[PATCH v3 3/4] net: stmmac: register parent MDIO node for sun8i-h3-emac
Chen-Yu Tsai
wens at csie.org
Fri Aug 18 10:05:21 PDT 2017
On Fri, Aug 18, 2017 at 8:21 PM, Corentin Labbe
<clabbe.montjoie at gmail.com> wrote:
> In case of a MDIO switch, the registered MDIO node should be
> the parent of the PHY. Otherwise of_phy_connect will fail.
>
> Signed-off-by: Corentin Labbe <clabbe.montjoie at gmail.com>
> ---
> drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 12 ++++++++++--
> 1 file changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> index a366b3747eeb..ca3cc99d8960 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> @@ -312,10 +312,12 @@ static int stmmac_dt_phy(struct plat_stmmacenet_data *plat,
> static const struct of_device_id need_mdio_ids[] = {
> { .compatible = "snps,dwc-qos-ethernet-4.10" },
> { .compatible = "allwinner,sun8i-a83t-emac" },
> - { .compatible = "allwinner,sun8i-h3-emac" },
> { .compatible = "allwinner,sun8i-v3s-emac" },
> { .compatible = "allwinner,sun50i-a64-emac" },
> };
> + static const struct of_device_id need_mdio_mux_ids[] = {
> + { .compatible = "allwinner,sun8i-h3-emac" },
> + };
>
> /* If phy-handle property is passed from DT, use it as the PHY */
> plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
> @@ -332,7 +334,13 @@ static int stmmac_dt_phy(struct plat_stmmacenet_data *plat,
> mdio = false;
> }
>
> - if (of_match_node(need_mdio_ids, np)) {
> + /*
> + * In case of a MDIO switch/mux, the registered MDIO node should be
> + * the parent of the PHY. Otherwise of_phy_connect will fail.
> + */
> + if (of_match_node(need_mdio_mux_ids, np)) {
> + plat->mdio_node = of_get_parent(plat->phy_node);
Extra space before of_get_parent.
Also this is going to fail horribly if a fixed link is used.
ChenYu
> + } else if (of_match_node(need_mdio_ids, np)) {
> plat->mdio_node = of_get_child_by_name(np, "mdio");
> } else {
> /**
> --
> 2.13.0
>
More information about the linux-arm-kernel
mailing list