[RESEND PATCH v4] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs

Lee Jones lee.jones at linaro.org
Tue Apr 11 01:01:22 PDT 2017


On Tue, 11 Apr 2017, Quentin Schulz wrote:
> On 10/04/2017 16:54, Lee Jones wrote:
> > On Mon, 10 Apr 2017, Quentin Schulz wrote:
> > 
> >> Hi Lee,
> >>
> >> Just to make sure you didn't miss that patch (can't find it in
> >> for-mfd-next and for-mfd-next-next).
> > 
> > It has not been missed, but is yet to be reviewed.
> > 
> 
> Hum.. What do you mean exactly? The maintainer of the AXP PMICs has
> given its Acked-by and the maintainer of the IIO subsystem has given its
> Reviewed-by. Is there something I'm missing (in your workflow maybe)?

I mean I haven't reviewed and picked it up yet.

I will get around to it shortly.

> >> On 04/04/2017 08:34, Quentin Schulz wrote:
> >>> The X-Powers AXP20X and AXP22X PMICs have multiple ADCs. They expose the
> >>> battery voltage, battery charge and discharge currents, AC-in and VBUS
> >>> voltages and currents, 2 GPIOs muxable in ADC mode and PMIC temperature.
> >>>
> >>> This adds support for most of AXP20X and AXP22X ADCs.
> >>>
> >>> Signed-off-by: Quentin Schulz <quentin.schulz at free-electrons.com>
> >>> Acked-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> >>> Acked-by: Chen-Yu Tsai <wens at csie.org>
> >>> Reviewed-by: Jonathan Cameron <jic23 at kernel.org>
> >>> ---
> >>>
> >>> Lee, could you merge this through the mfd tree please?
> >>>  => https://lkml.org/lkml/2017/3/22/47
> >>>
> >>> v4:
> >>>  - added missing space at the beginning of a comment,
> >>>  - tidied axp20x_adc_offset_voltage and axp20x_write_raw to use switch case
> >>>  instead of if conditions,
> >>>  - added MODULE_DEVICE_TABLE for axp20x_adc_id_match for module autoloading,
> >>>  - merged two lines in axp20x_remove,
> >>>
> >>> v3:
> >>>  - moved from switch to if condition in axp20x_adc_raw and
> >>>  axp22x_adc_raw,
> >>>  - removed DT support as DT node has been dropped,
> >>>    - use of platform_device_id
> >>>  - correctly defined the name of the iio device (name used to probe the
> >>>  driver),
> >>>  - added goto for errors in probe,
> >>>  - added iio_map_array_unregister to the remove function,
> >>>
> >>> v2:
> >>>  - removed unused defines,
> >>>  - changed BIT(x) to 1 << x when describing bits purpose for which 2 <<
> >>>  x or 3 << x exists, to be consistent,
> >>>  - changed ADC rate defines to macro formulas,
> >>>  - reordered IIO channels, now different measures (current/voltage) of
> >>>  the same part of the PMIC (e.g. battery), have the same IIO channel in
> >>>  their respective IIO type. When a part of the PMIC have only one
> >>>  measure, a number is jumped,
> >>>  - left IIO channel mapping in DT to use iio_map structure,
> >>>  - removed indexing of ADC internal temperature,
> >>>  - removed unused iio_dev structure in axp20x_adc_iio,
> >>>  - added a structure for data specific to AXP20X or AXP22X PMICs instead
> >>>  of using an ID and an if condition when needing to separate the
> >>>  behaviour of both,
> >>>  - added a comment on batt_chrg_i really being on 12bits rather than
> >>>  what the Chinese datasheets say (13 bits),
> >>>  - corrected the offset for AXP22X PMIC temperature,
> >>>  - set the ADC rate to a value (100Hz) shared by the AXP20X and AXP22X,
> >>>  - created macro formulas to compute the ADC rate for each,
> >>>  - added a condition on presence of ADC_EN2 reg before setting/resetting
> >>>  it,
> >>>  - switched from devm_iio_device_unregister to the non-devm function
> >>>  because of the need for a remove function,
> >>>  - removed some dead code,
> >>>
> >>>  drivers/iio/adc/Kconfig      |  10 +
> >>>  drivers/iio/adc/Makefile     |   1 +
> >>>  drivers/iio/adc/axp20x_adc.c | 617 +++++++++++++++++++++++++++++++++++++++++++
> >>>  3 files changed, 628 insertions(+)
> >>>  create mode 100644 drivers/iio/adc/axp20x_adc.c
> >>>
> >>> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> >>> index d777a97..d15e1bd 100644
> >>> --- a/drivers/iio/adc/Kconfig
> >>> +++ b/drivers/iio/adc/Kconfig
> >>> @@ -154,6 +154,16 @@ config AT91_SAMA5D2_ADC
> >>>  	  To compile this driver as a module, choose M here: the module will be
> >>>  	  called at91-sama5d2_adc.
> >>>  
> >>> +config AXP20X_ADC
> >>> +	tristate "X-Powers AXP20X and AXP22X ADC driver"
> >>> +	depends on MFD_AXP20X
> >>> +	help
> >>> +	  Say yes here to have support for X-Powers power management IC (PMIC)
> >>> +	  AXP20X and AXP22X ADC devices.
> >>> +
> >>> +	  To compile this driver as a module, choose M here: the module will be
> >>> +	  called axp20x_adc.
> >>> +
> >>>  config AXP288_ADC
> >>>  	tristate "X-Powers AXP288 ADC driver"
> >>>  	depends on MFD_AXP20X
> >>> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> >>> index b11bb57..17899b5 100644
> >>> --- a/drivers/iio/adc/Makefile
> >>> +++ b/drivers/iio/adc/Makefile
> >>> @@ -16,6 +16,7 @@ obj-$(CONFIG_AD7887) += ad7887.o
> >>>  obj-$(CONFIG_AD799X) += ad799x.o
> >>>  obj-$(CONFIG_AT91_ADC) += at91_adc.o
> >>>  obj-$(CONFIG_AT91_SAMA5D2_ADC) += at91-sama5d2_adc.o
> >>> +obj-$(CONFIG_AXP20X_ADC) += axp20x_adc.o
> >>>  obj-$(CONFIG_AXP288_ADC) += axp288_adc.o
> >>>  obj-$(CONFIG_BCM_IPROC_ADC) += bcm_iproc_adc.o
> >>>  obj-$(CONFIG_BERLIN2_ADC) += berlin2-adc.o
> >>> diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c
> >>> new file mode 100644
> >>> index 0000000..11e1771
> >>> --- /dev/null
> >>> +++ b/drivers/iio/adc/axp20x_adc.c
> >>> @@ -0,0 +1,617 @@
> >>> +/* ADC driver for AXP20X and AXP22X PMICs
> >>> + *
> >>> + * Copyright (c) 2016 Free Electrons NextThing Co.
> >>> + *	Quentin Schulz <quentin.schulz at free-electrons.com>
> >>> + *
> >>> + * This program is free software; you can redistribute it and/or modify it under
> >>> + * the terms of the GNU General Public License version 2 as published by the
> >>> + * Free Software Foundation.
> >>> + */
> >>> +
> >>> +#include <linux/completion.h>
> >>> +#include <linux/interrupt.h>
> >>> +#include <linux/io.h>
> >>> +#include <linux/module.h>
> >>> +#include <linux/of.h>
> >>> +#include <linux/of_device.h>
> >>> +#include <linux/platform_device.h>
> >>> +#include <linux/pm_runtime.h>
> >>> +#include <linux/regmap.h>
> >>> +#include <linux/thermal.h>
> >>> +
> >>> +#include <linux/iio/iio.h>
> >>> +#include <linux/iio/driver.h>
> >>> +#include <linux/iio/machine.h>
> >>> +#include <linux/mfd/axp20x.h>
> >>> +
> >>> +#define AXP20X_ADC_EN1_MASK			GENMASK(7, 0)
> >>> +
> >>> +#define AXP20X_ADC_EN2_MASK			(GENMASK(3, 2) | BIT(7))
> >>> +#define AXP22X_ADC_EN1_MASK			(GENMASK(7, 5) | BIT(0))
> >>> +
> >>> +#define AXP20X_GPIO10_IN_RANGE_GPIO0		BIT(0)
> >>> +#define AXP20X_GPIO10_IN_RANGE_GPIO1		BIT(1)
> >>> +#define AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(x)	((x) & BIT(0))
> >>> +#define AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(x)	(((x) & BIT(0)) << 1)
> >>> +
> >>> +#define AXP20X_ADC_RATE_MASK			GENMASK(7, 6)
> >>> +#define AXP20X_ADC_RATE_HZ(x)			((ilog2((x) / 25) << 6) & AXP20X_ADC_RATE_MASK)
> >>> +#define AXP22X_ADC_RATE_HZ(x)			((ilog2((x) / 100) << 6) & AXP20X_ADC_RATE_MASK)
> >>> +
> >>> +#define AXP20X_ADC_CHANNEL(_channel, _name, _type, _reg)	\
> >>> +	{							\
> >>> +		.type = _type,					\
> >>> +		.indexed = 1,					\
> >>> +		.channel = _channel,				\
> >>> +		.address = _reg,				\
> >>> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |	\
> >>> +				      BIT(IIO_CHAN_INFO_SCALE),	\
> >>> +		.datasheet_name = _name,			\
> >>> +	}
> >>> +
> >>> +#define AXP20X_ADC_CHANNEL_OFFSET(_channel, _name, _type, _reg) \
> >>> +	{							\
> >>> +		.type = _type,					\
> >>> +		.indexed = 1,					\
> >>> +		.channel = _channel,				\
> >>> +		.address = _reg,				\
> >>> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |	\
> >>> +				      BIT(IIO_CHAN_INFO_SCALE) |\
> >>> +				      BIT(IIO_CHAN_INFO_OFFSET),\
> >>> +		.datasheet_name = _name,			\
> >>> +	}
> >>> +
> >>> +struct axp_data;
> >>> +
> >>> +struct axp20x_adc_iio {
> >>> +	struct regmap		*regmap;
> >>> +	struct axp_data		*data;
> >>> +};
> >>> +
> >>> +enum axp20x_adc_channel_v {
> >>> +	AXP20X_ACIN_V = 0,
> >>> +	AXP20X_VBUS_V,
> >>> +	AXP20X_TS_IN,
> >>> +	AXP20X_GPIO0_V,
> >>> +	AXP20X_GPIO1_V,
> >>> +	AXP20X_IPSOUT_V,
> >>> +	AXP20X_BATT_V,
> >>> +};
> >>> +
> >>> +enum axp20x_adc_channel_i {
> >>> +	AXP20X_ACIN_I = 0,
> >>> +	AXP20X_VBUS_I,
> >>> +	AXP20X_BATT_CHRG_I,
> >>> +	AXP20X_BATT_DISCHRG_I,
> >>> +};
> >>> +
> >>> +enum axp22x_adc_channel_v {
> >>> +	AXP22X_TS_IN = 0,
> >>> +	AXP22X_BATT_V,
> >>> +};
> >>> +
> >>> +enum axp22x_adc_channel_i {
> >>> +	AXP22X_BATT_CHRG_I = 1,
> >>> +	AXP22X_BATT_DISCHRG_I,
> >>> +};
> >>> +
> >>> +static struct iio_map axp20x_maps[] = {
> >>> +	{
> >>> +		.consumer_dev_name = "axp20x-usb-power-supply",
> >>> +		.consumer_channel = "vbus_v",
> >>> +		.adc_channel_label = "vbus_v",
> >>> +	}, {
> >>> +		.consumer_dev_name = "axp20x-usb-power-supply",
> >>> +		.consumer_channel = "vbus_i",
> >>> +		.adc_channel_label = "vbus_i",
> >>> +	}, {
> >>> +		.consumer_dev_name = "axp20x-ac-power-supply",
> >>> +		.consumer_channel = "acin_v",
> >>> +		.adc_channel_label = "acin_v",
> >>> +	}, {
> >>> +		.consumer_dev_name = "axp20x-ac-power-supply",
> >>> +		.consumer_channel = "acin_i",
> >>> +		.adc_channel_label = "acin_i",
> >>> +	}, {
> >>> +		.consumer_dev_name = "axp20x-battery-power-supply",
> >>> +		.consumer_channel = "batt_v",
> >>> +		.adc_channel_label = "batt_v",
> >>> +	}, {
> >>> +		.consumer_dev_name = "axp20x-battery-power-supply",
> >>> +		.consumer_channel = "batt_chrg_i",
> >>> +		.adc_channel_label = "batt_chrg_i",
> >>> +	}, {
> >>> +		.consumer_dev_name = "axp20x-battery-power-supply",
> >>> +		.consumer_channel = "batt_dischrg_i",
> >>> +		.adc_channel_label = "batt_dischrg_i",
> >>> +	}, { /* sentinel */ }
> >>> +};
> >>> +
> >>> +static struct iio_map axp22x_maps[] = {
> >>> +	{
> >>> +		.consumer_dev_name = "axp20x-battery-power-supply",
> >>> +		.consumer_channel = "batt_v",
> >>> +		.adc_channel_label = "batt_v",
> >>> +	}, {
> >>> +		.consumer_dev_name = "axp20x-battery-power-supply",
> >>> +		.consumer_channel = "batt_chrg_i",
> >>> +		.adc_channel_label = "batt_chrg_i",
> >>> +	}, {
> >>> +		.consumer_dev_name = "axp20x-battery-power-supply",
> >>> +		.consumer_channel = "batt_dischrg_i",
> >>> +		.adc_channel_label = "batt_dischrg_i",
> >>> +	}, { /* sentinel */ }
> >>> +};
> >>> +
> >>> +/*
> >>> + * Channels are mapped by physical system. Their channels share the same index.
> >>> + * i.e. acin_i is in_current0_raw and acin_v is in_voltage0_raw.
> >>> + * The only exception is for the battery. batt_v will be in_voltage6_raw and
> >>> + * charge current in_current6_raw and discharge current will be in_current7_raw.
> >>> + */
> >>> +static const struct iio_chan_spec axp20x_adc_channels[] = {
> >>> +	AXP20X_ADC_CHANNEL(AXP20X_ACIN_V, "acin_v", IIO_VOLTAGE,
> >>> +			   AXP20X_ACIN_V_ADC_H),
> >>> +	AXP20X_ADC_CHANNEL(AXP20X_ACIN_I, "acin_i", IIO_CURRENT,
> >>> +			   AXP20X_ACIN_I_ADC_H),
> >>> +	AXP20X_ADC_CHANNEL(AXP20X_VBUS_V, "vbus_v", IIO_VOLTAGE,
> >>> +			   AXP20X_VBUS_V_ADC_H),
> >>> +	AXP20X_ADC_CHANNEL(AXP20X_VBUS_I, "vbus_i", IIO_CURRENT,
> >>> +			   AXP20X_VBUS_I_ADC_H),
> >>> +	{
> >>> +		.type = IIO_TEMP,
> >>> +		.address = AXP20X_TEMP_ADC_H,
> >>> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> >>> +				      BIT(IIO_CHAN_INFO_SCALE) |
> >>> +				      BIT(IIO_CHAN_INFO_OFFSET),
> >>> +		.datasheet_name = "pmic_temp",
> >>> +	},
> >>> +	AXP20X_ADC_CHANNEL_OFFSET(AXP20X_GPIO0_V, "gpio0_v", IIO_VOLTAGE,
> >>> +				  AXP20X_GPIO0_V_ADC_H),
> >>> +	AXP20X_ADC_CHANNEL_OFFSET(AXP20X_GPIO1_V, "gpio1_v", IIO_VOLTAGE,
> >>> +				  AXP20X_GPIO1_V_ADC_H),
> >>> +	AXP20X_ADC_CHANNEL(AXP20X_IPSOUT_V, "ipsout_v", IIO_VOLTAGE,
> >>> +			   AXP20X_IPSOUT_V_HIGH_H),
> >>> +	AXP20X_ADC_CHANNEL(AXP20X_BATT_V, "batt_v", IIO_VOLTAGE,
> >>> +			   AXP20X_BATT_V_H),
> >>> +	AXP20X_ADC_CHANNEL(AXP20X_BATT_CHRG_I, "batt_chrg_i", IIO_CURRENT,
> >>> +			   AXP20X_BATT_CHRG_I_H),
> >>> +	AXP20X_ADC_CHANNEL(AXP20X_BATT_DISCHRG_I, "batt_dischrg_i", IIO_CURRENT,
> >>> +			   AXP20X_BATT_DISCHRG_I_H),
> >>> +};
> >>> +
> >>> +static const struct iio_chan_spec axp22x_adc_channels[] = {
> >>> +	{
> >>> +		.type = IIO_TEMP,
> >>> +		.address = AXP22X_PMIC_TEMP_H,
> >>> +		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> >>> +				      BIT(IIO_CHAN_INFO_SCALE) |
> >>> +				      BIT(IIO_CHAN_INFO_OFFSET),
> >>> +		.datasheet_name = "pmic_temp",
> >>> +	},
> >>> +	AXP20X_ADC_CHANNEL(AXP22X_BATT_V, "batt_v", IIO_VOLTAGE,
> >>> +			   AXP20X_BATT_V_H),
> >>> +	AXP20X_ADC_CHANNEL(AXP22X_BATT_CHRG_I, "batt_chrg_i", IIO_CURRENT,
> >>> +			   AXP20X_BATT_CHRG_I_H),
> >>> +	AXP20X_ADC_CHANNEL(AXP22X_BATT_DISCHRG_I, "batt_dischrg_i", IIO_CURRENT,
> >>> +			   AXP20X_BATT_DISCHRG_I_H),
> >>> +};
> >>> +
> >>> +static int axp20x_adc_raw(struct iio_dev *indio_dev,
> >>> +			  struct iio_chan_spec const *chan, int *val)
> >>> +{
> >>> +	struct axp20x_adc_iio *info = iio_priv(indio_dev);
> >>> +	int size = 12;
> >>> +
> >>> +	/*
> >>> +	 * N.B.:  Unlike the Chinese datasheets tell, the charging current is
> >>> +	 * stored on 12 bits, not 13 bits. Only discharging current is on 13
> >>> +	 * bits.
> >>> +	 */
> >>> +	if (chan->type == IIO_CURRENT && chan->channel == AXP20X_BATT_DISCHRG_I)
> >>> +		size = 13;
> >>> +	else
> >>> +		size = 12;
> >>> +
> >>> +	*val = axp20x_read_variable_width(info->regmap, chan->address, size);
> >>> +	if (*val < 0)
> >>> +		return *val;
> >>> +
> >>> +	return IIO_VAL_INT;
> >>> +}
> >>> +
> >>> +static int axp22x_adc_raw(struct iio_dev *indio_dev,
> >>> +			  struct iio_chan_spec const *chan, int *val)
> >>> +{
> >>> +	struct axp20x_adc_iio *info = iio_priv(indio_dev);
> >>> +	int size;
> >>> +
> >>> +	/*
> >>> +	 * N.B.: Unlike the Chinese datasheets tell, the charging current is
> >>> +	 * stored on 12 bits, not 13 bits. Only discharging current is on 13
> >>> +	 * bits.
> >>> +	 */
> >>> +	if (chan->type == IIO_CURRENT && chan->channel == AXP22X_BATT_DISCHRG_I)
> >>> +		size = 13;
> >>> +	else
> >>> +		size = 12;
> >>> +
> >>> +	*val = axp20x_read_variable_width(info->regmap, chan->address, size);
> >>> +	if (*val < 0)
> >>> +		return *val;
> >>> +
> >>> +	return IIO_VAL_INT;
> >>> +}
> >>> +
> >>> +static int axp20x_adc_scale_voltage(int channel, int *val, int *val2)
> >>> +{
> >>> +	switch (channel) {
> >>> +	case AXP20X_ACIN_V:
> >>> +	case AXP20X_VBUS_V:
> >>> +		*val = 1;
> >>> +		*val2 = 700000;
> >>> +		return IIO_VAL_INT_PLUS_MICRO;
> >>> +
> >>> +	case AXP20X_GPIO0_V:
> >>> +	case AXP20X_GPIO1_V:
> >>> +		*val = 0;
> >>> +		*val2 = 500000;
> >>> +		return IIO_VAL_INT_PLUS_MICRO;
> >>> +
> >>> +	case AXP20X_BATT_V:
> >>> +		*val = 1;
> >>> +		*val2 = 100000;
> >>> +		return IIO_VAL_INT_PLUS_MICRO;
> >>> +
> >>> +	case AXP20X_IPSOUT_V:
> >>> +		*val = 1;
> >>> +		*val2 = 400000;
> >>> +		return IIO_VAL_INT_PLUS_MICRO;
> >>> +
> >>> +	default:
> >>> +		return -EINVAL;
> >>> +	}
> >>> +}
> >>> +
> >>> +static int axp20x_adc_scale_current(int channel, int *val, int *val2)
> >>> +{
> >>> +	switch (channel) {
> >>> +	case AXP20X_ACIN_I:
> >>> +		*val = 0;
> >>> +		*val2 = 625000;
> >>> +		return IIO_VAL_INT_PLUS_MICRO;
> >>> +
> >>> +	case AXP20X_VBUS_I:
> >>> +		*val = 0;
> >>> +		*val2 = 375000;
> >>> +		return IIO_VAL_INT_PLUS_MICRO;
> >>> +
> >>> +	case AXP20X_BATT_DISCHRG_I:
> >>> +	case AXP20X_BATT_CHRG_I:
> >>> +		*val = 0;
> >>> +		*val2 = 500000;
> >>> +		return IIO_VAL_INT_PLUS_MICRO;
> >>> +
> >>> +	default:
> >>> +		return -EINVAL;
> >>> +	}
> >>> +}
> >>> +
> >>> +static int axp20x_adc_scale(struct iio_chan_spec const *chan, int *val,
> >>> +			    int *val2)
> >>> +{
> >>> +	switch (chan->type) {
> >>> +	case IIO_VOLTAGE:
> >>> +		return axp20x_adc_scale_voltage(chan->channel, val, val2);
> >>> +
> >>> +	case IIO_CURRENT:
> >>> +		return axp20x_adc_scale_current(chan->channel, val, val2);
> >>> +
> >>> +	case IIO_TEMP:
> >>> +		*val = 100;
> >>> +		return IIO_VAL_INT;
> >>> +
> >>> +	default:
> >>> +		return -EINVAL;
> >>> +	}
> >>> +}
> >>> +
> >>> +static int axp22x_adc_scale(struct iio_chan_spec const *chan, int *val,
> >>> +			    int *val2)
> >>> +{
> >>> +	switch (chan->type) {
> >>> +	case IIO_VOLTAGE:
> >>> +		if (chan->channel != AXP22X_BATT_V)
> >>> +			return -EINVAL;
> >>> +
> >>> +		*val = 1;
> >>> +		*val2 = 100000;
> >>> +		return IIO_VAL_INT_PLUS_MICRO;
> >>> +
> >>> +	case IIO_CURRENT:
> >>> +		*val = 0;
> >>> +		*val2 = 500000;
> >>> +		return IIO_VAL_INT_PLUS_MICRO;
> >>> +
> >>> +	case IIO_TEMP:
> >>> +		*val = 100;
> >>> +		return IIO_VAL_INT;
> >>> +
> >>> +	default:
> >>> +		return -EINVAL;
> >>> +	}
> >>> +}
> >>> +
> >>> +static int axp20x_adc_offset_voltage(struct iio_dev *indio_dev, int channel,
> >>> +				     int *val)
> >>> +{
> >>> +	struct axp20x_adc_iio *info = iio_priv(indio_dev);
> >>> +	int ret;
> >>> +
> >>> +	ret = regmap_read(info->regmap, AXP20X_GPIO10_IN_RANGE, val);
> >>> +	if (ret < 0)
> >>> +		return ret;
> >>> +
> >>> +	switch (channel) {
> >>> +	case AXP20X_GPIO0_V:
> >>> +		*val &= AXP20X_GPIO10_IN_RANGE_GPIO0;
> >>> +		break;
> >>> +
> >>> +	case AXP20X_GPIO1_V:
> >>> +		*val &= AXP20X_GPIO10_IN_RANGE_GPIO1;
> >>> +		break;
> >>> +
> >>> +	default:
> >>> +		return -EINVAL;
> >>> +	}
> >>> +
> >>> +	*val = !!(*val) * 700000;
> >>> +
> >>> +	return IIO_VAL_INT;
> >>> +}
> >>> +
> >>> +static int axp20x_adc_offset(struct iio_dev *indio_dev,
> >>> +			     struct iio_chan_spec const *chan, int *val)
> >>> +{
> >>> +	switch (chan->type) {
> >>> +	case IIO_VOLTAGE:
> >>> +		return axp20x_adc_offset_voltage(indio_dev, chan->channel, val);
> >>> +
> >>> +	case IIO_TEMP:
> >>> +		*val = -1447;
> >>> +		return IIO_VAL_INT;
> >>> +
> >>> +	default:
> >>> +		return -EINVAL;
> >>> +	}
> >>> +}
> >>> +
> >>> +static int axp20x_read_raw(struct iio_dev *indio_dev,
> >>> +			   struct iio_chan_spec const *chan, int *val,
> >>> +			   int *val2, long mask)
> >>> +{
> >>> +	switch (mask) {
> >>> +	case IIO_CHAN_INFO_OFFSET:
> >>> +		return axp20x_adc_offset(indio_dev, chan, val);
> >>> +
> >>> +	case IIO_CHAN_INFO_SCALE:
> >>> +		return axp20x_adc_scale(chan, val, val2);
> >>> +
> >>> +	case IIO_CHAN_INFO_RAW:
> >>> +		return axp20x_adc_raw(indio_dev, chan, val);
> >>> +
> >>> +	default:
> >>> +		return -EINVAL;
> >>> +	}
> >>> +}
> >>> +
> >>> +static int axp22x_read_raw(struct iio_dev *indio_dev,
> >>> +			   struct iio_chan_spec const *chan, int *val,
> >>> +			   int *val2, long mask)
> >>> +{
> >>> +	switch (mask) {
> >>> +	case IIO_CHAN_INFO_OFFSET:
> >>> +		*val = -2677;
> >>> +		return IIO_VAL_INT;
> >>> +
> >>> +	case IIO_CHAN_INFO_SCALE:
> >>> +		return axp22x_adc_scale(chan, val, val2);
> >>> +
> >>> +	case IIO_CHAN_INFO_RAW:
> >>> +		return axp22x_adc_raw(indio_dev, chan, val);
> >>> +
> >>> +	default:
> >>> +		return -EINVAL;
> >>> +	}
> >>> +}
> >>> +
> >>> +static int axp20x_write_raw(struct iio_dev *indio_dev,
> >>> +			    struct iio_chan_spec const *chan, int val, int val2,
> >>> +			    long mask)
> >>> +{
> >>> +	struct axp20x_adc_iio *info = iio_priv(indio_dev);
> >>> +	unsigned int reg, regval;
> >>> +
> >>> +	/*
> >>> +	 * The AXP20X PMIC allows the user to choose between 0V and 0.7V offsets
> >>> +	 * for (independently) GPIO0 and GPIO1 when in ADC mode.
> >>> +	 */
> >>> +	if (mask != IIO_CHAN_INFO_OFFSET)
> >>> +		return -EINVAL;
> >>> +
> >>> +	if (val != 0 && val != 700000)
> >>> +		return -EINVAL;
> >>> +
> >>> +	switch (chan->channel) {
> >>> +	case AXP20X_GPIO0_V:
> >>> +		reg = AXP20X_GPIO10_IN_RANGE_GPIO0;
> >>> +		regval = AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(!!val);
> >>> +		break;
> >>> +
> >>> +	case AXP20X_GPIO1_V:
> >>> +		reg = AXP20X_GPIO10_IN_RANGE_GPIO1;
> >>> +		regval = AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(!!val);
> >>> +		break;
> >>> +
> >>> +	default:
> >>> +		return -EINVAL;
> >>> +	}
> >>> +
> >>> +	return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE, reg,
> >>> +				  regval);
> >>> +}
> >>> +
> >>> +static const struct iio_info axp20x_adc_iio_info = {
> >>> +	.read_raw = axp20x_read_raw,
> >>> +	.write_raw = axp20x_write_raw,
> >>> +	.driver_module = THIS_MODULE,
> >>> +};
> >>> +
> >>> +static const struct iio_info axp22x_adc_iio_info = {
> >>> +	.read_raw = axp22x_read_raw,
> >>> +	.driver_module = THIS_MODULE,
> >>> +};
> >>> +
> >>> +static int axp20x_adc_rate(int rate)
> >>> +{
> >>> +	return AXP20X_ADC_RATE_HZ(rate);
> >>> +}
> >>> +
> >>> +static int axp22x_adc_rate(int rate)
> >>> +{
> >>> +	return AXP22X_ADC_RATE_HZ(rate);
> >>> +}
> >>> +
> >>> +struct axp_data {
> >>> +	const struct iio_info		*iio_info;
> >>> +	int				num_channels;
> >>> +	struct iio_chan_spec const	*channels;
> >>> +	unsigned long			adc_en1_mask;
> >>> +	int				(*adc_rate)(int rate);
> >>> +	bool				adc_en2;
> >>> +	struct iio_map			*maps;
> >>> +};
> >>> +
> >>> +static const struct axp_data axp20x_data = {
> >>> +	.iio_info = &axp20x_adc_iio_info,
> >>> +	.num_channels = ARRAY_SIZE(axp20x_adc_channels),
> >>> +	.channels = axp20x_adc_channels,
> >>> +	.adc_en1_mask = AXP20X_ADC_EN1_MASK,
> >>> +	.adc_rate = axp20x_adc_rate,
> >>> +	.adc_en2 = true,
> >>> +	.maps = axp20x_maps,
> >>> +};
> >>> +
> >>> +static const struct axp_data axp22x_data = {
> >>> +	.iio_info = &axp22x_adc_iio_info,
> >>> +	.num_channels = ARRAY_SIZE(axp22x_adc_channels),
> >>> +	.channels = axp22x_adc_channels,
> >>> +	.adc_en1_mask = AXP22X_ADC_EN1_MASK,
> >>> +	.adc_rate = axp22x_adc_rate,
> >>> +	.adc_en2 = false,
> >>> +	.maps = axp22x_maps,
> >>> +};
> >>> +
> >>> +static const struct platform_device_id axp20x_adc_id_match[] = {
> >>> +	{ .name = "axp20x-adc", .driver_data = (kernel_ulong_t)&axp20x_data, },
> >>> +	{ .name = "axp22x-adc", .driver_data = (kernel_ulong_t)&axp22x_data, },
> >>> +	{ /* sentinel */ },
> >>> +};
> >>> +MODULE_DEVICE_TABLE(platform, axp20x_adc_id_match);
> >>> +
> >>> +static int axp20x_probe(struct platform_device *pdev)
> >>> +{
> >>> +	struct axp20x_adc_iio *info;
> >>> +	struct iio_dev *indio_dev;
> >>> +	struct axp20x_dev *axp20x_dev;
> >>> +	int ret;
> >>> +
> >>> +	axp20x_dev = dev_get_drvdata(pdev->dev.parent);
> >>> +
> >>> +	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
> >>> +	if (!indio_dev)
> >>> +		return -ENOMEM;
> >>> +
> >>> +	info = iio_priv(indio_dev);
> >>> +	platform_set_drvdata(pdev, indio_dev);
> >>> +
> >>> +	info->regmap = axp20x_dev->regmap;
> >>> +	indio_dev->dev.parent = &pdev->dev;
> >>> +	indio_dev->dev.of_node = pdev->dev.of_node;
> >>> +	indio_dev->modes = INDIO_DIRECT_MODE;
> >>> +
> >>> +	info->data = (struct axp_data *)platform_get_device_id(pdev)->driver_data;
> >>> +
> >>> +	indio_dev->name = platform_get_device_id(pdev)->name;
> >>> +	indio_dev->info = info->data->iio_info;
> >>> +	indio_dev->num_channels = info->data->num_channels;
> >>> +	indio_dev->channels = info->data->channels;
> >>> +
> >>> +	/* Enable the ADCs on IP */
> >>> +	regmap_write(info->regmap, AXP20X_ADC_EN1, info->data->adc_en1_mask);
> >>> +
> >>> +	if (info->data->adc_en2)
> >>> +		/* Enable GPIO0/1 and internal temperature ADCs */
> >>> +		regmap_update_bits(info->regmap, AXP20X_ADC_EN2,
> >>> +				   AXP20X_ADC_EN2_MASK, AXP20X_ADC_EN2_MASK);
> >>> +
> >>> +	/* Configure ADCs rate */
> >>> +	regmap_update_bits(info->regmap, AXP20X_ADC_RATE, AXP20X_ADC_RATE_MASK,
> >>> +			   info->data->adc_rate(100));
> >>> +
> >>> +	ret = iio_map_array_register(indio_dev, info->data->maps);
> >>> +	if (ret < 0) {
> >>> +		dev_err(&pdev->dev, "failed to register IIO maps: %d\n", ret);
> >>> +		goto fail_map;
> >>> +	}
> >>> +
> >>> +	ret = iio_device_register(indio_dev);
> >>> +	if (ret < 0) {
> >>> +		dev_err(&pdev->dev, "could not register the device\n");
> >>> +		goto fail_register;
> >>> +	}
> >>> +
> >>> +	return 0;
> >>> +
> >>> +fail_register:
> >>> +	iio_map_array_unregister(indio_dev);
> >>> +
> >>> +fail_map:
> >>> +	regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
> >>> +
> >>> +	if (info->data->adc_en2)
> >>> +		regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
> >>> +
> >>> +	return ret;
> >>> +}
> >>> +
> >>> +static int axp20x_remove(struct platform_device *pdev)
> >>> +{
> >>> +	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> >>> +	struct axp20x_adc_iio *info = iio_priv(indio_dev);
> >>> +
> >>> +	iio_device_unregister(indio_dev);
> >>> +	iio_map_array_unregister(indio_dev);
> >>> +
> >>> +	regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
> >>> +
> >>> +	if (info->data->adc_en2)
> >>> +		regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
> >>> +
> >>> +	return 0;
> >>> +}
> >>> +
> >>> +static struct platform_driver axp20x_adc_driver = {
> >>> +	.driver = {
> >>> +		.name = "axp20x-adc",
> >>> +	},
> >>> +	.id_table = axp20x_adc_id_match,
> >>> +	.probe = axp20x_probe,
> >>> +	.remove = axp20x_remove,
> >>> +};
> >>> +
> >>> +module_platform_driver(axp20x_adc_driver);
> >>> +
> >>> +MODULE_DESCRIPTION("ADC driver for AXP20X and AXP22X PMICs");
> >>> +MODULE_AUTHOR("Quentin Schulz <quentin.schulz at free-electrons.com>");
> >>> +MODULE_LICENSE("GPL");
> >>>
> >>
> > 
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog



More information about the linux-arm-kernel mailing list