[PATCH v2 00/12] Add basic code support for imx6sll

[Jacky Bai]

> From: Shawn Guo [mailto:shawnguo at kernel.org]
> 
> On Tue, Dec 27, 2016 at 05:47:38PM +0800, Bai Ping wrote:
> > The i.MX 6SoloLiteLite application processors are NXP's latest
> > additions to a growing family of multimedia-focused products offering
> > high-performance processing optimized for lowest power consumption.
> > The i.MX 6SoloLiteLite processors feature NXP's advanced
> > implementation of the ARM Cortex-A9 core, which can be interfaced with
> > LPDDR3 and LPDDR2 DRAM memory devices.
> >
> > i.MX6SLL is a new SOC of the i.MX6 family, shares many common modules,
> > so most of the MSL code can be resued from i.MX6 serious SOC.
> >
> >
> > change for V2:
> >     -  address comments in dts and dtsi from Fabio.
> >     -  split the doc update into two patch, fix typo.
> >     -  address comments in clock driver, add necessary 'const'qualifier.
> >
> > Bai Ping (12):
> >   ARM: imx: Add basic msl support for imx6sll
> >   driver: clocksource: add gpt timer for imx6sll
> >   Document: dt: binding: imx: update clock doc for imx6sll
> >   driver: clk: imx: Add clock driver for imx6sll
> >   Document: dt: binding: imx: update pinctrl doc for imx6sll
> >   driver: pinctrl: imx: Add pinctrl driver support for imx6sll
> >   ARM: dts: imx: Add basic dtsi for imx6sll
> >   ARM: dts: imx: Add imx6sll EVK board dts support
> >   ARM: debug: Add low level debug support for imx6sll
> >   ARM: imx: Add suspend/resume support for imx6sll
> >   ARM: imx: correct i.mx6sll dram io low power mode
> >   ARM: configs: enable imx6sll support in defconfig
> 
> I do not think you need to necessarily put them into a series, since they will go
> through different sub-system maintainers.  If there are dependencies
> between them, you should manage to get the prerequisite parts get merged
> first.

ok, got it. 

> 
> Shawn