[PATCH v2] arm: dts: zynq: Add MicroZed board support
Jagan Teki
jagannadh.teki at gmail.com
Fri Sep 23 00:39:12 PDT 2016
On Fri, Sep 23, 2016 at 11:33 AM, Michal Simek <michal.simek at xilinx.com> wrote:
> On 22.9.2016 22:59, Sören Brinkmann wrote:
>> On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote:
>>> From: Jagan Teki <jteki at openedev.com>
>>>
>>> Added basic dts support for MicroZed board.
>>>
>>> - UART
>>> - SDHCI
>>> - Ethernet
>>>
>>> Cc: Soren Brinkmann <soren.brinkmann at xilinx.com>
>>> Cc: Michal Simek <michal.simek at xilinx.com>
>>> Signed-off-by: Jagan Teki <jteki at openedev.com>
>>> ---
>>> Changes for v2:
>>> - Add SDHCI
>>> - Add Ethernet
>>>
>>> arch/arm/boot/dts/Makefile | 1 +
>>> arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++
>>> 2 files changed, 96 insertions(+)
>>> create mode 100644 arch/arm/boot/dts/zynq-microzed.dts
>>>
>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>> index faacd52..4d7b858 100644
>>> --- a/arch/arm/boot/dts/Makefile
>>> +++ b/arch/arm/boot/dts/Makefile
>>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
>>> wm8750-apc8750.dtb \
>>> wm8850-w70v2.dtb
>>> dtb-$(CONFIG_ARCH_ZYNQ) += \
>>> + zynq-microzed.dtb \
>>> zynq-parallella.dtb \
>>> zynq-zc702.dtb \
>>> zynq-zc706.dtb \
>>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts
>>> new file mode 100644
>>> index 0000000..9e64496
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/zynq-microzed.dts
>>> @@ -0,0 +1,95 @@
>>> +/*
>>> + * Copyright (C) 2015 Jagan Teki <jteki at openedev.com>
>
>
> Did you created only yourself without copying part of this from others?
> There is dts in u-boot which I believe you are aware of.
I sent the initial one few months back so at that time, I was created
and now I just added USB and Ethernet with the reference of zc702
board.
thanks!
--
Jagan.
More information about the linux-arm-kernel
mailing list