[PATCH v3 3/4] net: stmmac: register parent MDIO node for sun8i-h3-emac

Corentin Labbe clabbe.montjoie at gmail.com
Fri Aug 18 05:21:17 PDT 2017


In case of a MDIO switch, the registered MDIO node should be
the parent of the PHY. Otherwise of_phy_connect will fail.

Signed-off-by: Corentin Labbe <clabbe.montjoie at gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index a366b3747eeb..ca3cc99d8960 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -312,10 +312,12 @@ static int stmmac_dt_phy(struct plat_stmmacenet_data *plat,
 	static const struct of_device_id need_mdio_ids[] = {
 		{ .compatible = "snps,dwc-qos-ethernet-4.10" },
 		{ .compatible = "allwinner,sun8i-a83t-emac" },
-		{ .compatible = "allwinner,sun8i-h3-emac" },
 		{ .compatible = "allwinner,sun8i-v3s-emac" },
 		{ .compatible = "allwinner,sun50i-a64-emac" },
 	};
+	static const struct of_device_id need_mdio_mux_ids[] = {
+		{ .compatible = "allwinner,sun8i-h3-emac" },
+	};
 
 	/* If phy-handle property is passed from DT, use it as the PHY */
 	plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
@@ -332,7 +334,13 @@ static int stmmac_dt_phy(struct plat_stmmacenet_data *plat,
 		mdio = false;
 	}
 
-	if (of_match_node(need_mdio_ids, np)) {
+	/*
+	 * In case of a MDIO switch/mux, the registered MDIO node should be
+	 * the parent of the PHY. Otherwise of_phy_connect will fail.
+	 */
+	if (of_match_node(need_mdio_mux_ids, np)) {
+		 plat->mdio_node =  of_get_parent(plat->phy_node);
+	} else if (of_match_node(need_mdio_ids, np)) {
 		plat->mdio_node = of_get_child_by_name(np, "mdio");
 	} else {
 		/**
-- 
2.13.0




More information about the linux-arm-kernel mailing list