[RESEND PATCH v4] iio: adc: add support for X-Powers AXP20X and AXP22X PMICs ADCs
Quentin Schulz
quentin.schulz at free-electrons.com
Tue Apr 11 00:29:46 PDT 2017
Hi Lee,
On 10/04/2017 16:54, Lee Jones wrote:
> On Mon, 10 Apr 2017, Quentin Schulz wrote:
>
>> Hi Lee,
>>
>> Just to make sure you didn't miss that patch (can't find it in
>> for-mfd-next and for-mfd-next-next).
>
> It has not been missed, but is yet to be reviewed.
>
Hum.. What do you mean exactly? The maintainer of the AXP PMICs has
given its Acked-by and the maintainer of the IIO subsystem has given its
Reviewed-by. Is there something I'm missing (in your workflow maybe)?
Thanks,
Quentin
>> On 04/04/2017 08:34, Quentin Schulz wrote:
>>> The X-Powers AXP20X and AXP22X PMICs have multiple ADCs. They expose the
>>> battery voltage, battery charge and discharge currents, AC-in and VBUS
>>> voltages and currents, 2 GPIOs muxable in ADC mode and PMIC temperature.
>>>
>>> This adds support for most of AXP20X and AXP22X ADCs.
>>>
>>> Signed-off-by: Quentin Schulz <quentin.schulz at free-electrons.com>
>>> Acked-by: Maxime Ripard <maxime.ripard at free-electrons.com>
>>> Acked-by: Chen-Yu Tsai <wens at csie.org>
>>> Reviewed-by: Jonathan Cameron <jic23 at kernel.org>
>>> ---
>>>
>>> Lee, could you merge this through the mfd tree please?
>>> => https://lkml.org/lkml/2017/3/22/47
>>>
>>> v4:
>>> - added missing space at the beginning of a comment,
>>> - tidied axp20x_adc_offset_voltage and axp20x_write_raw to use switch case
>>> instead of if conditions,
>>> - added MODULE_DEVICE_TABLE for axp20x_adc_id_match for module autoloading,
>>> - merged two lines in axp20x_remove,
>>>
>>> v3:
>>> - moved from switch to if condition in axp20x_adc_raw and
>>> axp22x_adc_raw,
>>> - removed DT support as DT node has been dropped,
>>> - use of platform_device_id
>>> - correctly defined the name of the iio device (name used to probe the
>>> driver),
>>> - added goto for errors in probe,
>>> - added iio_map_array_unregister to the remove function,
>>>
>>> v2:
>>> - removed unused defines,
>>> - changed BIT(x) to 1 << x when describing bits purpose for which 2 <<
>>> x or 3 << x exists, to be consistent,
>>> - changed ADC rate defines to macro formulas,
>>> - reordered IIO channels, now different measures (current/voltage) of
>>> the same part of the PMIC (e.g. battery), have the same IIO channel in
>>> their respective IIO type. When a part of the PMIC have only one
>>> measure, a number is jumped,
>>> - left IIO channel mapping in DT to use iio_map structure,
>>> - removed indexing of ADC internal temperature,
>>> - removed unused iio_dev structure in axp20x_adc_iio,
>>> - added a structure for data specific to AXP20X or AXP22X PMICs instead
>>> of using an ID and an if condition when needing to separate the
>>> behaviour of both,
>>> - added a comment on batt_chrg_i really being on 12bits rather than
>>> what the Chinese datasheets say (13 bits),
>>> - corrected the offset for AXP22X PMIC temperature,
>>> - set the ADC rate to a value (100Hz) shared by the AXP20X and AXP22X,
>>> - created macro formulas to compute the ADC rate for each,
>>> - added a condition on presence of ADC_EN2 reg before setting/resetting
>>> it,
>>> - switched from devm_iio_device_unregister to the non-devm function
>>> because of the need for a remove function,
>>> - removed some dead code,
>>>
>>> drivers/iio/adc/Kconfig | 10 +
>>> drivers/iio/adc/Makefile | 1 +
>>> drivers/iio/adc/axp20x_adc.c | 617 +++++++++++++++++++++++++++++++++++++++++++
>>> 3 files changed, 628 insertions(+)
>>> create mode 100644 drivers/iio/adc/axp20x_adc.c
>>>
>>> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
>>> index d777a97..d15e1bd 100644
>>> --- a/drivers/iio/adc/Kconfig
>>> +++ b/drivers/iio/adc/Kconfig
>>> @@ -154,6 +154,16 @@ config AT91_SAMA5D2_ADC
>>> To compile this driver as a module, choose M here: the module will be
>>> called at91-sama5d2_adc.
>>>
>>> +config AXP20X_ADC
>>> + tristate "X-Powers AXP20X and AXP22X ADC driver"
>>> + depends on MFD_AXP20X
>>> + help
>>> + Say yes here to have support for X-Powers power management IC (PMIC)
>>> + AXP20X and AXP22X ADC devices.
>>> +
>>> + To compile this driver as a module, choose M here: the module will be
>>> + called axp20x_adc.
>>> +
>>> config AXP288_ADC
>>> tristate "X-Powers AXP288 ADC driver"
>>> depends on MFD_AXP20X
>>> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
>>> index b11bb57..17899b5 100644
>>> --- a/drivers/iio/adc/Makefile
>>> +++ b/drivers/iio/adc/Makefile
>>> @@ -16,6 +16,7 @@ obj-$(CONFIG_AD7887) += ad7887.o
>>> obj-$(CONFIG_AD799X) += ad799x.o
>>> obj-$(CONFIG_AT91_ADC) += at91_adc.o
>>> obj-$(CONFIG_AT91_SAMA5D2_ADC) += at91-sama5d2_adc.o
>>> +obj-$(CONFIG_AXP20X_ADC) += axp20x_adc.o
>>> obj-$(CONFIG_AXP288_ADC) += axp288_adc.o
>>> obj-$(CONFIG_BCM_IPROC_ADC) += bcm_iproc_adc.o
>>> obj-$(CONFIG_BERLIN2_ADC) += berlin2-adc.o
>>> diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c
>>> new file mode 100644
>>> index 0000000..11e1771
>>> --- /dev/null
>>> +++ b/drivers/iio/adc/axp20x_adc.c
>>> @@ -0,0 +1,617 @@
>>> +/* ADC driver for AXP20X and AXP22X PMICs
>>> + *
>>> + * Copyright (c) 2016 Free Electrons NextThing Co.
>>> + * Quentin Schulz <quentin.schulz at free-electrons.com>
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify it under
>>> + * the terms of the GNU General Public License version 2 as published by the
>>> + * Free Software Foundation.
>>> + */
>>> +
>>> +#include <linux/completion.h>
>>> +#include <linux/interrupt.h>
>>> +#include <linux/io.h>
>>> +#include <linux/module.h>
>>> +#include <linux/of.h>
>>> +#include <linux/of_device.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/pm_runtime.h>
>>> +#include <linux/regmap.h>
>>> +#include <linux/thermal.h>
>>> +
>>> +#include <linux/iio/iio.h>
>>> +#include <linux/iio/driver.h>
>>> +#include <linux/iio/machine.h>
>>> +#include <linux/mfd/axp20x.h>
>>> +
>>> +#define AXP20X_ADC_EN1_MASK GENMASK(7, 0)
>>> +
>>> +#define AXP20X_ADC_EN2_MASK (GENMASK(3, 2) | BIT(7))
>>> +#define AXP22X_ADC_EN1_MASK (GENMASK(7, 5) | BIT(0))
>>> +
>>> +#define AXP20X_GPIO10_IN_RANGE_GPIO0 BIT(0)
>>> +#define AXP20X_GPIO10_IN_RANGE_GPIO1 BIT(1)
>>> +#define AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(x) ((x) & BIT(0))
>>> +#define AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(x) (((x) & BIT(0)) << 1)
>>> +
>>> +#define AXP20X_ADC_RATE_MASK GENMASK(7, 6)
>>> +#define AXP20X_ADC_RATE_HZ(x) ((ilog2((x) / 25) << 6) & AXP20X_ADC_RATE_MASK)
>>> +#define AXP22X_ADC_RATE_HZ(x) ((ilog2((x) / 100) << 6) & AXP20X_ADC_RATE_MASK)
>>> +
>>> +#define AXP20X_ADC_CHANNEL(_channel, _name, _type, _reg) \
>>> + { \
>>> + .type = _type, \
>>> + .indexed = 1, \
>>> + .channel = _channel, \
>>> + .address = _reg, \
>>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
>>> + BIT(IIO_CHAN_INFO_SCALE), \
>>> + .datasheet_name = _name, \
>>> + }
>>> +
>>> +#define AXP20X_ADC_CHANNEL_OFFSET(_channel, _name, _type, _reg) \
>>> + { \
>>> + .type = _type, \
>>> + .indexed = 1, \
>>> + .channel = _channel, \
>>> + .address = _reg, \
>>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
>>> + BIT(IIO_CHAN_INFO_SCALE) |\
>>> + BIT(IIO_CHAN_INFO_OFFSET),\
>>> + .datasheet_name = _name, \
>>> + }
>>> +
>>> +struct axp_data;
>>> +
>>> +struct axp20x_adc_iio {
>>> + struct regmap *regmap;
>>> + struct axp_data *data;
>>> +};
>>> +
>>> +enum axp20x_adc_channel_v {
>>> + AXP20X_ACIN_V = 0,
>>> + AXP20X_VBUS_V,
>>> + AXP20X_TS_IN,
>>> + AXP20X_GPIO0_V,
>>> + AXP20X_GPIO1_V,
>>> + AXP20X_IPSOUT_V,
>>> + AXP20X_BATT_V,
>>> +};
>>> +
>>> +enum axp20x_adc_channel_i {
>>> + AXP20X_ACIN_I = 0,
>>> + AXP20X_VBUS_I,
>>> + AXP20X_BATT_CHRG_I,
>>> + AXP20X_BATT_DISCHRG_I,
>>> +};
>>> +
>>> +enum axp22x_adc_channel_v {
>>> + AXP22X_TS_IN = 0,
>>> + AXP22X_BATT_V,
>>> +};
>>> +
>>> +enum axp22x_adc_channel_i {
>>> + AXP22X_BATT_CHRG_I = 1,
>>> + AXP22X_BATT_DISCHRG_I,
>>> +};
>>> +
>>> +static struct iio_map axp20x_maps[] = {
>>> + {
>>> + .consumer_dev_name = "axp20x-usb-power-supply",
>>> + .consumer_channel = "vbus_v",
>>> + .adc_channel_label = "vbus_v",
>>> + }, {
>>> + .consumer_dev_name = "axp20x-usb-power-supply",
>>> + .consumer_channel = "vbus_i",
>>> + .adc_channel_label = "vbus_i",
>>> + }, {
>>> + .consumer_dev_name = "axp20x-ac-power-supply",
>>> + .consumer_channel = "acin_v",
>>> + .adc_channel_label = "acin_v",
>>> + }, {
>>> + .consumer_dev_name = "axp20x-ac-power-supply",
>>> + .consumer_channel = "acin_i",
>>> + .adc_channel_label = "acin_i",
>>> + }, {
>>> + .consumer_dev_name = "axp20x-battery-power-supply",
>>> + .consumer_channel = "batt_v",
>>> + .adc_channel_label = "batt_v",
>>> + }, {
>>> + .consumer_dev_name = "axp20x-battery-power-supply",
>>> + .consumer_channel = "batt_chrg_i",
>>> + .adc_channel_label = "batt_chrg_i",
>>> + }, {
>>> + .consumer_dev_name = "axp20x-battery-power-supply",
>>> + .consumer_channel = "batt_dischrg_i",
>>> + .adc_channel_label = "batt_dischrg_i",
>>> + }, { /* sentinel */ }
>>> +};
>>> +
>>> +static struct iio_map axp22x_maps[] = {
>>> + {
>>> + .consumer_dev_name = "axp20x-battery-power-supply",
>>> + .consumer_channel = "batt_v",
>>> + .adc_channel_label = "batt_v",
>>> + }, {
>>> + .consumer_dev_name = "axp20x-battery-power-supply",
>>> + .consumer_channel = "batt_chrg_i",
>>> + .adc_channel_label = "batt_chrg_i",
>>> + }, {
>>> + .consumer_dev_name = "axp20x-battery-power-supply",
>>> + .consumer_channel = "batt_dischrg_i",
>>> + .adc_channel_label = "batt_dischrg_i",
>>> + }, { /* sentinel */ }
>>> +};
>>> +
>>> +/*
>>> + * Channels are mapped by physical system. Their channels share the same index.
>>> + * i.e. acin_i is in_current0_raw and acin_v is in_voltage0_raw.
>>> + * The only exception is for the battery. batt_v will be in_voltage6_raw and
>>> + * charge current in_current6_raw and discharge current will be in_current7_raw.
>>> + */
>>> +static const struct iio_chan_spec axp20x_adc_channels[] = {
>>> + AXP20X_ADC_CHANNEL(AXP20X_ACIN_V, "acin_v", IIO_VOLTAGE,
>>> + AXP20X_ACIN_V_ADC_H),
>>> + AXP20X_ADC_CHANNEL(AXP20X_ACIN_I, "acin_i", IIO_CURRENT,
>>> + AXP20X_ACIN_I_ADC_H),
>>> + AXP20X_ADC_CHANNEL(AXP20X_VBUS_V, "vbus_v", IIO_VOLTAGE,
>>> + AXP20X_VBUS_V_ADC_H),
>>> + AXP20X_ADC_CHANNEL(AXP20X_VBUS_I, "vbus_i", IIO_CURRENT,
>>> + AXP20X_VBUS_I_ADC_H),
>>> + {
>>> + .type = IIO_TEMP,
>>> + .address = AXP20X_TEMP_ADC_H,
>>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
>>> + BIT(IIO_CHAN_INFO_SCALE) |
>>> + BIT(IIO_CHAN_INFO_OFFSET),
>>> + .datasheet_name = "pmic_temp",
>>> + },
>>> + AXP20X_ADC_CHANNEL_OFFSET(AXP20X_GPIO0_V, "gpio0_v", IIO_VOLTAGE,
>>> + AXP20X_GPIO0_V_ADC_H),
>>> + AXP20X_ADC_CHANNEL_OFFSET(AXP20X_GPIO1_V, "gpio1_v", IIO_VOLTAGE,
>>> + AXP20X_GPIO1_V_ADC_H),
>>> + AXP20X_ADC_CHANNEL(AXP20X_IPSOUT_V, "ipsout_v", IIO_VOLTAGE,
>>> + AXP20X_IPSOUT_V_HIGH_H),
>>> + AXP20X_ADC_CHANNEL(AXP20X_BATT_V, "batt_v", IIO_VOLTAGE,
>>> + AXP20X_BATT_V_H),
>>> + AXP20X_ADC_CHANNEL(AXP20X_BATT_CHRG_I, "batt_chrg_i", IIO_CURRENT,
>>> + AXP20X_BATT_CHRG_I_H),
>>> + AXP20X_ADC_CHANNEL(AXP20X_BATT_DISCHRG_I, "batt_dischrg_i", IIO_CURRENT,
>>> + AXP20X_BATT_DISCHRG_I_H),
>>> +};
>>> +
>>> +static const struct iio_chan_spec axp22x_adc_channels[] = {
>>> + {
>>> + .type = IIO_TEMP,
>>> + .address = AXP22X_PMIC_TEMP_H,
>>> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
>>> + BIT(IIO_CHAN_INFO_SCALE) |
>>> + BIT(IIO_CHAN_INFO_OFFSET),
>>> + .datasheet_name = "pmic_temp",
>>> + },
>>> + AXP20X_ADC_CHANNEL(AXP22X_BATT_V, "batt_v", IIO_VOLTAGE,
>>> + AXP20X_BATT_V_H),
>>> + AXP20X_ADC_CHANNEL(AXP22X_BATT_CHRG_I, "batt_chrg_i", IIO_CURRENT,
>>> + AXP20X_BATT_CHRG_I_H),
>>> + AXP20X_ADC_CHANNEL(AXP22X_BATT_DISCHRG_I, "batt_dischrg_i", IIO_CURRENT,
>>> + AXP20X_BATT_DISCHRG_I_H),
>>> +};
>>> +
>>> +static int axp20x_adc_raw(struct iio_dev *indio_dev,
>>> + struct iio_chan_spec const *chan, int *val)
>>> +{
>>> + struct axp20x_adc_iio *info = iio_priv(indio_dev);
>>> + int size = 12;
>>> +
>>> + /*
>>> + * N.B.: Unlike the Chinese datasheets tell, the charging current is
>>> + * stored on 12 bits, not 13 bits. Only discharging current is on 13
>>> + * bits.
>>> + */
>>> + if (chan->type == IIO_CURRENT && chan->channel == AXP20X_BATT_DISCHRG_I)
>>> + size = 13;
>>> + else
>>> + size = 12;
>>> +
>>> + *val = axp20x_read_variable_width(info->regmap, chan->address, size);
>>> + if (*val < 0)
>>> + return *val;
>>> +
>>> + return IIO_VAL_INT;
>>> +}
>>> +
>>> +static int axp22x_adc_raw(struct iio_dev *indio_dev,
>>> + struct iio_chan_spec const *chan, int *val)
>>> +{
>>> + struct axp20x_adc_iio *info = iio_priv(indio_dev);
>>> + int size;
>>> +
>>> + /*
>>> + * N.B.: Unlike the Chinese datasheets tell, the charging current is
>>> + * stored on 12 bits, not 13 bits. Only discharging current is on 13
>>> + * bits.
>>> + */
>>> + if (chan->type == IIO_CURRENT && chan->channel == AXP22X_BATT_DISCHRG_I)
>>> + size = 13;
>>> + else
>>> + size = 12;
>>> +
>>> + *val = axp20x_read_variable_width(info->regmap, chan->address, size);
>>> + if (*val < 0)
>>> + return *val;
>>> +
>>> + return IIO_VAL_INT;
>>> +}
>>> +
>>> +static int axp20x_adc_scale_voltage(int channel, int *val, int *val2)
>>> +{
>>> + switch (channel) {
>>> + case AXP20X_ACIN_V:
>>> + case AXP20X_VBUS_V:
>>> + *val = 1;
>>> + *val2 = 700000;
>>> + return IIO_VAL_INT_PLUS_MICRO;
>>> +
>>> + case AXP20X_GPIO0_V:
>>> + case AXP20X_GPIO1_V:
>>> + *val = 0;
>>> + *val2 = 500000;
>>> + return IIO_VAL_INT_PLUS_MICRO;
>>> +
>>> + case AXP20X_BATT_V:
>>> + *val = 1;
>>> + *val2 = 100000;
>>> + return IIO_VAL_INT_PLUS_MICRO;
>>> +
>>> + case AXP20X_IPSOUT_V:
>>> + *val = 1;
>>> + *val2 = 400000;
>>> + return IIO_VAL_INT_PLUS_MICRO;
>>> +
>>> + default:
>>> + return -EINVAL;
>>> + }
>>> +}
>>> +
>>> +static int axp20x_adc_scale_current(int channel, int *val, int *val2)
>>> +{
>>> + switch (channel) {
>>> + case AXP20X_ACIN_I:
>>> + *val = 0;
>>> + *val2 = 625000;
>>> + return IIO_VAL_INT_PLUS_MICRO;
>>> +
>>> + case AXP20X_VBUS_I:
>>> + *val = 0;
>>> + *val2 = 375000;
>>> + return IIO_VAL_INT_PLUS_MICRO;
>>> +
>>> + case AXP20X_BATT_DISCHRG_I:
>>> + case AXP20X_BATT_CHRG_I:
>>> + *val = 0;
>>> + *val2 = 500000;
>>> + return IIO_VAL_INT_PLUS_MICRO;
>>> +
>>> + default:
>>> + return -EINVAL;
>>> + }
>>> +}
>>> +
>>> +static int axp20x_adc_scale(struct iio_chan_spec const *chan, int *val,
>>> + int *val2)
>>> +{
>>> + switch (chan->type) {
>>> + case IIO_VOLTAGE:
>>> + return axp20x_adc_scale_voltage(chan->channel, val, val2);
>>> +
>>> + case IIO_CURRENT:
>>> + return axp20x_adc_scale_current(chan->channel, val, val2);
>>> +
>>> + case IIO_TEMP:
>>> + *val = 100;
>>> + return IIO_VAL_INT;
>>> +
>>> + default:
>>> + return -EINVAL;
>>> + }
>>> +}
>>> +
>>> +static int axp22x_adc_scale(struct iio_chan_spec const *chan, int *val,
>>> + int *val2)
>>> +{
>>> + switch (chan->type) {
>>> + case IIO_VOLTAGE:
>>> + if (chan->channel != AXP22X_BATT_V)
>>> + return -EINVAL;
>>> +
>>> + *val = 1;
>>> + *val2 = 100000;
>>> + return IIO_VAL_INT_PLUS_MICRO;
>>> +
>>> + case IIO_CURRENT:
>>> + *val = 0;
>>> + *val2 = 500000;
>>> + return IIO_VAL_INT_PLUS_MICRO;
>>> +
>>> + case IIO_TEMP:
>>> + *val = 100;
>>> + return IIO_VAL_INT;
>>> +
>>> + default:
>>> + return -EINVAL;
>>> + }
>>> +}
>>> +
>>> +static int axp20x_adc_offset_voltage(struct iio_dev *indio_dev, int channel,
>>> + int *val)
>>> +{
>>> + struct axp20x_adc_iio *info = iio_priv(indio_dev);
>>> + int ret;
>>> +
>>> + ret = regmap_read(info->regmap, AXP20X_GPIO10_IN_RANGE, val);
>>> + if (ret < 0)
>>> + return ret;
>>> +
>>> + switch (channel) {
>>> + case AXP20X_GPIO0_V:
>>> + *val &= AXP20X_GPIO10_IN_RANGE_GPIO0;
>>> + break;
>>> +
>>> + case AXP20X_GPIO1_V:
>>> + *val &= AXP20X_GPIO10_IN_RANGE_GPIO1;
>>> + break;
>>> +
>>> + default:
>>> + return -EINVAL;
>>> + }
>>> +
>>> + *val = !!(*val) * 700000;
>>> +
>>> + return IIO_VAL_INT;
>>> +}
>>> +
>>> +static int axp20x_adc_offset(struct iio_dev *indio_dev,
>>> + struct iio_chan_spec const *chan, int *val)
>>> +{
>>> + switch (chan->type) {
>>> + case IIO_VOLTAGE:
>>> + return axp20x_adc_offset_voltage(indio_dev, chan->channel, val);
>>> +
>>> + case IIO_TEMP:
>>> + *val = -1447;
>>> + return IIO_VAL_INT;
>>> +
>>> + default:
>>> + return -EINVAL;
>>> + }
>>> +}
>>> +
>>> +static int axp20x_read_raw(struct iio_dev *indio_dev,
>>> + struct iio_chan_spec const *chan, int *val,
>>> + int *val2, long mask)
>>> +{
>>> + switch (mask) {
>>> + case IIO_CHAN_INFO_OFFSET:
>>> + return axp20x_adc_offset(indio_dev, chan, val);
>>> +
>>> + case IIO_CHAN_INFO_SCALE:
>>> + return axp20x_adc_scale(chan, val, val2);
>>> +
>>> + case IIO_CHAN_INFO_RAW:
>>> + return axp20x_adc_raw(indio_dev, chan, val);
>>> +
>>> + default:
>>> + return -EINVAL;
>>> + }
>>> +}
>>> +
>>> +static int axp22x_read_raw(struct iio_dev *indio_dev,
>>> + struct iio_chan_spec const *chan, int *val,
>>> + int *val2, long mask)
>>> +{
>>> + switch (mask) {
>>> + case IIO_CHAN_INFO_OFFSET:
>>> + *val = -2677;
>>> + return IIO_VAL_INT;
>>> +
>>> + case IIO_CHAN_INFO_SCALE:
>>> + return axp22x_adc_scale(chan, val, val2);
>>> +
>>> + case IIO_CHAN_INFO_RAW:
>>> + return axp22x_adc_raw(indio_dev, chan, val);
>>> +
>>> + default:
>>> + return -EINVAL;
>>> + }
>>> +}
>>> +
>>> +static int axp20x_write_raw(struct iio_dev *indio_dev,
>>> + struct iio_chan_spec const *chan, int val, int val2,
>>> + long mask)
>>> +{
>>> + struct axp20x_adc_iio *info = iio_priv(indio_dev);
>>> + unsigned int reg, regval;
>>> +
>>> + /*
>>> + * The AXP20X PMIC allows the user to choose between 0V and 0.7V offsets
>>> + * for (independently) GPIO0 and GPIO1 when in ADC mode.
>>> + */
>>> + if (mask != IIO_CHAN_INFO_OFFSET)
>>> + return -EINVAL;
>>> +
>>> + if (val != 0 && val != 700000)
>>> + return -EINVAL;
>>> +
>>> + switch (chan->channel) {
>>> + case AXP20X_GPIO0_V:
>>> + reg = AXP20X_GPIO10_IN_RANGE_GPIO0;
>>> + regval = AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(!!val);
>>> + break;
>>> +
>>> + case AXP20X_GPIO1_V:
>>> + reg = AXP20X_GPIO10_IN_RANGE_GPIO1;
>>> + regval = AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(!!val);
>>> + break;
>>> +
>>> + default:
>>> + return -EINVAL;
>>> + }
>>> +
>>> + return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE, reg,
>>> + regval);
>>> +}
>>> +
>>> +static const struct iio_info axp20x_adc_iio_info = {
>>> + .read_raw = axp20x_read_raw,
>>> + .write_raw = axp20x_write_raw,
>>> + .driver_module = THIS_MODULE,
>>> +};
>>> +
>>> +static const struct iio_info axp22x_adc_iio_info = {
>>> + .read_raw = axp22x_read_raw,
>>> + .driver_module = THIS_MODULE,
>>> +};
>>> +
>>> +static int axp20x_adc_rate(int rate)
>>> +{
>>> + return AXP20X_ADC_RATE_HZ(rate);
>>> +}
>>> +
>>> +static int axp22x_adc_rate(int rate)
>>> +{
>>> + return AXP22X_ADC_RATE_HZ(rate);
>>> +}
>>> +
>>> +struct axp_data {
>>> + const struct iio_info *iio_info;
>>> + int num_channels;
>>> + struct iio_chan_spec const *channels;
>>> + unsigned long adc_en1_mask;
>>> + int (*adc_rate)(int rate);
>>> + bool adc_en2;
>>> + struct iio_map *maps;
>>> +};
>>> +
>>> +static const struct axp_data axp20x_data = {
>>> + .iio_info = &axp20x_adc_iio_info,
>>> + .num_channels = ARRAY_SIZE(axp20x_adc_channels),
>>> + .channels = axp20x_adc_channels,
>>> + .adc_en1_mask = AXP20X_ADC_EN1_MASK,
>>> + .adc_rate = axp20x_adc_rate,
>>> + .adc_en2 = true,
>>> + .maps = axp20x_maps,
>>> +};
>>> +
>>> +static const struct axp_data axp22x_data = {
>>> + .iio_info = &axp22x_adc_iio_info,
>>> + .num_channels = ARRAY_SIZE(axp22x_adc_channels),
>>> + .channels = axp22x_adc_channels,
>>> + .adc_en1_mask = AXP22X_ADC_EN1_MASK,
>>> + .adc_rate = axp22x_adc_rate,
>>> + .adc_en2 = false,
>>> + .maps = axp22x_maps,
>>> +};
>>> +
>>> +static const struct platform_device_id axp20x_adc_id_match[] = {
>>> + { .name = "axp20x-adc", .driver_data = (kernel_ulong_t)&axp20x_data, },
>>> + { .name = "axp22x-adc", .driver_data = (kernel_ulong_t)&axp22x_data, },
>>> + { /* sentinel */ },
>>> +};
>>> +MODULE_DEVICE_TABLE(platform, axp20x_adc_id_match);
>>> +
>>> +static int axp20x_probe(struct platform_device *pdev)
>>> +{
>>> + struct axp20x_adc_iio *info;
>>> + struct iio_dev *indio_dev;
>>> + struct axp20x_dev *axp20x_dev;
>>> + int ret;
>>> +
>>> + axp20x_dev = dev_get_drvdata(pdev->dev.parent);
>>> +
>>> + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
>>> + if (!indio_dev)
>>> + return -ENOMEM;
>>> +
>>> + info = iio_priv(indio_dev);
>>> + platform_set_drvdata(pdev, indio_dev);
>>> +
>>> + info->regmap = axp20x_dev->regmap;
>>> + indio_dev->dev.parent = &pdev->dev;
>>> + indio_dev->dev.of_node = pdev->dev.of_node;
>>> + indio_dev->modes = INDIO_DIRECT_MODE;
>>> +
>>> + info->data = (struct axp_data *)platform_get_device_id(pdev)->driver_data;
>>> +
>>> + indio_dev->name = platform_get_device_id(pdev)->name;
>>> + indio_dev->info = info->data->iio_info;
>>> + indio_dev->num_channels = info->data->num_channels;
>>> + indio_dev->channels = info->data->channels;
>>> +
>>> + /* Enable the ADCs on IP */
>>> + regmap_write(info->regmap, AXP20X_ADC_EN1, info->data->adc_en1_mask);
>>> +
>>> + if (info->data->adc_en2)
>>> + /* Enable GPIO0/1 and internal temperature ADCs */
>>> + regmap_update_bits(info->regmap, AXP20X_ADC_EN2,
>>> + AXP20X_ADC_EN2_MASK, AXP20X_ADC_EN2_MASK);
>>> +
>>> + /* Configure ADCs rate */
>>> + regmap_update_bits(info->regmap, AXP20X_ADC_RATE, AXP20X_ADC_RATE_MASK,
>>> + info->data->adc_rate(100));
>>> +
>>> + ret = iio_map_array_register(indio_dev, info->data->maps);
>>> + if (ret < 0) {
>>> + dev_err(&pdev->dev, "failed to register IIO maps: %d\n", ret);
>>> + goto fail_map;
>>> + }
>>> +
>>> + ret = iio_device_register(indio_dev);
>>> + if (ret < 0) {
>>> + dev_err(&pdev->dev, "could not register the device\n");
>>> + goto fail_register;
>>> + }
>>> +
>>> + return 0;
>>> +
>>> +fail_register:
>>> + iio_map_array_unregister(indio_dev);
>>> +
>>> +fail_map:
>>> + regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
>>> +
>>> + if (info->data->adc_en2)
>>> + regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static int axp20x_remove(struct platform_device *pdev)
>>> +{
>>> + struct iio_dev *indio_dev = platform_get_drvdata(pdev);
>>> + struct axp20x_adc_iio *info = iio_priv(indio_dev);
>>> +
>>> + iio_device_unregister(indio_dev);
>>> + iio_map_array_unregister(indio_dev);
>>> +
>>> + regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
>>> +
>>> + if (info->data->adc_en2)
>>> + regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static struct platform_driver axp20x_adc_driver = {
>>> + .driver = {
>>> + .name = "axp20x-adc",
>>> + },
>>> + .id_table = axp20x_adc_id_match,
>>> + .probe = axp20x_probe,
>>> + .remove = axp20x_remove,
>>> +};
>>> +
>>> +module_platform_driver(axp20x_adc_driver);
>>> +
>>> +MODULE_DESCRIPTION("ADC driver for AXP20X and AXP22X PMICs");
>>> +MODULE_AUTHOR("Quentin Schulz <quentin.schulz at free-electrons.com>");
>>> +MODULE_LICENSE("GPL");
>>>
>>
>
--
Quentin Schulz, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
More information about the linux-arm-kernel
mailing list