[PATCH 1/3] ARM: dts: rename MSM8660/APQ8060 pmicintc to pm8058

[Bjorn Andersson]

On Thu 03 Nov 02:13 PDT 2016, Linus Walleij wrote:

> The name "pmicintc" is ambiguous: there is a second power
> management IC named PM8901 on these systems, and it is also
> an interrupt controller. To make things clear, just name the
> node alias "pm8058", this in unambigous and has all information
> we need.
> 
> Signed-off-by: Linus Walleij <linus.walleij at linaro.org>

Acked-by: Bjorn Andersson <bjorn.andersson at linaro.org>

Regards,
Bjorn

> ---
>  arch/arm/boot/dts/qcom-apq8060-dragonboard.dts |  2 +-
>  arch/arm/boot/dts/qcom-msm8660-surf.dts        |  2 +-
>  arch/arm/boot/dts/qcom-msm8660.dtsi            | 12 ++++++------
>  3 files changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
> index 4b8872cc8bf9..4a532ddab53a 100644
> --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
> +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
> @@ -412,7 +412,7 @@
>  				 * The second interrupt is the PME interrupt
>  				 * for network wakeup, connected to the TLMM.
>  				 */
> -				interrupts-extended = <&pmicintc 198 IRQ_TYPE_EDGE_FALLING>,
> +				interrupts-extended = <&pm8058 198 IRQ_TYPE_EDGE_FALLING>,
>  						    <&tlmm 29 IRQ_TYPE_EDGE_RISING>;
>  				reset-gpios = <&tlmm 30 GPIO_ACTIVE_LOW>;
>  				vdd33a-supply = <&dragon_veth>;
> diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
> index 23de764558ab..1adc04978a47 100644
> --- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
> +++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
> @@ -48,7 +48,7 @@
>  	};
>  };
>  
> -&pmicintc {
> +&pm8058 {
>  	keypad at 148 {
>  		linux,keymap = <
>  			MATRIX_KEY(0, 0, KEY_FN_F1)
> diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
> index 4d828f810746..91c9a62ae725 100644
> --- a/arch/arm/boot/dts/qcom-msm8660.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
> @@ -163,7 +163,7 @@
>  			reg = <0x500000 0x1000>;
>  			qcom,controller-type = "pmic-arbiter";
>  
> -			pmicintc: pmic at 0 {
> +			pm8058: pmic at 0 {
>  				compatible = "qcom,pm8058";
>  				interrupt-parent = <&tlmm>;
>  				interrupts = <88 8>;
> @@ -176,7 +176,7 @@
>  					compatible = "qcom,pm8058-gpio",
>  						     "qcom,ssbi-gpio";
>  					reg = <0x150>;
> -					interrupt-parent = <&pmicintc>;
> +					interrupt-parent = <&pm8058>;
>  					interrupts = <192 IRQ_TYPE_NONE>,
>  						     <193 IRQ_TYPE_NONE>,
>  						     <194 IRQ_TYPE_NONE>,
> @@ -232,7 +232,7 @@
>  					reg = <0x50>;
>  					gpio-controller;
>  					#gpio-cells = <2>;
> -					interrupt-parent = <&pmicintc>;
> +					interrupt-parent = <&pm8058>;
>  					interrupts =
>  					<128 IRQ_TYPE_NONE>,
>  					<129 IRQ_TYPE_NONE>,
> @@ -251,7 +251,7 @@
>  				pwrkey at 1c {
>  					compatible = "qcom,pm8058-pwrkey";
>  					reg = <0x1c>;
> -					interrupt-parent = <&pmicintc>;
> +					interrupt-parent = <&pm8058>;
>  					interrupts = <50 1>, <51 1>;
>  					debounce = <15625>;
>  					pull-up;
> @@ -260,7 +260,7 @@
>  				keypad at 148 {
>  					compatible = "qcom,pm8058-keypad";
>  					reg = <0x148>;
> -					interrupt-parent = <&pmicintc>;
> +					interrupt-parent = <&pm8058>;
>  					interrupts = <74 1>, <75 1>;
>  					debounce = <15>;
>  					scan-delay = <32>;
> @@ -270,7 +270,7 @@
>  				rtc at 1e8 {
>  					compatible = "qcom,pm8058-rtc";
>  					reg = <0x1e8>;
> -					interrupt-parent = <&pmicintc>;
> +					interrupt-parent = <&pm8058>;
>  					interrupts = <39 1>;
>  					allow-set-time;
>  				};
> -- 
> 2.7.4
>