[PATCH 1/2] USB: ohci: da8xx: Remove ohci platform callbacks
Axel Haslam
ahaslam at baylibre.com
Tue Nov 8 10:57:51 PST 2016
Now that all ohci users are are using a regulator, we can
remove the platform callbacks and data.
potpgt is no longer necessary as a power on delay time can
be specified for the regulator itself.
Signed-off-by: Axel Haslam <ahaslam at baylibre.com>
---
drivers/usb/host/ohci-da8xx.c | 84 ++-----------------------------
include/linux/platform_data/usb-davinci.h | 20 --------
2 files changed, 5 insertions(+), 99 deletions(-)
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index 0a4b885..3dcbf1f 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -89,12 +89,8 @@ static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
- struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
int ret;
- if (hub && hub->set_power)
- return hub->set_power(1, on);
-
if (!da8xx_ohci->vbus_reg)
return 0;
@@ -121,11 +117,6 @@ static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on)
static int ohci_da8xx_get_power(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
- struct device *dev = hcd->self.controller;
- struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
-
- if (hub && hub->get_power)
- return hub->get_power(1);
if (da8xx_ohci->vbus_reg)
return regulator_is_enabled(da8xx_ohci->vbus_reg);
@@ -137,13 +128,9 @@ static int ohci_da8xx_get_oci(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
- struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
unsigned int flags;
int ret;
- if (hub && hub->get_oci)
- return hub->get_oci(1);
-
if (!da8xx_ohci->vbus_reg)
return 0;
@@ -159,29 +146,9 @@ static int ohci_da8xx_get_oci(struct usb_hcd *hcd)
return 0;
}
-static int ohci_da8xx_has_set_power(struct usb_hcd *hcd)
+static int ohci_da8xx_has_regulator(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
- struct device *dev = hcd->self.controller;
- struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
-
- if (hub && hub->set_power)
- return 1;
-
- if (da8xx_ohci->vbus_reg)
- return 1;
-
- return 0;
-}
-
-static int ohci_da8xx_has_oci(struct usb_hcd *hcd)
-{
- struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
- struct device *dev = hcd->self.controller;
- struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
-
- if (hub && hub->get_oci)
- return 1;
if (da8xx_ohci->vbus_reg)
return 1;
@@ -189,30 +156,9 @@ static int ohci_da8xx_has_oci(struct usb_hcd *hcd)
return 0;
}
-static int ohci_da8xx_has_potpgt(struct usb_hcd *hcd)
-{
- struct device *dev = hcd->self.controller;
- struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
-
- if (hub && hub->potpgt)
- return 1;
-
- return 0;
-}
-
/*
* Handle the port over-current indicator change.
*/
-static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub,
- unsigned port)
-{
- ocic_mask |= 1 << port;
-
- /* Once over-current is detected, the port needs to be powered down */
- if (hub->get_oci(port) > 0)
- hub->set_power(port, 0);
-}
-
static int ohci_da8xx_regulator_event(struct notifier_block *nb,
unsigned long event, void *data)
{
@@ -233,12 +179,9 @@ static int ohci_da8xx_register_notify(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
- struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
int ret = 0;
- if (hub && hub->ocic_notify)
- ret = hub->ocic_notify(ohci_da8xx_ocic_handler);
- else if (da8xx_ohci->vbus_reg) {
+ if (da8xx_ohci->vbus_reg) {
da8xx_ohci->nb.notifier_call = ohci_da8xx_regulator_event;
ret = devm_regulator_register_notifier(da8xx_ohci->vbus_reg,
&da8xx_ohci->nb);
@@ -250,19 +193,9 @@ static int ohci_da8xx_register_notify(struct usb_hcd *hcd)
return ret;
}
-static void ohci_da8xx_unregister_notify(struct usb_hcd *hcd)
-{
- struct device *dev = hcd->self.controller;
- struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
-
- if (hub && hub->ocic_notify)
- hub->ocic_notify(NULL);
-}
-
static int ohci_da8xx_reset(struct usb_hcd *hcd)
{
struct device *dev = hcd->self.controller;
- struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int result;
u32 rh_a;
@@ -291,20 +224,14 @@ static int ohci_da8xx_reset(struct usb_hcd *hcd)
* register's default value, so that ohci_hub_control() could return
* the correct hub descriptor...
*/
- rh_a = ohci_readl(ohci, &ohci->regs->roothub.a);
- if (ohci_da8xx_has_set_power(hcd)) {
+ if (ohci_da8xx_has_regulator(hcd)) {
+ rh_a = ohci_readl(ohci, &ohci->regs->roothub.a);
rh_a &= ~RH_A_NPS;
rh_a |= RH_A_PSM;
- }
- if (ohci_da8xx_has_oci(hcd)) {
rh_a &= ~RH_A_NOCP;
rh_a |= RH_A_OCPM;
+ ohci_writel(ohci, rh_a, &ohci->regs->roothub.a);
}
- if (ohci_da8xx_has_potpgt(hcd)) {
- rh_a &= ~RH_A_POTPGT;
- rh_a |= hub->potpgt << 24;
- }
- ohci_writel(ohci, rh_a, &ohci->regs->roothub.a);
return result;
}
@@ -479,7 +406,6 @@ static int ohci_da8xx_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
- ohci_da8xx_unregister_notify(hcd);
usb_remove_hcd(hcd);
usb_put_hcd(hcd);
diff --git a/include/linux/platform_data/usb-davinci.h b/include/linux/platform_data/usb-davinci.h
index 0926e99..58f4be0 100644
--- a/include/linux/platform_data/usb-davinci.h
+++ b/include/linux/platform_data/usb-davinci.h
@@ -11,26 +11,6 @@
#ifndef __ASM_ARCH_USB_H
#define __ASM_ARCH_USB_H
-struct da8xx_ohci_root_hub;
-
-typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub,
- unsigned port);
-
-/* Passed as the platform data to the OHCI driver */
-struct da8xx_ohci_root_hub {
- /* Switch the port power on/off */
- int (*set_power)(unsigned port, int on);
- /* Read the port power status */
- int (*get_power)(unsigned port);
- /* Read the port over-current indicator */
- int (*get_oci)(unsigned port);
- /* Over-current indicator change notification (pass NULL to disable) */
- int (*ocic_notify)(da8xx_ocic_handler_t handler);
-
- /* Time from power on to power good (in 2 ms units) */
- u8 potpgt;
-};
-
void davinci_setup_usb(unsigned mA, unsigned potpgt_ms);
#endif /* ifndef __ASM_ARCH_USB_H */
--
2.10.1
More information about the linux-arm-kernel
mailing list