[PATCH v8 4/9] pwm: pwm-tiecap: Update dt binding document to use proper unit address

[Rob Herring]

On Tue, May 03, 2016 at 10:56:50AM -0500, Franklin S Cooper Jr wrote:
> Replace unit address from 0 to the proper physical address. Also insure
> that the unit address matches the reg property address.
> 
> Signed-off-by: Franklin S Cooper Jr <fcooper at ti.com>
> ---
>  Documentation/devicetree/bindings/pwm/pwm-tiecap.txt | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)

Acked-by: Rob Herring <robh at kernel.org>

> 
> diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
> index 788da6c..0d47354 100644
> --- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
> +++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
> @@ -16,22 +16,22 @@ Optional properties:
>  
>  Example:
>  
> -ecap0: ecap at 0 { /* ECAP on am33xx */
> +ecap0: ecap at 48300100 { /* ECAP on am33xx */
>  	compatible = "ti,am33xx-ecap";
>  	#pwm-cells = <3>;
>  	reg = <0x48300100 0x80>;
>  	ti,hwmods = "ecap0";
>  };
>  
> -ecap0: ecap at 0 { /* ECAP on am4372 */
> +ecap0: ecap at 48300100 { /* ECAP on am4372 */
>  	compatible = "ti,am4372-ecap", "ti,am33xx-ecap";
>  	#pwm-cells = <3>;
>  	reg = <0x48300100 0x80>;
>  	ti,hwmods = "ecap0";
>  };
>  
> -ecap0: ecap at 0 { /* ECAP on da850 */
> +ecap0: ecap at 1f06000 { /* ECAP on da850 */
>  	compatible = "ti,da850-ecap", "ti,am33xx-ecap";
>  	#pwm-cells = <3>;
> -	reg = <0x306000 0x80>;
> +	reg = <0x1f06000 0x80>;
>  };
> -- 
> 2.7.0
>