[PATCH 07/25] arm: keystone: dts: Remove leading 0x and 0s from bindings notation
Mathieu Malaterre
malat at debian.org
Fri Dec 15 04:46:38 PST 2017
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney at caviumnetworks.com>
Suggested-by: Rob Herring <robh at kernel.org>
Signed-off-by: Mathieu Malaterre <malat at debian.org>
---
arch/arm/boot/dts/keystone-k2e-netcp.dtsi | 2 +-
arch/arm/boot/dts/keystone-k2hk-netcp.dtsi | 2 +-
arch/arm/boot/dts/keystone-k2l-netcp.dtsi | 2 +-
arch/arm/boot/dts/keystone.dtsi | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
index ba828cb59587..940b64935bde 100644
--- a/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e-netcp.dtsi
@@ -98,7 +98,7 @@ qmss: qmss at 2a40000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
- pdsp0 at 0x2a10000 {
+ pdsp0 at 2a10000 {
reg = <0x2a10000 0x1000 /*iram */
0x2a0f000 0x100 /*reg*/
0x2a0c000 0x3c8 /*intd */
diff --git a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
index a5ac845464bf..ed7287a274a0 100644
--- a/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
@@ -115,7 +115,7 @@ qmss: qmss at 2a40000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
- pdsp0 at 0x2a10000 {
+ pdsp0 at 2a10000 {
reg = <0x2a10000 0x1000 /*iram */
0x2a0f000 0x100 /*reg*/
0x2a0c000 0x3c8 /*intd */
diff --git a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
index 66f615a74118..b6af5f78e498 100644
--- a/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l-netcp.dtsi
@@ -97,7 +97,7 @@ qmss: qmss at 2a40000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
- pdsp0 at 0x2a10000 {
+ pdsp0 at 2a10000 {
reg = <0x2a10000 0x1000 /*iram */
0x2a0f000 0x100 /*reg*/
0x2a0c000 0x3c8 /*intd */
diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
index 06e10544f9b1..f8ecbe504182 100644
--- a/arch/arm/boot/dts/keystone.dtsi
+++ b/arch/arm/boot/dts/keystone.dtsi
@@ -271,7 +271,7 @@
ti,davinci-gpio-unbanked = <32>;
};
- aemif: aemif at 21000A00 {
+ aemif: aemif at 21000a00 {
compatible = "ti,keystone-aemif", "ti,davinci-aemif";
#address-cells = <2>;
#size-cells = <1>;
--
2.11.0
More information about the linux-arm-kernel
mailing list