[PATCH v2 00/12] Add basic code support for imx6sll

[Shawn Guo]

On Tue, Dec 27, 2016 at 05:47:38PM +0800, Bai Ping wrote:
> The i.MX 6SoloLiteLite application processors are NXP's
> latest additions to a growing family of multimedia-focused
> products offering high-performance processing optimized for
> lowest power consumption. The i.MX 6SoloLiteLite processors
> feature NXP's advanced implementation of the ARM Cortex-A9 core,
> which can be interfaced with LPDDR3 and LPDDR2 DRAM memory devices.
> 
> i.MX6SLL is a new SOC of the i.MX6 family, shares many common modules,
> so most of the MSL code can be resued from i.MX6 serious SOC.
> 
> 
> change for V2:
>     -  address comments in dts and dtsi from Fabio.
>     -  split the doc update into two patch, fix typo.
>     -  address comments in clock driver, add necessary 'const'qualifier.
> 
> Bai Ping (12):
>   ARM: imx: Add basic msl support for imx6sll
>   driver: clocksource: add gpt timer for imx6sll
>   Document: dt: binding: imx: update clock doc for imx6sll
>   driver: clk: imx: Add clock driver for imx6sll
>   Document: dt: binding: imx: update pinctrl doc for imx6sll
>   driver: pinctrl: imx: Add pinctrl driver support for imx6sll
>   ARM: dts: imx: Add basic dtsi for imx6sll
>   ARM: dts: imx: Add imx6sll EVK board dts support
>   ARM: debug: Add low level debug support for imx6sll
>   ARM: imx: Add suspend/resume support for imx6sll
>   ARM: imx: correct i.mx6sll dram io low power mode
>   ARM: configs: enable imx6sll support in defconfig

I do not think you need to necessarily put them into a series, since
they will go through different sub-system maintainers.  If there are
dependencies between them, you should manage to get the prerequisite
parts get merged first.

Shawn