[PATCH v3 2/2] arm64: dts: marvell: mcbin: enable more networking ports

[Antoine Tenart]

Hi Gregory,

On Thu, Aug 24, 2017 at 10:46:39AM +0200, Antoine Tenart wrote:
> This patch enables the two GE/SFP ports. They are configured in 10GKR
> mode by default. To do this the cpm_xdmio is enabled as well, and two
> phy descriptions are added.
> 
> Signed-off-by: Antoine Tenart <antoine.tenart at free-electrons.com>
> Tested-by: Marcin Wojtas <mw at semihalf.com>

These DT changes (patches 1/2 and 2/2) came along a series with patches
on the PPv2 driver. All the net part was merged in linux-next, but these
two dt patches were not taken because we all were in holidays.

I know it's very late, but it would be very nice to have these two
patches merged for 4.14.

Thanks!
Antoine

> ---
>  arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 30 +++++++++++++++++++++++
>  1 file changed, 30 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
> index abd39d1c1739..9f0a00802452 100644
> --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
> @@ -127,6 +127,30 @@
>  	};
>  };
>  
> +&cpm_xmdio {
> +	status = "okay";
> +
> +	phy0: ethernet-phy at 0 {
> +		compatible = "ethernet-phy-ieee802.3-c45";
> +		reg = <0>;
> +	};
> +
> +	phy8: ethernet-phy at 8 {
> +		compatible = "ethernet-phy-ieee802.3-c45";
> +		reg = <8>;
> +	};
> +};
> +
> +&cpm_ethernet {
> +	status = "okay";
> +};
> +
> +&cpm_eth0 {
> +	status = "okay";
> +	phy = <&phy0>;
> +	phy-mode = "10gbase-kr";
> +};
> +
>  &cpm_sata0 {
>  	/* CPM Lane 0 - U29 */
>  	status = "okay";
> @@ -154,6 +178,12 @@
>  	status = "okay";
>  };
>  
> +&cps_eth0 {
> +	status = "okay";
> +	phy = <&phy8>;
> +	phy-mode = "10gbase-kr";
> +};
> +
>  &cps_eth1 {
>  	/* CPS Lane 0 - J5 (Gigabit RJ45) */
>  	status = "okay";
> -- 
> 2.13.5
> 

-- 
Antoine Ténart, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170830/fc91ad9c/attachment-0001.sig>