[PATCH v2] arm: dts: zynq: Add MicroZed board support

[Michal Simek]

On 23.9.2016 09:39, Jagan Teki wrote:
> On Fri, Sep 23, 2016 at 11:33 AM, Michal Simek <michal.simek at xilinx.com> wrote:
>> On 22.9.2016 22:59, Sören Brinkmann wrote:
>>> On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote:
>>>> From: Jagan Teki <jteki at openedev.com>
>>>>
>>>> Added basic dts support for MicroZed board.
>>>>
>>>> - UART
>>>> - SDHCI
>>>> - Ethernet
>>>>
>>>> Cc: Soren Brinkmann <soren.brinkmann at xilinx.com>
>>>> Cc: Michal Simek <michal.simek at xilinx.com>
>>>> Signed-off-by: Jagan Teki <jteki at openedev.com>
>>>> ---
>>>> Changes for v2:
>>>>      - Add SDHCI
>>>>      - Add Ethernet
>>>>
>>>>  arch/arm/boot/dts/Makefile          |  1 +
>>>>  arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++
>>>>  2 files changed, 96 insertions(+)
>>>>  create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
>>>>
>>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>>> index faacd52..4d7b858 100644
>>>> --- a/arch/arm/boot/dts/Makefile
>>>> +++ b/arch/arm/boot/dts/Makefile
>>>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>>>>      wm8750-apc8750.dtb \
>>>>      wm8850-w70v2.dtb
>>>>  dtb-$(CONFIG_ARCH_ZYNQ) += \
>>>> +    zynq-microzed.dtb \
>>>>      zynq-parallella.dtb \
>>>>      zynq-zc702.dtb \
>>>>      zynq-zc706.dtb \
>>>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
>>>> new file mode 100644
>>>> index 0000000..9e64496
>>>> --- /dev/null
>>>> +++ b/arch/arm/boot/dts/zynq-microzed.dts
>>>> @@ -0,0 +1,95 @@
>>>> +/*
>>>> + * Copyright (C) 2015 Jagan Teki <jteki at openedev.com>
>>
>>
>> Did you created only yourself without copying part of this from others?
>> There is dts in u-boot which I believe you are aware of.
> 
> I sent the initial one few months back so at that time, I was created
> and now I just added USB and Ethernet with the reference of zc702
> board.

Can you send me a link to that post? I didn't find it.
Anyway you should keep Xilinx copyright there.

Thanks,
Michal