[PATCH v11 2/6] ACPI: Add APEI GHES Table Generation support
Dongjiu Geng
gengdongjiu at huawei.com
Fri Aug 18 07:23:43 PDT 2017
This implements APEI GHES Table by passing the error CPER info
to the guest via a fw_cfg_blob. After a CPER info is recorded, an
SEA(Synchronous External Abort)/SEI(SError Interrupt) exception
will be injected into the guest OS.
Below is the table layout, the max number of error soure is 11,
which is classified by notification type.
etc/acpi/tables etc/hardware_errors
==================== ==========================================
+ +--------------------------+ +------------------+
| | HEST | | address | +--------------+
| +--------------------------+ | registers | | Error Status |
| | GHES0 | | +----------------+ | Data Block 0 |
| +--------------------------+ +--------->| |status_address0 |------------->| +------------+
| | ................. | | | +----------------+ | | CPER |
| | error_status_address-----+-+ +------->| |status_address1 |----------+ | | CPER |
| | ................. | | | +----------------+ | | | .... |
| | read_ack_register--------+-+ | | ............. | | | | CPER |
| | read_ack_preserve | | | +------------------+ | | +-+------------+
| | read_ack_write | | | +----->| |status_address10|--------+ | | Error Status |
+ +--------------------------+ | | | | +----------------+ | | | Data Block 1 |
| | GHES1 | +-+-+----->| | ack_value0 | | +-->| +------------+
+ +--------------------------+ | | | +----------------+ | | | CPER |
| | ................. | | | +--->| | ack_value1 | | | | CPER |
| | error_status_address-----+---+ | | | +----------------+ | | | .... |
| | ................. | | | | | ............. | | | | CPER |
| | read_ack_register--------+-----+-+ | +----------------+ | +-+------------+
| | read_ack_preserve | | +->| | ack_value10 | | | |.......... |
| | read_ack_write | | | | +----------------+ | | +------------+
+ +--------------------------| | | | | Error Status |
| | ............... | | | | | Data Block 10|
+ +--------------------------+ | | +---->| +------------+
| | GHES10 | | | | | CPER |
+ +--------------------------+ | | | | CPER |
| | ................. | | | | | .... |
| | error_status_address-----+-----+ | | | CPER |
| | ................. | | +-+------------+
| | read_ack_register--------+---------+
| | read_ack_preserve |
| | read_ack_write |
+ +--------------------------+
For GHESv2 error source, the OSPM must acknowledges the error via Read Ack register.
so user space must check the ack value to avoid read-write race condition.
Signed-off-by: Dongjiu Geng <gengdongjiu at huawei.com>
---
hw/acpi/aml-build.c | 2 +
hw/acpi/hest_ghes.c | 345 ++++++++++++++++++++++++++++++++++++++++++++
hw/arm/virt-acpi-build.c | 6 +
include/hw/acpi/aml-build.h | 1 +
include/hw/acpi/hest_ghes.h | 47 ++++++
5 files changed, 401 insertions(+)
create mode 100644 hw/acpi/hest_ghes.c
create mode 100644 include/hw/acpi/hest_ghes.h
diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c
index 36a6cc4..6849e5f 100644
--- a/hw/acpi/aml-build.c
+++ b/hw/acpi/aml-build.c
@@ -1561,6 +1561,7 @@ void acpi_build_tables_init(AcpiBuildTables *tables)
tables->table_data = g_array_new(false, true /* clear */, 1);
tables->tcpalog = g_array_new(false, true /* clear */, 1);
tables->vmgenid = g_array_new(false, true /* clear */, 1);
+ tables->hardware_errors = g_array_new(false, true /* clear */, 1);
tables->linker = bios_linker_loader_init();
}
@@ -1571,6 +1572,7 @@ void acpi_build_tables_cleanup(AcpiBuildTables *tables, bool mfre)
g_array_free(tables->table_data, true);
g_array_free(tables->tcpalog, mfre);
g_array_free(tables->vmgenid, mfre);
+ g_array_free(tables->hardware_errors, mfre);
}
/* Build rsdt table */
diff --git a/hw/acpi/hest_ghes.c b/hw/acpi/hest_ghes.c
new file mode 100644
index 0000000..ff6b5ef
--- /dev/null
+++ b/hw/acpi/hest_ghes.c
@@ -0,0 +1,345 @@
+/*
+ * APEI GHES table Generation
+ *
+ * Copyright (C) 2017 huawei.
+ *
+ * Author: Dongjiu Geng <gengdongjiu at huawei.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+#include "qmp-commands.h"
+#include "hw/acpi/acpi.h"
+#include "hw/acpi/aml-build.h"
+#include "hw/acpi/hest_ghes.h"
+#include "hw/nvram/fw_cfg.h"
+#include "sysemu/sysemu.h"
+#include "qemu/error-report.h"
+
+/* The structure that stands for the layout
+ * GHES_ERRORS_FW_CFG_FILE fw_cfg blob
+ *
+ * etc/hardware_errors
+ * ==========================================
+ * +------------------+
+ * | address | +--------------+
+ * | registers | | Error Status |
+ * | +----------------+ | Data Block 0 |
+ * | |status_address0 |------------->| +------------+
+ * | +----------------+ | | CPER |
+ * | |status_address1 |----------+ | | CPER |
+ * | +----------------+ | | | .... |
+ * | |............. | | | | CPER |
+ * | +----------------+ | | +------------+
+ * | |status_address10|-----+ | | Error Status |
+ * | +----------------+ | | | Data Block 1 |
+ * | |ack_value0 | | +-->| +------------+
+ * | +----------------+ | | | CPER |
+ * | |ack_value1 | | | | CPER |
+ * | +----------------+ | | | .... |
+ * | | ............. | | | | CPER |
+ * | +----------------+ | +-+------------+
+ * | |ack_value10 | | | |.......... |
+ * | +----------------+ | | +------------+
+ * | | Error Status |
+ * | | Data Block10 |
+ * +------->+------------+
+ * | | CPER |
+ * | | CPER |
+ * | | .... |
+ * | | CPER |
+ * +-+------------+
+ */
+struct hardware_errors_buffer {
+ /* Generic Error Status Block register */
+ uint64_t gesb_address[GHES_ACPI_HEST_NOTIFY_RESERVED];
+ uint64_t ack_value[GHES_ACPI_HEST_NOTIFY_RESERVED];
+ char gesb[GHES_MAX_RAW_DATA_LENGTH][GHES_ACPI_HEST_NOTIFY_RESERVED];
+};
+
+static int ghes_record_cper(uint64_t error_block_address,
+ uint64_t error_physical_addr)
+{
+ AcpiGenericErrorStatus block;
+ AcpiGenericErrorData *gdata;
+ UefiCperSecMemErr *mem_err;
+ uint64_t current_block_length;
+ unsigned char *buffer;
+ /* memory section */
+ char mem_section_id_le[] = {0x14, 0x11, 0xBC, 0xA5, 0x64, 0x6F, 0xDE,
+ 0x4E, 0xB8, 0x63, 0x3E, 0x83, 0xED, 0x7C,
+ 0x83, 0xB1};
+
+ cpu_physical_memory_read(error_block_address, &block,
+ sizeof(AcpiGenericErrorStatus));
+
+ /* Get the current generic error status block length */
+ current_block_length = sizeof(AcpiGenericErrorStatus) +
+ le32_to_cpu(block.data_length);
+
+ /* If the Generic Error Status Block is NULL, update
+ * the block header
+ */
+ if (!block.block_status) {
+ block.block_status = ACPI_GEBS_UNCORRECTABLE;
+ block.error_severity = ACPI_CPER_SEV_RECOVERABLE;
+ }
+
+ block.data_length += cpu_to_le32(sizeof(AcpiGenericErrorData));
+ block.data_length += cpu_to_le32(sizeof(UefiCperSecMemErr));
+
+ /* check whether it runs out of the preallocated memory */
+ if ((le32_to_cpu(block.data_length) + sizeof(AcpiGenericErrorStatus)) >
+ GHES_MAX_RAW_DATA_LENGTH) {
+ error_report("Record CPER out of boundary!!!");
+ return GHES_CPER_FAIL;
+ }
+
+ /* Write back the Generic Error Status Block to guest memory */
+ cpu_physical_memory_write(error_block_address, &block,
+ sizeof(AcpiGenericErrorStatus));
+
+ /* Fill in Generic Error Data Entry */
+ buffer = g_malloc0(sizeof(AcpiGenericErrorData) +
+ sizeof(UefiCperSecMemErr));
+
+
+ memset(buffer, 0, sizeof(AcpiGenericErrorData) + sizeof(UefiCperSecMemErr));
+ gdata = (AcpiGenericErrorData *)buffer;
+
+ /* Memory section */
+ memcpy(&(gdata->section_type_le), &mem_section_id_le,
+ sizeof(mem_section_id_le));
+
+ /* error severity is recoverable */
+ gdata->error_severity = ACPI_CPER_SEV_RECOVERABLE;
+ gdata->revision = 0x300; /* the revision number is 0x300 */
+ gdata->error_data_length = cpu_to_le32(sizeof(UefiCperSecMemErr));
+
+ mem_err = (UefiCperSecMemErr *) (gdata + 1);
+
+ /* User space only handle the memory section CPER */
+
+ /* Hard code to Multi-bit ECC error */
+ mem_err->validation_bits |= cpu_to_le32(UEFI_CPER_MEM_VALID_ERROR_TYPE);
+ mem_err->error_type = cpu_to_le32(UEFI_CPER_MEM_ERROR_TYPE_MULTI_ECC);
+
+ /* Record the physical address at which the memory error occurred */
+ mem_err->validation_bits |= cpu_to_le32(UEFI_CPER_MEM_VALID_PA);
+ mem_err->physical_addr = cpu_to_le32(error_physical_addr);
+
+ /* Write back the Generic Error Data Entry to guest memory */
+ cpu_physical_memory_write(error_block_address + current_block_length,
+ buffer, sizeof(AcpiGenericErrorData) + sizeof(UefiCperSecMemErr));
+
+ g_free(buffer);
+ return GHES_CPER_OK;
+}
+
+static void
+build_address(GArray *table_data, BIOSLinker *linker,
+ uint32_t dst_patched_offset, uint32_t src_offset,
+ uint8_t address_space_id , uint8_t register_bit_width,
+ uint8_t register_bit_offset, uint8_t access_size)
+{
+ uint32_t address_size = sizeof(struct AcpiGenericAddress) -
+ offsetof(struct AcpiGenericAddress, address);
+
+ /* Address space */
+ build_append_int_noprefix(table_data, address_space_id, 1);
+ /* register bit width */
+ build_append_int_noprefix(table_data, register_bit_width, 1);
+ /* register bit offset */
+ build_append_int_noprefix(table_data, register_bit_offset, 1);
+ /* access size */
+ build_append_int_noprefix(table_data, access_size, 1);
+ acpi_data_push(table_data, address_size);
+
+ /* Patch address of ERRORS fw_cfg blob into the TABLE fw_cfg blob so OSPM
+ * can retrieve and read it. the address size is 64 bits.
+ */
+ bios_linker_loader_add_pointer(linker,
+ ACPI_BUILD_TABLE_FILE, dst_patched_offset, sizeof(uint64_t),
+ GHES_ERRORS_FW_CFG_FILE, src_offset);
+}
+
+void ghes_build_acpi(GArray *table_data, GArray *hardware_error,
+ BIOSLinker *linker)
+{
+ uint32_t ghes_start = table_data->len;
+ uint32_t address_size, error_status_address_offset;
+ uint32_t read_ack_register_offset, i;
+
+ address_size = sizeof(struct AcpiGenericAddress) -
+ offsetof(struct AcpiGenericAddress, address);
+
+ error_status_address_offset = ghes_start +
+ sizeof(AcpiHardwareErrorSourceTable) +
+ offsetof(AcpiGenericHardwareErrorSourceV2, error_status_address) +
+ offsetof(struct AcpiGenericAddress, address);
+
+ read_ack_register_offset = ghes_start +
+ sizeof(AcpiHardwareErrorSourceTable) +
+ offsetof(AcpiGenericHardwareErrorSourceV2, read_ack_register) +
+ offsetof(struct AcpiGenericAddress, address);
+
+ acpi_data_push(hardware_error,
+ offsetof(struct hardware_errors_buffer, ack_value));
+ for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++)
+ /* Initialize read ack register */
+ build_append_int_noprefix((void *)hardware_error, 1, 8);
+
+ /* Reserved the total size for ERRORS fw_cfg blob
+ */
+ acpi_data_push(hardware_error, sizeof(struct hardware_errors_buffer));
+
+ /* Allocate guest memory for the Data fw_cfg blob */
+ bios_linker_loader_alloc(linker, GHES_ERRORS_FW_CFG_FILE, hardware_error,
+ 1, false);
+ /* Reserve table header size */
+ acpi_data_push(table_data, sizeof(AcpiTableHeader));
+
+ build_append_int_noprefix(table_data, GHES_ACPI_HEST_NOTIFY_RESERVED, 4);
+
+ for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++) {
+ build_append_int_noprefix(table_data,
+ ACPI_HEST_SOURCE_GENERIC_ERROR_V2, 2); /* type */
+ /* source id */
+ build_append_int_noprefix(table_data, cpu_to_le16(i), 2);
+ /* related source id */
+ build_append_int_noprefix(table_data, 0xffff, 2);
+ build_append_int_noprefix(table_data, 0, 1); /* flags */
+
+ /* Currently only enable SEA notification type to avoid the kernel
+ * warning, reserve the space for other notification error source
+ */
+ if (i == ACPI_HEST_NOTIFY_SEA) {
+ build_append_int_noprefix(table_data, 1, 1); /* enabled */
+ } else {
+ build_append_int_noprefix(table_data, 0, 1); /* enabled */
+ }
+
+ /* The number of error status block per generic hardware error source */
+ build_append_int_noprefix(table_data, 1, 4);
+ /* Max sections per record */
+ build_append_int_noprefix(table_data, 1, 4);
+ /* Max raw data length */
+ build_append_int_noprefix(table_data, GHES_MAX_RAW_DATA_LENGTH, 4);
+
+ /* Build error status address*/
+ build_address(table_data, linker, error_status_address_offset + i *
+ sizeof(AcpiGenericHardwareErrorSourceV2), i * address_size,
+ AML_SYSTEM_MEMORY, 0x40, 0, 4 /* QWord access */);
+
+ /* Hardware error notification structure */
+ build_append_int_noprefix(table_data, i, 1); /* type */
+ /* length */
+ build_append_int_noprefix(table_data, sizeof(AcpiHestNotify), 1);
+ build_append_int_noprefix(table_data, 0, 26);
+
+ /* Error Status Block Length */
+ build_append_int_noprefix(table_data,
+ cpu_to_le32(GHES_MAX_RAW_DATA_LENGTH), 4);
+
+ /* Build read ack register */
+ build_address(table_data, linker, read_ack_register_offset + i *
+ sizeof(AcpiGenericHardwareErrorSourceV2),
+ offsetof(struct hardware_errors_buffer, ack_value) +
+ i * address_size, AML_SYSTEM_MEMORY, 0x40, 0,
+ 4 /* QWord access */);
+
+ /* Read ack preserve */
+ build_append_int_noprefix(table_data, cpu_to_le64(0xfffffffe), 8);
+
+ /* Read ack write */
+ build_append_int_noprefix(table_data, cpu_to_le64(0x1), 8);
+ }
+
+ for (i = 0; i < GHES_ACPI_HEST_NOTIFY_RESERVED; i++)
+ /* Patch address of generic error status block into
+ * the address register so OSPM can retrieve and read it.
+ */
+ bios_linker_loader_add_pointer(linker,
+ GHES_ERRORS_FW_CFG_FILE, address_size * i, address_size,
+ GHES_ERRORS_FW_CFG_FILE,
+ offsetof(struct hardware_errors_buffer, gesb) +
+ i * GHES_MAX_RAW_DATA_LENGTH);
+
+ /* Patch address of ERRORS fw_cfg blob into the ADDR fw_cfg blob
+ * so QEMU can write the ERRORS there. The address is expected to be
+ * < 4GB, but write 64 bits anyway.
+ */
+ bios_linker_loader_write_pointer(linker, GHES_DATA_ADDR_FW_CFG_FILE,
+ 0, address_size, GHES_ERRORS_FW_CFG_FILE,
+ offsetof(struct hardware_errors_buffer, gesb));
+
+ build_header(linker, table_data,
+ (void *)(table_data->data + ghes_start), "HEST",
+ table_data->len - ghes_start, 1, NULL, "GHES");
+}
+
+static GhesState ges;
+void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_error)
+{
+
+ size_t request_block_size = sizeof(uint64_t) + GHES_MAX_RAW_DATA_LENGTH;
+ size_t size = GHES_ACPI_HEST_NOTIFY_RESERVED * request_block_size;
+
+ /* Create a read-only fw_cfg file for GHES */
+ fw_cfg_add_file(s, GHES_ERRORS_FW_CFG_FILE, hardware_error->data,
+ size);
+ /* Create a read-write fw_cfg file for Address */
+ fw_cfg_add_file_callback(s, GHES_DATA_ADDR_FW_CFG_FILE, NULL, NULL,
+ &ges.ghes_addr_le, sizeof(ges.ghes_addr_le), false);
+}
+
+bool ghes_update_guest(uint32_t notify, uint64_t physical_address)
+{
+ uint64_t error_block_addr;
+ uint64_t ack_value_addr, ack_value = 0;
+ int loop = 0, ack_value_size;
+ bool ret = GHES_CPER_FAIL;
+
+ ack_value_size = (offsetof(struct hardware_errors_buffer, gesb) -
+ offsetof(struct hardware_errors_buffer, ack_value)) /
+ GHES_ACPI_HEST_NOTIFY_RESERVED;
+
+ if (physical_address && notify < GHES_ACPI_HEST_NOTIFY_RESERVED) {
+ error_block_addr = ges.ghes_addr_le + notify * GHES_MAX_RAW_DATA_LENGTH;
+ error_block_addr = le32_to_cpu(error_block_addr);
+
+ ack_value_addr = ges.ghes_addr_le -
+ (GHES_ACPI_HEST_NOTIFY_RESERVED - notify) * ack_value_size;
+retry:
+ cpu_physical_memory_read(ack_value_addr, &ack_value, ack_value_size);
+ if (!ack_value) {
+ if (loop < 3) {
+ usleep(100 * 1000);
+ loop++;
+ goto retry;
+ } else {
+ error_report("Last time OSPM does not acknowledge the error,"
+ " record CPER failed this time, set the ack value to"
+ " avoid blocking next time CPER record! exit");
+ ack_value = 1;
+ cpu_physical_memory_write(ack_value_addr,
+ &ack_value, ack_value_size);
+ return ret;
+ }
+ } else {
+ /* A zero value in ghes_addr means that BIOS has not yet written
+ * the address
+ */
+ if (error_block_addr) {
+ ack_value = 0;
+ cpu_physical_memory_write(ack_value_addr,
+ &ack_value, ack_value_size);
+ ret = ghes_record_cper(error_block_addr, physical_address);
+ }
+ }
+ }
+ return ret;
+}
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 3d78ff6..def1ec1 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -45,6 +45,7 @@
#include "hw/arm/virt.h"
#include "sysemu/numa.h"
#include "kvm_arm.h"
+#include "hw/acpi/hest_ghes.h"
#define ARM_SPI_BASE 32
#define ACPI_POWER_BUTTON_DEVICE "PWRB"
@@ -771,6 +772,9 @@ void virt_acpi_build(VirtMachineState *vms, AcpiBuildTables *tables)
acpi_add_table(table_offsets, tables_blob);
build_spcr(tables_blob, tables->linker, vms);
+ acpi_add_table(table_offsets, tables_blob);
+ ghes_build_acpi(tables_blob, tables->hardware_errors, tables->linker);
+
if (nb_numa_nodes > 0) {
acpi_add_table(table_offsets, tables_blob);
build_srat(tables_blob, tables->linker, vms);
@@ -887,6 +891,8 @@ void virt_acpi_setup(VirtMachineState *vms)
fw_cfg_add_file(vms->fw_cfg, ACPI_BUILD_TPMLOG_FILE, tables.tcpalog->data,
acpi_data_len(tables.tcpalog));
+ ghes_add_fw_cfg(vms->fw_cfg, tables.hardware_errors);
+
build_state->rsdp_mr = acpi_add_rom_blob(build_state, tables.rsdp,
ACPI_BUILD_RSDP_FILE, 0);
diff --git a/include/hw/acpi/aml-build.h b/include/hw/acpi/aml-build.h
index 88d0738..7f7b55c 100644
--- a/include/hw/acpi/aml-build.h
+++ b/include/hw/acpi/aml-build.h
@@ -211,6 +211,7 @@ struct AcpiBuildTables {
GArray *rsdp;
GArray *tcpalog;
GArray *vmgenid;
+ GArray *hardware_errors;
BIOSLinker *linker;
} AcpiBuildTables;
diff --git a/include/hw/acpi/hest_ghes.h b/include/hw/acpi/hest_ghes.h
new file mode 100644
index 0000000..0772756
--- /dev/null
+++ b/include/hw/acpi/hest_ghes.h
@@ -0,0 +1,47 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Authors:
+ * Dongjiu Geng <gengdongjiu at huawei.com>
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef ACPI_GHES_H
+#define ACPI_GHES_H
+
+#include "hw/acpi/bios-linker-loader.h"
+
+#define GHES_ERRORS_FW_CFG_FILE "etc/hardware_errors"
+#define GHES_DATA_ADDR_FW_CFG_FILE "etc/hardware_errors_addr"
+
+#define GHES_GAS_ADDRESS_OFFSET 4
+#define GHES_ERROR_STATUS_ADDRESS_OFFSET 20
+#define GHES_NOTIFICATION_STRUCTURE 32
+
+#define GHES_CPER_OK 1
+#define GHES_CPER_FAIL 0
+
+#define GHES_ACPI_HEST_NOTIFY_RESERVED 11
+/* The max size in Bytes for one error block */
+#define GHES_MAX_RAW_DATA_LENGTH 0x1000
+
+
+typedef struct GhesState {
+ uint64_t ghes_addr_le;
+} GhesState;
+
+void ghes_build_acpi(GArray *table_data, GArray *hardware_error,
+ BIOSLinker *linker);
+void ghes_add_fw_cfg(FWCfgState *s, GArray *hardware_errors);
+bool ghes_update_guest(uint32_t notify, uint64_t error_physical_addr);
+#endif
--
1.8.3.1
More information about the linux-arm-kernel
mailing list