[PATCH v2 1/3] dt-bindings: Document Broadcom iProc mailbox controller driver

[Rob Herring]

On Wed, Jan 18, 2017 at 05:39:38PM -0800, Jonathan Richardson wrote:

Changelog?

> Reviewed-by: Jonathan Richardson <jonathan.richardson at broadcom.com>
> Tested-by: Jonathan Richardson <jonathan.richardson at broadcom.com>
> Reviewed-by: Vikram Prakash <vikram.prakash at broadcom.com>
> Reviewed-by: Ray Jui <ray.jui at broadcom.com>
> Reviewed-by: Shreesha Rajashekar <shreesha.rajashekar at broadcom.com>
> Reviewed-by: Scott Branden <scott.branden at broadcom.com>
> Signed-off-by: Jonathan Richardson <jonathan.richardson at broadcom.com>
> ---
>  .../devicetree/bindings/mailbox/brcm,iproc-mailbox.txt     | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mailbox/brcm,iproc-mailbox.txt
> 
> diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-mailbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-mailbox.txt
> new file mode 100644
> index 0000000..f4c4f96
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-mailbox.txt
> @@ -0,0 +1,14 @@
> +* Broadcom's iProc Mailbox Controller
> +
> +Required properties:
> +- compatible: Must be "brcm,iproc-mailbox"
> +- reg: Defines the base address of the mailbox controller.
> +- #mbox-cells: Must be 1.
> +
> +Example:
> +
> +	mailbox: mailbox at 03024024 {

Drop the leading 0.

> +		compatible = "brcm,iproc-mailbox";
> +		reg = <0x03024024 0x8>;
> +		#mbox-cells = <1>;
> +	};
> -- 
> 1.9.1
>