[PATCH 2/2] ahci: qoriq: report warning when ecc register is missing

[Mathieu Poirier]

On Wed, Nov 16, 2016 at 11:11:19AM +0800, yuantian.tang at nxp.com wrote:
> From: Tang Yuantian <Yuantian.Tang at nxp.com>
> 
> For ls1021a and ls1046a socs, sata ecc must be disabled.
> If ecc register is not found in sata node in dts, report
> a warning.

Hi Yuantian,

What happens if sata ecc is _not_ disaled on those socs?  Can the driver still
work?  If not then it is probably a better idea to return an error code that can
prevent the driver from initialising.

Thanks,
Mathieu

> 
> Signed-off-by: Tang Yuantian <yuantian.tang at nxp.com>
> ---
>  drivers/ata/ahci_qoriq.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c
> index 45c88de..66eb4b5 100644
> --- a/drivers/ata/ahci_qoriq.c
> +++ b/drivers/ata/ahci_qoriq.c
> @@ -158,6 +158,7 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
>  
>  	switch (qpriv->type) {
>  	case AHCI_LS1021A:
> +		WARN_ON(!qpriv->ecc_addr);
>  		writel(SATA_ECC_DISABLE, qpriv->ecc_addr);
>  		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
>  		writel(LS1021A_PORT_PHY2, reg_base + PORT_PHY2);
> @@ -185,6 +186,7 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
>  		break;
>  
>  	case AHCI_LS1046A:
> +		WARN_ON(!qpriv->ecc_addr);
>  		writel(LS1046A_SATA_ECC_DIS, qpriv->ecc_addr);
>  		writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
>  		writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
> -- 
> 2.1.0.27.g96db324
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel