[Query] Enabling parent device clock from resume_noirq
Kishon Vijay Abraham I
kishon at ti.com
Wed Apr 19 07:10:20 EDT 2017
Hi,
On Wednesday 19 April 2017 01:35 AM, Grygorii Strashko wrote:
> + linux-pm
>
> On 04/18/2017 01:07 AM, Kishon Vijay Abraham I wrote:
>> Hi,
>>
>> resume_noirq callbacks are used in PCIe core to restore PCI state (this
>> accesses PCI module). So the clocks of PCI module has to be enabled before
>> resume_noirq.
>>
>> The clocks for the PCI module in DRA7xx is provided by PIPE3 PHY device which
>> in turn gets it's clock from OCP2SCP device. During resume_noirq callbacks,
>> pm_runtime is disabled, so pm_runtime_get_sync is ineffective. However
>> pm_runtime can be enabled using pm_runtime_force_resume. Now the problem is
>> adding pm_runtime_force_resume() in resume_noirq callback of pci-dra7xx driver
>> will enable only the pm_runtime of PCI device but not PIPE3 PHY or OCP2SCP.
>> Adding pm_runtime_force_resume() in resume_noirq callback of PIPE3 PHY driver
>> or OCP2SCP driver will not help if the resume_noirq callbacks in PIP3PHY driver
>> and OCP2SCP driver are invoked after the resume_noirq of pci-dra7xx driver.
>>
>> How to enable the pm_runtime of parent devices in resume_noirq callback? Does
>> existing pm_runtime framework has support for that?
>>
>
> Most probably you've hit the issue described in [1].
> In general, if pci-dra7xx is consumer of PIPE3 PHY device and
> PIPE3 PHY device is child of OCP2SCP then suspend/resume order should be
> - pci-dra7xx
> - PIPE3 PHY
> - OCP2SCP
> and resume
> - OCP2SCP
> - PIPE3 PHY
> - pci-dra7xx
> and in this case pm_runtime_force_x() might work.
>
> Hence, approach [1] was not accepted (personally I still like it) and
> "Functional dependencies tracking support" was introduced instead by commit 9ed9895 [2]
> you can try it.
>
> But, as per code, I'm not sure that Functional dependencies properly tracked in
> pm_runtime_force_x() functions.
>
> PS: you can try to reorder device's nodes in DT and place PCI node after "ocp2scp" :P
reordering helps ;-) I'll try the functional dependencies.
Thanks for the hint :-)
Cheers
Kishon
More information about the linux-arm-kernel
mailing list