[PATCH 2/2] USB: ohci: da8xx: use a flag instead of mask for ocic
Axel Haslam
ahaslam at baylibre.com
Tue Nov 8 10:57:52 PST 2016
Now that the platform callback is removed, we can move the over
current indictor changed flag to the private data structure.
Since the driver only handles a single port, there is no need
for ocic to be a mask, we can use a simple flag instead.
Signed-off-by: Axel Haslam <ahaslam at baylibre.com>
---
drivers/usb/host/ohci-da8xx.c | 17 +++++++----------
1 file changed, 7 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index 3dcbf1f..83b182e 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -43,12 +43,10 @@ struct da8xx_ohci_hcd {
struct regulator *vbus_reg;
struct notifier_block nb;
unsigned int is_powered;
+ unsigned int oc_changed;
};
#define to_da8xx_ohci(hcd) (struct da8xx_ohci_hcd *)(hcd_to_ohci(hcd)->priv)
-/* Over-current indicator change bitmask */
-static volatile u16 ocic_mask;
-
static int ohci_da8xx_enable(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
@@ -168,7 +166,7 @@ static int ohci_da8xx_regulator_event(struct notifier_block *nb,
if (event & REGULATOR_EVENT_OVER_CURRENT) {
dev_warn(dev, "over current event\n");
- ocic_mask |= 1;
+ da8xx_ohci->oc_changed = 1;
ohci_da8xx_set_power(da8xx_ohci->hcd, 0);
}
@@ -241,10 +239,11 @@ static int ohci_da8xx_reset(struct usb_hcd *hcd)
*/
static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf)
{
+ struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
int length = orig_ohci_hub_status_data(hcd, buf);
/* See if we have OCIC bit set on port 1 */
- if (ocic_mask & (1 << 1)) {
+ if (da8xx_ohci->oc_changed) {
dev_dbg(hcd->self.controller, "over-current indicator change "
"on port 1\n");
@@ -262,6 +261,7 @@ static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf)
static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
+ struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
int temp;
@@ -284,7 +284,7 @@ static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
temp |= RH_PS_POCI;
/* The over-current indicator change (OCIC) bit is 0 too */
- if (ocic_mask & (1 << wIndex))
+ if (da8xx_ohci->oc_changed)
temp |= RH_PS_OCIC;
put_unaligned(cpu_to_le32(temp), (__le32 *)buf);
@@ -311,10 +311,7 @@ static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
temp ? "Set" : "Clear", wIndex,
"C_OVER_CURRENT");
- if (temp)
- ocic_mask |= 1 << wIndex;
- else
- ocic_mask &= ~(1 << wIndex);
+ da8xx_ohci->oc_changed = temp;
return 0;
}
}
--
2.10.1
More information about the linux-arm-kernel
mailing list