[PATCH v2 1/3] dt-bindings: Document Broadcom iProc mailbox controller driver

[Jonathan Richardson]

On 17-01-21 12:40 PM, Rob Herring wrote:
> On Wed, Jan 18, 2017 at 05:39:38PM -0800, Jonathan Richardson wrote:
>
> Changelog?
I'll add one.
>
>> Reviewed-by: Jonathan Richardson <jonathan.richardson at broadcom.com>
>> Tested-by: Jonathan Richardson <jonathan.richardson at broadcom.com>
>> Reviewed-by: Vikram Prakash <vikram.prakash at broadcom.com>
>> Reviewed-by: Ray Jui <ray.jui at broadcom.com>
>> Reviewed-by: Shreesha Rajashekar <shreesha.rajashekar at broadcom.com>
>> Reviewed-by: Scott Branden <scott.branden at broadcom.com>
>> Signed-off-by: Jonathan Richardson <jonathan.richardson at broadcom.com>
>> ---
>>  .../devicetree/bindings/mailbox/brcm,iproc-mailbox.txt     | 14 ++++++++++++++
>>  1 file changed, 14 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/mailbox/brcm,iproc-mailbox.txt
>>
>> diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-mailbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-mailbox.txt
>> new file mode 100644
>> index 0000000..f4c4f96
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-mailbox.txt
>> @@ -0,0 +1,14 @@
>> +* Broadcom's iProc Mailbox Controller
>> +
>> +Required properties:
>> +- compatible: Must be "brcm,iproc-mailbox"
>> +- reg: Defines the base address of the mailbox controller.
>> +- #mbox-cells: Must be 1.
>> +
>> +Example:
>> +
>> +	mailbox: mailbox at 03024024 {
> Drop the leading 0.
I'll change in dtsi also.
>
>> +		compatible = "brcm,iproc-mailbox";
>> +		reg = <0x03024024 0x8>;
>> +		#mbox-cells = <1>;
>> +	};
>> -- 
>> 1.9.1
>>