit pref]
[   44.136059] pcieport 0003:00:00.0: Max Payload Size set to  256/ 512 (was  256), Max Read Rq  512
[   44.136073] pci 0003:01:00.0: Max Payload Size set to  256/ 256 (was  128), Max Read Rq  512
[   44.136124] iommu: Adding device 0003:01:00.0 to group 8
[   44.136275] nvme nvme0: pci function 0003:01:00.0
[   44.136292] nvme 0003:01:00.0: enabling device (0000 -> 0002)
root at ubuntu:/sys/bus/pci/slots/4# ls /dev/nvme*
/dev/nvme0  /dev/nvme0n1
root at ubuntu:/sys/bus/pci/slots/4#

I'll look at the USB stalls next.


-- 
Sinan Kaya
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.