[PATCH v8 4/9] pwm: pwm-tiecap: Update dt binding document to use proper unit address

[Franklin S Cooper Jr]

Replace unit address from 0 to the proper physical address. Also insure
that the unit address matches the reg property address.

Signed-off-by: Franklin S Cooper Jr <fcooper at ti.com>
---
 Documentation/devicetree/bindings/pwm/pwm-tiecap.txt | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
index 788da6c..0d47354 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
@@ -16,22 +16,22 @@ Optional properties:
 
 Example:
 
-ecap0: ecap at 0 { /* ECAP on am33xx */
+ecap0: ecap at 48300100 { /* ECAP on am33xx */
 	compatible = "ti,am33xx-ecap";
 	#pwm-cells = <3>;
 	reg = <0x48300100 0x80>;
 	ti,hwmods = "ecap0";
 };
 
-ecap0: ecap at 0 { /* ECAP on am4372 */
+ecap0: ecap at 48300100 { /* ECAP on am4372 */
 	compatible = "ti,am4372-ecap", "ti,am33xx-ecap";
 	#pwm-cells = <3>;
 	reg = <0x48300100 0x80>;
 	ti,hwmods = "ecap0";
 };
 
-ecap0: ecap at 0 { /* ECAP on da850 */
+ecap0: ecap at 1f06000 { /* ECAP on da850 */
 	compatible = "ti,da850-ecap", "ti,am33xx-ecap";
 	#pwm-cells = <3>;
-	reg = <0x306000 0x80>;
+	reg = <0x1f06000 0x80>;
 };
-- 
2.7.0