[RESPIN-PATCH v2 1/2] ARM: EXYNOS: Remove static mapping of SCU SFR
Pankaj Dubey
pankaj.dubey at samsung.com
Tue Nov 8 03:19:43 PST 2016
Lets remove static mapping of SCU SFR mainly used in CORTEX-A9 SoC based boards.
Instead use mapping from device tree node of SCU.
Signed-off-by: Pankaj Dubey <pankaj.dubey at samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar at samsung.com>
---
arch/arm/mach-exynos/common.h | 1 +
arch/arm/mach-exynos/exynos.c | 22 ------------------
arch/arm/mach-exynos/include/mach/map.h | 2 --
arch/arm/mach-exynos/platsmp.c | 34 +++++++++++++++++++++-------
arch/arm/mach-exynos/pm.c | 5 ++--
arch/arm/mach-exynos/suspend.c | 13 ++++-------
arch/arm/plat-samsung/include/plat/map-s5p.h | 4 ----
7 files changed, 34 insertions(+), 47 deletions(-)
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 9424a8a..dd5d8e8 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -161,6 +161,7 @@ extern void exynos_cpu_restore_register(void);
extern void exynos_pm_central_suspend(void);
extern int exynos_pm_central_resume(void);
extern void exynos_enter_aftr(void);
+extern int exynos_scu_enable(void);
extern struct cpuidle_exynos_data cpuidle_coupled_exynos_data;
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 757fc11..fa08ef9 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -28,15 +28,6 @@
#include "common.h"
-static struct map_desc exynos4_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_COREPERI_BASE,
- .pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI),
- .length = SZ_8K,
- .type = MT_DEVICE,
- },
-};
-
static struct platform_device exynos_cpuidle = {
.name = "exynos_cpuidle",
#ifdef CONFIG_ARM_EXYNOS_CPUIDLE
@@ -99,17 +90,6 @@ static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
return 1;
}
-/*
- * exynos_map_io
- *
- * register the standard cpu IO areas
- */
-static void __init exynos_map_io(void)
-{
- if (soc_is_exynos4())
- iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
-}
-
static void __init exynos_init_io(void)
{
debug_ll_io_init();
@@ -118,8 +98,6 @@ static void __init exynos_init_io(void)
/* detect cpu id and rev. */
s5p_init_cpu(S5P_VA_CHIPID);
-
- exynos_map_io();
}
/*
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 5fb0040..0eef407 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -18,6 +18,4 @@
#define EXYNOS_PA_CHIPID 0x10000000
-#define EXYNOS4_PA_COREPERI 0x10500000
-
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index a5d6841..94405c7 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -168,6 +168,27 @@ int exynos_cluster_power_state(int cluster)
S5P_CORE_LOCAL_PWR_EN);
}
+/**
+ * exynos_scu_enable : enables SCU for Cortex-A9 based system
+ * returns 0 on success else non-zero error code
+ */
+int exynos_scu_enable(void)
+{
+ struct device_node *np;
+ void __iomem *scu_base;
+
+ np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+ scu_base = of_iomap(np, 0);
+ of_node_put(np);
+ if (!scu_base) {
+ pr_err("%s failed to map scu_base\n", __func__);
+ return -ENOMEM;
+ }
+ scu_enable(scu_base);
+ iounmap(scu_base);
+ return 0;
+}
+
static void __iomem *cpu_boot_reg_base(void)
{
if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_1_1)
@@ -224,11 +245,6 @@ static void write_pen_release(int val)
sync_cache_w(&pen_release);
}
-static void __iomem *scu_base_addr(void)
-{
- return (void __iomem *)(S5P_VA_SCU);
-}
-
static DEFINE_SPINLOCK(boot_lock);
static void exynos_secondary_init(unsigned int cpu)
@@ -393,9 +409,11 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
exynos_set_delayed_reset_assertion(true);
- if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
- scu_enable(scu_base_addr());
-
+ if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
+ /* if exynos_scu_enable fails, return */
+ if (exynos_scu_enable())
+ return;
+ }
/*
* Write the address of secondary startup into the
* system-wide flags register. The boot monitor waits
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 487295f..23db2af 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -18,6 +18,7 @@
#include <linux/cpu_pm.h>
#include <linux/io.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/soc/samsung/exynos-regs-pmu.h>
#include <linux/soc/samsung/exynos-pmu.h>
@@ -26,8 +27,6 @@
#include <asm/suspend.h>
#include <asm/cacheflush.h>
-#include <mach/map.h>
-
#include "common.h"
static inline void __iomem *exynos_boot_vector_addr(void)
@@ -177,7 +176,7 @@ void exynos_enter_aftr(void)
cpu_suspend(0, exynos_aftr_finisher);
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
- scu_enable(S5P_VA_SCU);
+ exynos_scu_enable();
if (call_firmware_op(resume) == -ENOSYS)
exynos_cpu_restore_register();
}
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 06332f6..c73c857 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -34,8 +34,6 @@
#include <asm/smp_scu.h>
#include <asm/suspend.h>
-#include <mach/map.h>
-
#include <plat/pm-common.h>
#include "common.h"
@@ -461,12 +459,11 @@ static void exynos_pm_resume(void)
/* For release retention */
exynos_pm_release_retention();
- if (cpuid == ARM_CPU_PART_CORTEX_A9)
- scu_enable(S5P_VA_SCU);
-
- if (call_firmware_op(resume) == -ENOSYS
- && cpuid == ARM_CPU_PART_CORTEX_A9)
- exynos_cpu_restore_register();
+ if (cpuid == ARM_CPU_PART_CORTEX_A9) {
+ exynos_scu_enable();
+ if (call_firmware_op(resume) == -ENOSYS)
+ exynos_cpu_restore_register();
+ }
early_wakeup:
diff --git a/arch/arm/plat-samsung/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h
index 0fe2828..512ed1f 100644
--- a/arch/arm/plat-samsung/include/plat/map-s5p.h
+++ b/arch/arm/plat-samsung/include/plat/map-s5p.h
@@ -15,10 +15,6 @@
#define S5P_VA_CHIPID S3C_ADDR(0x02000000)
-#define S5P_VA_COREPERI_BASE S3C_ADDR(0x02800000)
-#define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x))
-#define S5P_VA_SCU S5P_VA_COREPERI(0x0)
-
#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
#define VA_VIC0 VA_VIC(0)
#define VA_VIC1 VA_VIC(1)
--
2.7.4
More information about the linux-arm-kernel
mailing list